Necrotic

Thanks for this, I was able to try this now that I am back. I found a place in sab where it asked me for permissions so I set it to 777 (it didn't specify if its for files or folders, but per the hint it seems to be folders) Couch was straightforward as well, just updated this part: For Sonarr I found the permission part as well, changed it to 777. Anyone with experience setting this up can you provide feedback on following: - Do I need to click on the set permission tickbox to get it to work? - Should I also set the chown Group to 100?

That worked, Thanks!. I guess it wasn't related to the new user but some other misconfiguration? Its either Sab or couch...

Hi Frank, I did this as it was recommended on one of the posts to prepare for the future but now I can't delete stuff on the share. How do I fix this? do I need to upgrade the permission on my user?

Might be a good idea to explain what you mean by each suggested option for the less knowledgeable.

Is the T even worth it? as far as I heard, the idle power is the same and it just placed limits on how high it would clock (to keep within a specific power envelope)

Just bought my first manufacturer refurbished drive (20TB X20 Seagate) with these guys and so far so good. I just finished running it thru pre-clear just to be sure and came thru with flying colors. I will likely use them in the future if they have good deals.

A different person already took care of this, I believe ich may have helped him and is quite busy trying to maintain all these different ones already. I hope its ok to post this:

Well, not really sure what you are trying to do here but that CPU is quite old. Basically it has 4 cores that would all be P cores, the newer cpu's they added e-cores that are smaller but also means it consumes less power when running. As for how the cores behave, usually they are all the same (of which you have 4). They have boost capabilities, which drive it higher than the standard core speed up to a certain limit. As you load up the core, it should boost up. If you load up all the cores, it will boost all of them but perhaps a little less each since it tries to work within a certain power/heat envelope.

Any idea what is going on here? [14.08.2023 12:00:48] Backup of appData starting. This may take awhile [14.08.2023 12:00:48] Not stopping 7DaysToDie: Not started! [ / Exited (143) 5 months ago] [14.08.2023 12:00:48] Not stopping binhex-delugevpn: Not started! [ / Created] [14.08.2023 12:00:48] Stopping cadvisor... done! (took 1 seconds) [14.08.2023 12:00:49] Stopping couchpotato... done! (took 3 seconds) [14.08.2023 12:00:52] Not stopping CSMM-7DtD: Not started! [ / Exited (143) 4 months ago] [14.08.2023 12:00:52] Stopping duckdns... done! (took 5 seconds) [14.08.2023 12:00:57] Stopping EmbyServer... done! (took 4 seconds) [14.08.2023 12:01:01] Stopping headphones... done! (took 4 seconds) [14.08.2023 12:01:05] Stopping muximux... done! (took 5 seconds) [14.08.2023 12:01:10] Not stopping NginxProxyManager: Not started! [ / Created] [14.08.2023 12:01:10] Stopping nzbhydra2... done! (took 4 seconds) [14.08.2023 12:01:14] Stopping openvpn-as... done! (took 4 seconds) [14.08.2023 12:01:18] Not stopping radarr: Not started! [ / Created] [14.08.2023 12:01:18] Stopping sabnzbd... done! (took 5 seconds) [14.08.2023 12:01:23] Not stopping Satisfactory: Not started! [ / Exited (137) 5 months ago] [14.08.2023 12:01:23] Stopping sonarr... done! (took 4 seconds) [14.08.2023 12:01:27] Not stopping youtube-dl-server: Not started! [ / Exited (0) 8 months ago] [14.08.2023 12:01:27] Backing Up appData from /mnt/cache/appdata/ to /mnt/user/Backup/appdata backup/[email protected] [14.08.2023 12:01:27] Separate archives disabled! Saving into one file. [14.08.2023 12:01:27] Backing Up [14.08.2023 12:33:52] Verifying Backup ./syslog-192.168.1.100.log: Mod time differs ./syslog-192.168.1.100.log: Size differs [14.08.2023 12:41:11] tar verify failed! [14.08.2023 12:41:11] done [14.08.2023 12:41:11] Starting duckdns... (try #1) done! [14.08.2023 12:41:14] Starting nzbhydra2... (try #1) done! [14.08.2023 12:41:16] Starting cadvisor... (try #1) done! [14.08.2023 12:41:19] Starting couchpotato... (try #1) done! [14.08.2023 12:41:22] Starting EmbyServer... (try #1) done! [14.08.2023 12:41:25] Starting headphones... (try #1) done! [14.08.2023 12:41:27] Starting muximux... (try #1) done! [14.08.2023 12:41:30] Starting sabnzbd... (try #1) done! [14.08.2023 12:41:33] Starting openvpn-as... (try #1) done! [14.08.2023 12:41:36] Starting sonarr... (try #1) done! [14.08.2023 12:41:40] A error occurred somewhere. Not deleting old backup sets of appdata [14.08.2023 12:41:40] Backup / Restore Completed

I get it, maybe not a default setting but an option with a giant warning all over it would be enough. In any case, great job with this and the other stuff, I still use the gameservers

Hi, probably been brought up before but I think the lower power state would be a good thing to be built into the plugin when possible: PS. Great work on this as usual!

32GB of ram....because I am running on an old B75 motherboard which has that as max. Needed the max ram to run a docker for satisfactory.

This link has in-depth suggestions for PSU including quality ratings of specific variants/years and any comments of failures reported by people. I originally saw this on LTT forums and seems they have move it to their own website. Highly recommend you check this out when buying a PSU. https://cultists.network/140/psu-tier-list/

Ah sorry, yes when I start it, it did update SteamCMD and the satisfactory in general. What I was wondering is for the docker itself, it shows as unlinked so say if you change something in the docker I guess it doesn't update to your changes?

Hmm no, this container has been there with its folder for a long time. I haven't re-installed the container at all. Is this a new requirement? Do I just remove the folder and docker, add it back, start it and then copy over the savefile as well as the config file?

Question: Is this right? seems the update for the docker is unlinked which makes me think something in my config is off

You need to look more into how mythtv is doing its encoding (settings, options, etc). With that much CPU consumption I would think that its doing software encoding and probably some high bitrate or high quality settings. Need to check if you need to do anything to get it to use quicksync to offload then I think it would be ok. Still this is only unraid, I think more research is needed on the mythtv side.

You seem to have other stuff going on so I am unsure if this will help. I had 2 drives with RiserFS but overall everything was working, still I wanted to standardize on XFS for all. The way I did it was that when I added a new drive that was bigger, I used unBalance which is an app/plugin you can get thru CA. Then I moved all the files off the first old drive into the new one, wiped the old one and reformatted to XFS, then moved the files from the second old drive to the reformatted one then I reformatted the second.

Here is my oldest one, 2 other drives around the same time. WD RED 3TB for all 3, I have another one about a year newer and then a series of drives after that.

A @SpaceInvaderOne video on this would be awesome

So I am not entirely sure what was going on. I must've restarted the container like 20 times. Sometimes it looked as if it was updated steamcmd, other times not (I am not sure if the update was failing or something). In any case, I simply enabled the validation, ran it once until it loaded right, then disabled validation. Not running experimental as far as I know (I see no flags for it).

So for Satisfactory I am getting a version mismatch. I have tried re-starting the docker repeatedly, several times it looked as if it was updating SteamCMD but it doesn't do that anymore. Still my game version is 177909 while server is 176027. I have no idea how to fix or force an update. Edit: Nevermind, I edited the parameters of the docker and set the validate to true. That seems to have forced the change.

So I was wondering, does this work if you haven't started the array? (ie stuff like dockers dont work until then) I was just wondering as I have it set in case of power loss for it to restart on power, but I need to log-in to start the array, would this let me do this remote?

Just wanted to chime in and say great work. Thank you so much for what you do!

I mean a simple male to female stubby one would be fine, we already have sata extensions to daisy chain stuff and this wouldn't even have a cable...