-
v7.2.3 Appdata cache/FS screwed - no longer accepting good working drive
Thanks for your help. blkdiscard -f was the command needed to get the drive back into a working state.
-
v7.2.3 Appdata cache/FS screwed - no longer accepting good working drive
Ah mounted it to pull the data. Will unmount and try again. The gui just cycles over and over, doesnt give too much to go on.
-
v7.2.3 Appdata cache/FS screwed - no longer accepting good working drive
New diag attached. Re did commands above and then tried to format drives but unsuccessful. unraid-diagnostics-20260313-1823.zip
-
v7.2.3 Appdata cache/FS screwed - no longer accepting good working drive
Have tried that. Even did a new config.
-
v7.2.3 Appdata cache/FS screwed - no longer accepting good working drive
How do I get unraid to accept the disks as brand new like they've never seen them before?
-
v7.2.3 Appdata cache/FS screwed - no longer accepting good working drive
How would that break the pool and btrfs? I tried to just go nuclear and did the new config and wiped the disks but it still won't mount the drives. This is as a brand new pool with wiped disks but it just loops and asks to format the drives over and over. It's like unraid has blacklisted the disks? unraid-diagnostics-20260311-2053.zip
-
v7.2.3 Appdata cache/FS screwed - no longer accepting good working drive
OK, so that has at least allowed the fs to mount but I think the 54GB is correct as thats what it was originally before all of this. Not sure what the extra 30GB is? Or I could be wrong. Things aren't working though as docker wont start. unraid-diagnostics-20260311-0913.zip
-
v7.2.3 Appdata cache/FS screwed - no longer accepting good working drive
So I can successfully mount /dev/sdh1 from the unassigned device and browse this. But mounting /dev/sdg1 give this error: Mar 11 00:49:44 Ragnarok unassigned.devices: Mounting partition 'sdg1' at mountpoint '/mnt/disks/S2R9NX0J522893R'... Mar 11 00:49:44 Ragnarok unassigned.devices: Mount cmd: /sbin/mount -t 'btrfs' -o rw,relatime,space_cache=v2,discard '/dev/sdg1' '/mnt/disks/S2R9NX0J522893R' Mar 11 00:49:44 Ragnarok kernel: BTRFS info (device sdg1): first mount of filesystem e4152190-aeeb-4c91-b1c1-6e222b394f50 Mar 11 00:49:44 Ragnarok kernel: BTRFS info (device sdg1): using crc32c (crc32c-intel) checksum algorithm Mar 11 00:49:44 Ragnarok kernel: BTRFS error (device sdg1): devid 2 uuid bac53136-eb52-4ea8-bf24-11b25eb40fe5 is missing Mar 11 00:49:44 Ragnarok kernel: BTRFS error (device sdg1): failed to read chunk tree: -2 Mar 11 00:49:44 Ragnarok kernel: BTRFS error (device sdg1): open_ctree failed: -2 Mar 11 00:49:44 Ragnarok unassigned.devices: Mount of 'sdg1' failed: 'mount: /mnt/disks/S2R9NX0J522893R: mount() failed: No such file or directory. dmesg(1) may have more information after failed mount system call.'
-
v7.2.3 Appdata cache/FS screwed - no longer accepting good working drive
Label: none uuid: b87d8b7b-fbe0-4260-8dbd-05b70b3f9ce7 Total devices 2 FS bytes used 552.59GiB devid 1 size 931.51GiB used 618.03GiB path /dev/nvme0n1p1 devid 2 size 931.51GiB used 618.03GiB path /dev/nvme1n1p1 Label: none uuid: a36906f0-74ea-4479-b57b-fee2e8aec608 Total devices 1 FS bytes used 440.00KiB devid 1 size 1.00GiB used 126.38MiB path /dev/loop2 Label: none uuid: e4152190-aeeb-4c91-b1c1-6e222b394f50 Total devices 2 FS bytes used 77.58GiB devid 1 size 465.76GiB used 84.03GiB path /dev/sdg1 devid 2 size 465.76GiB used 54.06GiB path /dev/sdh1 I've removed the pool so I can start the array and get to my shares if that changes anything in those results.
-
v7.2.3 Appdata cache/FS screwed - no longer accepting good working drive
Even if I redo the Pool on reboot it has a mare: 19Z was in slot one whenever I create the pool and then on reboot it says it is wrong because it drops that disk completely on array start up. The "wrong" is wrong or more so unraid is very confused.
-
v7.2.3 Appdata cache/FS screwed - no longer accepting good working drive
diag attached. unraid-diagnostics-20260310-1558.zip
-
v7.2.3 Appdata cache/FS screwed - no longer accepting good working drive
Initially had what looked like a faulty sata cable, removed the disk and re-balanced back to the one disk. Have replaced the cable and on adding the drive back in, it's all turned to custard. Initial steps were: Re-added drive to appdata cache pool, prompted for a format of the disk. Ticked Yes. Array started and says the appdata cache pool is unmountable/readable fs. I thought it should automatically pick this up and set it up as raid1, it's done this for me in the past. Assume it as a v7 bug, which on googling looks like it might be? Rebooted the array and then got this: Wrong Pool State appcache - too many wrong or missing devices Found a few posts about this to remove the pool and re-add it back but in doing so when the array starts, it just comes back with no drive found in the 2nd slot(the original good disk with data) which is assigned to slot one but shows as missing from slot 2. If i remove the pool again, I just get the same.
-
-
Ran update 6.12.14 and now two shares showing "This share is invalid; It references storage that does not exist"
Also occurs for 6.12.15 Flagged all my Array shares with this error. As suggested dummy change fixes it.
-
Unable to access Unraid Portal/Dockers after loss of internet connection
I'll do a manual disconnect and grab logs again.
-
Unable to access Unraid Portal/Dockers after loss of internet connection
Diags attached. ragnarok-diagnostics-20240218-2325.zip
Distorter
Members
-
Joined
-
Last visited