ryouksan

WIll try that, thank you for the answer.

Hello everyone, I need help figuring out if it is a bad disk or this can be caused by a faulty motherboard sata port or faulty cable. I get this sort of errors a couple of times a week and sometimes the server gets pretty slow. Diagnostics file is attached.serverdrone-diagnostics-20240210-0902.zip

Thank you for the answer, I will try to test the ssd and eventually change it then.

Good morning, I'm having issues with transfer speeds from windows pc to unraid share. I've been reading the forum for the past week and haven't been able to solve my problem, tried direct IO on, jumbo packets, turbo write enabled and don't know what else. when I copy a large document from windows to unraid it peaks at about 1100 MB/s and then drops to under 100 MB/s iperf3 performs just fine: C:\Tools>iperf3.exe -c 169.254.173.238 Connecting to host 169.254.173.238, port 5201 [ 4] local 169.254.239.111 port 50008 connected to 169.254.173.238 port 5201 [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.00 sec 1.09 GBytes 9.37 Gbits/sec [ 4] 1.00-2.00 sec 1.09 GBytes 9.36 Gbits/sec [ 4] 2.00-3.00 sec 1.09 GBytes 9.37 Gbits/sec [ 4] 3.00-4.00 sec 1.09 GBytes 9.34 Gbits/sec [ 4] 4.00-5.00 sec 1.09 GBytes 9.36 Gbits/sec [ 4] 5.00-6.00 sec 1.09 GBytes 9.39 Gbits/sec [ 4] 6.00-7.00 sec 1.09 GBytes 9.38 Gbits/sec [ 4] 7.00-8.00 sec 1.09 GBytes 9.35 Gbits/sec [ 4] 8.00-9.00 sec 1.09 GBytes 9.34 Gbits/sec [ 4] 9.00-10.00 sec 1.09 GBytes 9.32 Gbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth [ 4] 0.00-10.00 sec 10.9 GBytes 9.36 Gbits/sec sender [ 4] 0.00-10.00 sec 10.9 GBytes 9.36 Gbits/sec receiver iperf Done. serverdrone-diagnostics-20221207-1144.zip

Disabling ASPM stopped the log from being filled with the error, thank you!

Is it possible that this is a pcie lane going to a usb device? The only change since the last check was that I connected the UPS via USB port.

There was a power cut about two weeks ago, but since then it has been on an ups so it doesn't happen again. I'll try restarting properly and recheck parity

Last parity check turned out to be valid but with 55422 errors, should I do something about it? should I be worried? serverdrone-diagnostics-20221102-1249.zip