gazz575

Hi, I shutdown the Unraid server for a couple of days with Plex working before shutdown. On startup I cant access webui from webpage or from Smart Tv. I restarted the docker image as well as the server as a hail mary. Not sure where to go from here. Ive attached the diagnostic file. Thanks for your time tower-diagnostics-20220721-2000.zip

Ok so Ive gotten it working by changing bios to legacy boot from uefi thanks

I have followed the guide and run touch /boot/config/modprobe.d/ast.conf and can see the ast.conf file on flashdrive. Have rebooted and still do not have a GUI, only the flashing cursor. Have I missed something?

Ive tried 2 GPU's Nvidia 1060 and Nvidia GT520

Hi all, I have just tried to access the system GUI directly ie plugging hdmi from server to monitor and only get the flashing cursor. I havent tried to use the GUI for quite some time (a few unraid versions ago currently 6.9.2) it did work in the past. I have searched the forum and have tried booting to safemode gui and nomodeset without any luck. The webgui works fine not sure what to try next. Diagnostics below Any help would be appreciated cheers tower-diagnostics-20210822-1036.zip

Nevermind my last, I just went into unraid network settings and changed its dns setting from the router to 8.8.8.8 and now everything seems to be working! thanks Squid and JorgeB for your help, I was truly stumped

So following Squids advice I found that I forgot my router was using pi hole docker as primary dns and 1.1.1.1 as secondary. Since docker was not working it seems unraid did not look at secondary dns. I managed to download previous docker images however am getting an input/output error on all the images I try to install. I tried installing a docker I did not previously have with same result. I have restarted the router, and run docker safe new permissions I did manage to get the docker airconnect installed, but this seems to be the exception. Ive attached a word.doc with copy of output from trying to reinstall dockers, again any help is appreciated thanks Docker image putl.docx

Any ideas as to what I should do next, any help is appreciated thanks

I tried reinstalled a few previous docker containers and all failed similar to Krusader following: Command:root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='binhex-krusader' --net='bridge' --cpuset-cpus='4,14' --privileged=true -e TZ="Australia/Sydney" -e HOST_OS="Unraid" -e 'TEMP_FOLDER'='/config/krusader/tmp' -e 'WEBPAGE_TITLE'='Tower' -e 'VNC_PASSWORD'='' -e 'UMASK'='000' -e 'PUID'='99' -e 'PGID'='100' -p '6080:6080/tcp' -v '/mnt/user':'/media':'rw' -v '/mnt/disks/':'/UNASSIGNED':'rw' -v '/boot/':'/FLASH':'rw' -v '/mnt/user/appdata/binhex-krusader':'/config':'rw' 'binhex/arch-krusader' Unable to find image 'binhex/arch-krusader:latest' locally docker: Error response from daemon: Get https://registry-1.docker.io/v2/: dial tcp: lookup registry-1.docker.io on 192.168.1.1:53: read udp 192.168.1.117:56464->192.168.1.1:53: i/o timeout. See 'docker run --help'. The command failed.

Updated to 6.9.2 and unraid showing No docker containers installed. Tried reverting back to 6.8.3, still shows no dockers, have gone back to 6.9.2 with same issue, any ideas what to do? Diagnostic included, thanks tower-diagnostics-20210516-2023.zip

Thank you, Ive reassigned cache and will copy whats on missing data drive to working array then add the drive to array. Thanks again

My flash drive failed, I had an older backup but Im guessing its from a time before I had a cache ssd drive and a new data drive. Both these are showing up as unassigned devices. I have no dockers as I believe these were on the cache drive along with appdata. Not sure how to fix this, any help would be appreciated. tower-diagnostics-20200211-1634.zip

That worked!, thank you very much

Hi, I was trying to open Krusader and was getting an error so rebooted Unraid, now showing docker service failed to start and none of my VM's are showing up. My docker size was 25Gb and I increased its size to 30Gb. I recently added another drive to unraid as my other 2 were starting to fill up. Also recently upgraded cache to 500Gb but that is also full. Not quite sure what to do next, have included diagnostics. thanks tower-diagnostics-20191107-0707.zip

Changed Status to Solved