rukiddin

I had a problem like this once, it turned out to be the power supply. Just that 1 extra drive, and things didn't work right. Beefed up the power supply and I was able to move on. Good luck

I've been using Nextcloud on my Unraid server uneventfully for the last couple of years. I recently realized it wasn't working. I get the following screen message when I try to access it locally: Internal Server Error The server encountered an internal error and was unable to complete your request. Please contact the server administrator if this error reappears multiple times, please include the technical details below in your report. More details can be found in the server log. If I run the command sudo -u abc php /config/www/nextcloud/console.php file:scan --all I get the following: An unhandled exception has been thrown: Doctrine\DBAL\Exception: Failed to connect to the database: An exception occurred while executing a query: SQLSTATE[HY000]: General error: 14 unable to open database file in /config/www/nextcloud/lib/private/DB/Connection.php:87 Stack trace: #0 /config/www/nextcloud/3rdparty/doctrine/dbal/src/Connection.php(1519): OC\DB\Connection->connect() #1 /config/www/nextcloud/3rdparty/doctrine/dbal/src/Connection.php(1041): Doctrine\DBAL\Connection->getWrappedConnection() #2 /config/www/nextcloud/lib/private/DB/Connection.php(236): Doctrine\DBAL\Connection->executeQuery() #3 /config/www/nextcloud/3rdparty/doctrine/dbal/src/Query/QueryBuilder.php(345): OC\DB\Connection->executeQuery() #4 /config/www/nextcloud/lib/private/DB/QueryBuilder/QueryBuilder.php(287): Doctrine\DBAL\Query\QueryBuilder->execute() #5 /config/www/nextcloud/lib/private/AppConfig.php(344): OC\DB\QueryBuilder\QueryBuilder->execute() #6 /config/www/nextcloud/lib/private/AppConfig.php(109): OC\AppConfig->loadConfigValues() #7 /config/www/nextcloud/lib/private/AppConfig.php(300): OC\AppConfig->getApps() #8 /config/www/nextcloud/lib/private/legacy/OC_App.php(971): OC\AppConfig->getValues() #9 /config/www/nextcloud/lib/private/Server.php(687): OC_App::getAppVersions() #10 /config/www/nextcloud/lib/private/AppFramework/Utility/SimpleContainer.php(160): OC\Server->OC\{closure}() #11 /config/www/nextcloud/3rdparty/pimple/pimple/src/Pimple/Container.php(118): OC\AppFramework\Utility\SimpleContainer->OC\AppFramework\Utility\{closure}() #12 /config/www/nextcloud/lib/private/AppFramework/Utility/SimpleContainer.php(127): Pimple\Container->offsetGet() #13 /config/www/nextcloud/lib/private/ServerContainer.php(136): OC\AppFramework\Utility\SimpleContainer->query() #14 /config/www/nextcloud/lib/private/AppFramework/Utility/SimpleContainer.php(56): OC\ServerContainer->query() #15 /config/www/nextcloud/lib/private/AppFramework/Utility/SimpleContainer.php(182): OC\AppFramework\Utility\SimpleContainer->get() #16 /config/www/nextcloud/lib/private/AppFramework/Utility/SimpleContainer.php(160): OC\AppFramework\Utility\SimpleContainer->OC\AppFramework\Utility\{closure}() #17 /config/www/nextcloud/3rdparty/pimple/pimple/src/Pimple/Container.php(114): OC\AppFramework\Utility\SimpleContainer->OC\AppFramework\Utility\{closure}() #18 /config/www/nextcloud/lib/private/AppFramework/Utility/SimpleContainer.php(127): Pimple\Container->offsetGet() #19 /config/www/nextcloud/lib/private/ServerContainer.php(136): OC\AppFramework\Utility\SimpleContainer->query() #20 /config/www/nextcloud/lib/private/AppFramework/Utility/SimpleContainer.php(56): OC\ServerContainer->query() #21 /config/www/nextcloud/lib/private/Server.php(1064): OC\AppFramework\Utility\SimpleContainer->get() #22 /config/www/nextcloud/lib/private/AppFramework/Utility/SimpleContainer.php(160): OC\Server->OC\{closure}() #23 /config/www/nextcloud/3rdparty/pimple/pimple/src/Pimple/Container.php(118): OC\AppFramework\Utility\SimpleContainer->OC\AppFramework\Utility\{closure}() #24 /config/www/nextcloud/lib/private/AppFramework/Utility/SimpleContainer.php(127): Pimple\Container->offsetGet() #25 /config/www/nextcloud/lib/private/ServerContainer.php(136): OC\AppFramework\Utility\SimpleContainer->query() #26 /config/www/nextcloud/lib/private/AppFramework/Utility/SimpleContainer.php(56): OC\ServerContainer->query() #27 /config/www/nextcloud/lib/private/Server.php(2024): OC\AppFramework\Utility\SimpleContainer->get() #28 /config/www/nextcloud/lib/private/Files/View.php(118): OC\Server->getLockingProvider() #29 /config/www/nextcloud/lib/private/Server.php(435): OC\Files\View->__construct() #30 /config/www/nextcloud/lib/private/AppFramework/Utility/SimpleContainer.php(160): OC\Server->OC\{closure}() #31 /config/www/nextcloud/3rdparty/pimple/pimple/src/Pimple/Container.php(118): OC\AppFramework\Utility\SimpleContainer->OC\AppFramework\Utility\{closure}() #32 /config/www/nextcloud/lib/private/AppFramework/Utility/SimpleContainer.php(127): Pimple\Container->offsetGet() #33 /config/www/nextcloud/lib/private/ServerContainer.php(136): OC\AppFramework\Utility\SimpleContainer->query() #34 /config/www/nextcloud/lib/private/AppFramework/Utility/SimpleContainer.php(56): OC\ServerContainer->query() #35 /config/www/nextcloud/lib/private/Server.php(1387): OC\AppFramework\Utility\SimpleContainer->get() #36 /config/www/nextcloud/lib/base.php(594): OC\Server->boot() #37 /config/www/nextcloud/lib/base.php(1089): OC::init() #38 /config/www/nextcloud/console.php(48): require_once('/config/www/nex...') #39 {main}root@ed996750eaf9:/# cd /config/www/nextcloud Can someone point me in the direction of what I can do to fix this? My MySQL skill is somewhat lacking. I'm hoping it might be a simple permission error. Thanks Mike

I'm also getting this error. I'm still runing UNRAID 6.9.2, I'm running the 9-22-2021 version of the plugin, the error displays at the bottom of every screen. I'm using the firefox in the GUI for Unraid, it's version is 73.0.1. I'll message you the diagnostics. Hope this helps. Love your plugin. Mike

I've got a couple of UNRAID servers, and have been very happy with them. My current configurations are generally built around 8TB shucked drives, mostly Seagate, my parity drive for instance is a Seagate Barracuda (ST8000DM004). I do have a mix of smaller drives thrown in there as well, mostly older 4TB shucked Seagate drives. One of my servers has 9 drives, and the other has 5 drives in the array. Anyhow, once drive prices come back to reality (hopefully in the not too distant future), I'll be upgrading to either 14TB or larger drives. Looking at my Parity Check, it's currently taking 18 hours at a speed of 123mb/s. My parity drive appears to be maintaining a 6.0Gbps link. I want to increase the throughput as much as possible so that I minimize the increase in my parity check time. What are the most cost effective ways of doing this? (Faster SATA controller, better motherboard, SATA cables, etc.) What are other people seeing in terms of their parity check run times? What should I expect a parity check, with a 14TB drive to take in terms of time? speed in mb/s? Thanks Mike

Hey all, This is a little strange. I've been running Windows 10 VM and an Ubuntu VM on the same machine now for about a year, with little to no problems. Recently, the Windows 10 VM is shutting down due to a lack of RAM, and it won't let me restart the VM without restarting the entire server. It almost seems like there is a memory leak. I'm running unraid 6.7.0 (I haven't updated further just because I don't want the performance hit with the new intel code) I have 16GB of ram on the i7 processor server. I can always add more ram, it's just strange to me that it all worked great until recently. I do run a fairly large number of dockers as well. My next step is to eliminate the ones I don't use as much. If anyone else has any ideas, I'd greatly appreciate a nudge in the right direction. Thanks Mike

Seems like the image clip needs to back up a bit before sending the image. I didn't want to choke my cellular by sending so many false positives.. Also, has anyone found a way to eliminate light effect? The biggest movement I get is when a car drives by and it's headlights light up my front door area (the light is the only movement). Causes false triggers all night long. Mike

Is anyone else having any success with getting the motion detection to work reliably? I get lots of notifications of motion, but there is rarely anything in the images that are sent to me. Also, when I deliberately stand in front of the camera and move around, I almost never get anything. thanks Mike

I'm having the same issue. The camera seems to work, and I've got it set to record when motion is detected. I get email notifications regarding motion, but nothing is saved to disk or included in the email. When I look at the config file it appears to have many locations to store various things (like logs), that should be stored in APPDATA but they aren't. Is this container completely functioning? Mike

Not sure if this has been reported.. Seems as though the plugin isn't able to log in to PLEX to check for updates. I'm getting the error: Unable to login to PlexPass with above credentials. I have checked and re-checked the credentials and they are correct, so it's either something with the plugin or something with the PLEX servers. I'm still a plugin guy. At least until Phaze says he's done supporting them. Mike

I have the same questions/concerns. Can someone provide a link or answer the question?

I'm getting the same error message on my terminal after updating.

The version I'm running says the IPV6 issue was already corrected: 21.09.2016: Fix problem introduced with latest gsm update and unraid refusal to support ipv6 18.09.2016: Corrected long standing error with network configuration. 13.08.2016: Rebase to ubuntu xenial. 10.09.2015: Inital release I'm using the new Community Applications plugin to manage the App, so I'd prefer not to go away from that. Mike p.s. thanks for all the help from everyone. I'll get there.

Ok, Just so you know, I've been working with port mappings and the such for nearly 15 years. I understand the concept, and know how they work and why they are necessary. What you are saying isn't making sense to me, but like you said, just do what CHBMB says. Well, reconfiguring plexpy's port mapping from 8181 to say 8381 doesn't change the port that Plexpy is actually using inside the container, which then requires further modifications, which I wasn't ready to committ to, so I just uninstalled it completely, and uninstalled and removed all the folders for TEAMSPEAK, and rebooted the server. So now, I only have TEAMSPEAK, and it's still ACTING exactly like it was before when I had plexpy running. Here are the logs, the current screen shot, on a FRESH install. The key error below to me is that it says 30033 is not an address supported by this protocol. I'm runing UNRAID 6.2 FINAL. 2016-09-25 20:02:45.527683|INFO |ServerLibPriv | |TeamSpeak 3 Server 3.0.13.4 (2016-08-29 12:39:04) 2016-09-25 20:02:45.527851|INFO |ServerLibPriv | |SystemInformation: Linux 4.4.19-unRAID #1 SMP PREEMPT Fri Aug 26 09:47:56 PDT 2016 x86_64 Binary: 64bit 2016-09-25 20:02:45.527902|INFO |ServerLibPriv | |Using hardware aes 2016-09-25 20:02:45.528882|INFO |DatabaseQuery | |dbPlugin name: SQLite3 plugin, Version 3, (c)TeamSpeak Systems GmbH 2016-09-25 20:02:45.528954|INFO |DatabaseQuery | |dbPlugin version: 3.11.1 2016-09-25 20:02:45.529543|INFO |DatabaseQuery | |checking database integrity (may take a while) 2016-09-25 20:02:45.544595|INFO |SQL | |db_CreateTables() tables created 2016-09-25 20:02:45.568498|WARNING |Accounting | |Unable to find valid license key, falling back to limited functionality 2016-09-25 20:02:45.970693|INFO | | |Puzzle precompute time: 387 2016-09-25 20:02:45.971751|ERROR |FileManager | |bind failed on :::30033; reason: Address family not supported by protocol 2016-09-25 20:02:45.971816|CRITICAL|VirtualSvrMgr | |Could not start file manager 258 no network port available

Let me get this straight. I had Plexpy installed and working, it defaults to using port 8181. I installed Teamspeak3 using the same Docker image. What your seeing is just what ports the docker had assigned. When I first installed Teamspeak3, it didn't show any ports being assigned, so I attempted to assign them. I don't see any documentation that shows Teamspeak3 using port 8181 by default anywhere, but I may have missed something. Is that a regular port for Teamspeak3? I will either remove Plexpy or create a new docker if that's the case. Do I need to just start a clean docker image and only install Teamspeak3 on that image? I have ran several dockers on the same image before, I didn't think I needed to do that. Thanks Mike p.s. on my first install attempt, I didn't change anything. (my first screenshot), that's just the way it installed. My second screenshot shows what I attempted to ADD, I haven't changed anything.

Also, i am still confused on where to find the "Use the command line log to get the privilege" Mike

Does Teamspeak use 8181? I think it's just showing what's already in use. After some tinkering, I now have the config page for the container looking like this (I preferred the old container config page look and feel better btw) Also, here are some logs 2016-09-25 19:22:04.239009|INFO |ServerLibPriv | |TeamSpeak 3 Server 3.0.13.4 (2016-08-29 12:39:04) 2016-09-25 19:22:04.239273|INFO |ServerLibPriv | |SystemInformation: Linux 4.4.19-unRAID #1 SMP PREEMPT Fri Aug 26 09:47:56 PDT 2016 x86_64 Binary: 64bit 2016-09-25 19:22:04.239333|INFO |ServerLibPriv | |Using hardware aes 2016-09-25 19:22:04.240141|INFO |DatabaseQuery | |dbPlugin name: SQLite3 plugin, Version 3, ©TeamSpeak Systems GmbH 2016-09-25 19:22:04.240227|INFO |DatabaseQuery | |dbPlugin version: 3.11.1 2016-09-25 19:22:04.240628|INFO |DatabaseQuery | |checking database integrity (may take a while) 2016-09-25 19:22:04.257260|WARNING |Accounting | |Unable to find valid license key, falling back to limited functionality 2016-09-25 19:22:04.696362|INFO | | |Puzzle precompute time: 424 2016-09-25 19:22:04.697314|ERROR |FileManager | |bind failed on :::30033; reason: Address family not supported by protocol 2016-09-25 19:22:04.697376|CRITICAL|VirtualSvrMgr | |Could not start file manager 258 no network port available Here's what my config screen looks like now after some tinkering.. The reason the TEAMSPEAK one is red, is that it's the current config I'm looking at.. when i look at Plexpy's config, it shows as read, and teamspeak is black, so I think that's ok.

OK, I'm new to Teamspeak, but not new to Dockers or UNRAID. Just trying to set up a Teamspeak server for my son. Anyhow.. I've attached my config screen. Under deployed ports, it shows PLEXPY which is another container I have installed and working fine. But the TEAMSPEAK shows up in RED. I'm assuming that's a bad thing. Do I need to define the ports? and if so which are the common ports to use for TEAMSPEAK? Thanks Mike

FYI.. Checked SABNZBD again today, and low and behold version 1.1.0 showed up again as a viable update. This time it downloaded and updated correctly, so all is good. just fyi

Yesterday I noticed that SABNZBD was reporting a new version available, so I checked the plugin and without thinking clicked upgrade. It should have upgraded to version 1.1.0 (the release), I had previously been running on a release candidate for 1.1.0. However, it downgraded to 1.0.3 I'm sure it's an update file location, or a naming issue. Just thought I'd report it. Thanks Mike

Latest PLEX plugin works great. Thanks very much for that. Has anyone reported the issue with the sabNZBD download? The plugin is showing an update to version 1.1.0Beta1 and when I click update, it failes, and on my UNRAID I get the error message ERROR 404: Not Found. Anyone else having this issue? Thanks Mike

When Time Machine attempts to backup my Mac, it fails saying there isn't enough disk space. When I first select the drive, it shows the proper amount of disk space (in this case 2.2TB of FREE space) but then after Time Machine attempts a backup it says something like ZERO KB of 1.01 MB available. So it appears that the Mac OS isn't seeing the correct disk space. I've tweak several of the UNRAID settings trying to find a solution, but I'm getting nowhere. I have about 280GB of data to backup, and there is plenty of space (over 2 TB available on the drive I've dedicated to Time Machine). It's probably a simple setting, but I'm not seeing it, and I can't find anything in the forums. The exact error I'm getting is "The backup disk needs 279.72 GB for the backup but only Zero KB are available. Select a larger backup disk or make the backup smaller by excluding files." I have the Time Machine Volume Limit Size set to 2 Terabytes, I've also left that setting blank and get the same error. Allocation method is set to High Water, Minimum Free Space is set to 1GB (but I've tried that set to blank as well) I have USE Cache disk set to NO, The volume I'm using is a reiserfs formatted volume. I'm running the latest UNRAID 6.1.9, and I'm running the latest Mac OS X 10.11.5 (El Capitan). I've had Time Machine working in the past, but haven't used it in over a year. Thanks in advance. Mike

Thanks for that info.. I'll look into the MOVER possibility. Another issue popped up this morning. May or may not be plugin related. The SABNZBD plugin is failing to download the latest "Beta" version. Getting a failed integrity check error. It's trying to download 1.0.0 RC5 Thanks Mike

I'm having a couple of issues with the SONARR plugin. Not sure if it's SONARR or the plugins fault. Figured I'd share here and let others weigh in. First, the most obvious issue, if SONARR updates within itself, the PHAZE plugin will show SONARR as not running after the update is complete. It's as if the plugin can't find the newer version. If I stop SONARR from within SONARR and restart it from the Plugin, it seems fine. However something isn't right, as that shouldn't happen. Second, and this has now happened to me twice. I woke up this morning, went to check on Sonarr and my other plugins, and I find that SONAR isn't running. I start it up manually and low and behold all my settings are GONE. My library is empty, everything I've set and tweaked is gone. It looks like a brand new install. This is the SECOND time this has happened to me. It's a little annoying. Again, not sure if this has to do with the plugin, but something isn't right. I can tell you that the plugin says there is an update available. I have both the plugin and the app set to check the DEVELOP branch for updates. I'm guessing there may be some relation to the first issue here. If SONARR updated itself automatically, then the PHAZE plugin wouldn't find it, but that doesn't explain why the data is all gone. Anyhow, if anyone else has run in to this, and knows how to prevent it from happening again, that would be great. Thanks Mike

Is it just me or is the SickRage team falling apart? Last couple of updates have more or less broken SickRage for me. I've tried installing on a new install, and it won't load old TV shows. My old install was acting wierd as well (shows not downloading, log file not updating, etc.). I'm going back to Sickbeard until it settles down. Does anyone know what's going on? Mike

Just a minor BUG to report.. I just update a friends UNRAID to 6.1.3 and reinstalled all his plugins, including Plex Media Server. When entering his Plex Pass credentials, I would get the following error Unable to login to PlexPass with above credentials. I looked at the Plexmediaserver.cfg file, and found that the password looked like this "'password'" I removed the ' ' from the password, and it worked fine. I've seen other people with this problem so I thought I'd share. Thanks for the great plugin. Mike