cnv

Selling my used Motherboard, ECU, Fan, and RAM combo. System ran flawlessly for years without issues. Intel Celeron E1500 Conroe Dual-Core 2.2 GHz LGA 775 65W BX80557E1500 Desktop Processor https://www.newegg.com/Product/Product.aspx?Item=N82E16819116075 Patriot Viper 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Dual Channel Kit Desktop Memory Model PVS34G1333ELKhttps://www.newegg.com/Product/Product.aspx?Item=N82E16820220372 SUPERMICRO MBD-C2SEE-O LGA 775 Intel G43 ATX Intel Motherboard https://www.newegg.com/Product/Product.aspx?Item=N82E16813182162 Asking $50 shipped OBO. I also have a Cooler Master CM Stacker ATX full tower case I will throw in if you cover shipping. It is big and heavy.

dgaschk, thanks for the help. I am replacing it as I speak.

Thanks for the replies. I unassigned the drive, reassigned it, and rebuilt it. Drive is currently working. The current SMART test lists the "Current_Pending_Sector RAW_VALUE" at "443". What does this mean? I also attached the current SMART.txt. thanks! smart.txt

I added three additional drives to my existing five drive unraid and then started the array and left it over night to finish. The array is now online but disk5 has a red ball next to it. I can still read off the disk. I've attached the syslog and SMART report of the drive. Any help would be appreciated. Thanks! syslog.txt smart.txt

Any speculations to why it is slow? I'm running a AMD Opteron 148 2.2ghz with a gig of ram which is under the recommended 3.0 ghz. Maybe its time for me to upgrade!

So I disconnected all the drives but two, a parity and one data. Everything is running fine for last 2 days. I deleted some files on unRaid and moved files from my computer onto the unRaid and no hiccups. Data trasfer is very slow at about 8mb a sec, but I think it has always been slow. I'm going to add a drive at a time and see what happens. BTW, what kind of transfer speeds do you guys see?

I'm in the process right now. Running two drives now and Parity Sync is in process... I'll get back if I ever find out the problem. Thanks for all the help everyone.

I ran a check on all drives and received no errors. BLKMGK, I don't know linux at all. How can I run this disk check? So I have been playing with the box and I'm having problems with all drives and not one particular drive like I assumed. I can read the drives and watch my movies with no problems, but as soon as I start to move files around it freezes. I was deleting individual files from a folder with no problems, but when I tried to delete the whole folder it froze. All data is there and is still accessable as long as I don't delete or move files. I'm thinking its hardware related and the system is just toast after the overheat. Do you guys think a new mobo/cpu will fix things?

Bill, I checked the bios and everything is still set on auto, so I reset the CMOS but the results are still the same. I think it is only the 5th drive giving me problems. I've been going through all the drives reading files, but as soon as I touch a certain folder on the 5th drive it freezes then gives me an "not accessible" and "network is unavailable" error. After the error the server is inaccessible for a little bit but then starts working again after I give it a few minutes. All other drives are working fine...

No worries Rob. The parity sync was definitely finished when I tried to access the server. That was my first guess too. I'll boot up the system and check it out again tonight.

I've been trying to run the test but have no luck. The test starts but doesn't display any results. Has anyone looked at my syslogs?

here is the syslog. I'm running the quick tests right now. Should the results be displayed on the monitor also, or only on the smart.txt?

LOL Bill. My box has been driving me nuts since day one! I think a noob like myself should have steered clear from something like unRaid but I found no other storage solution that didn't cost an arm and a leg! RobJ, is it too late? I rebooted my box several times already. So how do I access smartctl? I have a keyboard and monitor hooked up to the server right now.

My unRaid server overheated the other night big time. I had it running in the living room because I was adding new drives and had a guest over sleeping in the living room. He put a blanket over it because it was too loud and when I woke up it was very hot. The fan was blowing out hot air. I was unable to access the server through my computer and shut off the server. I waited an hour and rebooted it. It now runs extremely slow and can take an hour to just delete a few files totalling about 20 gigs. My 4th hard drive shows up but im unable to access it. Everything seems to work normally for only a little bit but then it lags out again. Is my hardware toast?

I have a Asus A8n-sli premium mobo which has 2 PCIe x16 slots, 1 PCIe x1, 1 PCIe x4, and 3 PCI slots. Need a cheap fanless video card so I can remove the noisy Geforce 7800GT. Any recommendations?