ir2lazy

Has anyone tried the LSI SAS 9201-8i? I see that the LSI SAS9201-16i is supported. The only difference I see is that it's only 2x4 instead of 4x4 SAS ports. I can't find much information on this device, even on LSI's site. The only info I found regarding this card is that - no cache, no BBU, possibly no NVRAM so IR mode may not work (IT only). They are going for $75 vs $100 for M1015/9211-8i that are coming from China (fakes?).

Has anyone tried using a 80mm to 120mm fan adapter to mount a push/pull AIO (Corsair H50) watercooler onto one of the 80mm fans or just using one 120mm fan istead of two 80mms?

I believe 8GB is overkill since Unraid is running x86 which maximum support is at 4GB. I do experience the same issue as you and looks like cache_dir is causing it on my end. syslogs.txt

I noticed the drive doesn't unmount when I stop the array unless I shutdown sabnzbd first. Is there any way around this?

I notice it doesn't have Temperature_Celsius while all my other ones do. What's weird is it shows the temp in unmenu main but not normal unraid main. UnMenu /dev/sdf scsi-SATA_WDC_WD2500AAJS 26°C 250.0G UnRaid cache WDC_WD2500AAJS-60M0A1 0°C smartctl -a -d ata /dev/sdf (cache) smartctl version 5.38 [i486-slackware-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Second Generation Serial ATA family Device Model: WDC WD2500AAJS-60M0A1 Serial Number: Firmware Version: 03.03E03 User Capacity: 250,059,350,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Jul 8 20:07:14 2010 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (5580) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 68) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 157 136 021 Pre-fail Always - 3141 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 33 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 11 10 Spin_Retry_Count 0x0033 100 253 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 27 184 Unknown_Attribute 0x0033 100 100 097 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 077 062 040 Old_age Always - 23 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 12 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 33 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Interrupted (host reset) 80% 1 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

Western Digital Caviar Blue WD2500AAJS 250GB 7200 RPM 8MB Cache I have the follow hard drive but can't seem to get it to read the current temperature on it. It shows 0 degrees. All my other hard drives work fine (2TB WDC). emhttp: disk_temperature: ATTR_Temperature_Celsius not found

I just got this card and even after disabling the onboard NIC it didn't work. I have B2 version. I tried running the lspci command but didn't work.