Zonediver

Members
 View Profile  See their activity

  • Posts

    1696

  • Joined

  • Last visited

 Content Type 

Everything posted by Zonediver

  1. Zonediver
    How old is this disk? Seagate's are known for bad quality... And this has nothing to do with unraid 👍
  2. Zonediver
    Hab ich das richtig gesehen? Das Ding kostet € 400 - € 500.- ? Hell wozu??? 🤪 Nimm ein Fractal Design Define 7 - das kostet nur ca. € 160.- und kann "bis zu" 14 Laufwerke aufnehmen. https://geizhals.at/fractal-design-define-7-black-fd-c-def7a-01-a2239761.html?hloc=de
  3. Zonediver
    Check all cables (if the SSDs are SATA) and the PowerConnector too. If the SSDs are NVMe's, check if they sit "properly" into the slot on the MB.
  4. Zonediver
    Change the PSU "and" your case! NOW! This PSU is a ticking timebomb 🤣
  5. Zonediver
    It is "supported" but not recommended.
  6. Zonediver
    AMD is not recommended... BIOS, RAM, Mainboard or other incompatibilities... it can be anything - take your pick
  7. Zonediver
    As mentioned, be carefull with this cheap Controllers. If unraid is doing "importand" things, use qualified controllers or HBAs 👍
  8. Zonediver
    My Sys does not show the drives too - thats normal 👍
  9. Zonediver
    Is this update important? I dont have problems with 6.12.9... (?)
  10. Zonediver
    Da solltest dann auf iGPU-Transcoding (HW) setzen - dazu brauchst aber den PlexPass.
  11. Zonediver
    For VM's i would use an i7-9700 or better an i9-9900 👍
  12. Zonediver
    Yes they are 👍
  13. Zonediver
    Update went smooth and without issues - Thanks a lot 😉👍
  14. Zonediver
    Is it possible to mirror the syslog to an unassigned device? Would be better then the "weak" USB-Flash... I've been wondering for years why you can't move/mirror the syslogs to an SSD... The USB drive is a very bad choice...
  15. Zonediver
    I cant recommend this cards because the cheap ones are old and used. I would use 2x TP-Link TX401 and a propper cable. This card is similar to the Asus XG-C100C what i use but with a WOL-function. The Asus 10GBit-NIC is working since Oct.2019 without issues.
  16. Zonediver
    If so, for what purpos is the switch? You can directly link both machines with additional 10GBit-NICs and done 👍
  17. Zonediver
    ...this was just a "little" joke 😉 I Know, you take care of bugs 👍👍👍
  18. Zonediver
    Where is the developer? Gone with the wind? 🤣
  19. Zonediver
    ...the last update destroyed the whole GUI of unraid... Not respondable anymore... I am not amused... Deleted this plugin and all is working again... Strange 🤔👎
  20. Zonediver
    Hmmm? 🤔 Wieso? Den kann man im BIOS auch so einstellen, dass er nur sehr wenig Energie benötigt. Mein i7 läuft mit 45W - das reicht vollkommen aus. Trotzdem hab ich 8 Kerne zur Verfügung, falls ich die mal benötige...
  21. Zonediver
    That's a normal behavior - i have this with my IPFire router since years 👍 This does not affect accessibility from outside.
  22. Zonediver
    Wie schon erwähnt... stromsparen mit "der" CPU wird nichts werden...
  23. Zonediver
    Nochwas: Asus und Gigabyte sind solche "Patienten", die gerne an allen Ecken und Enden sparen - da kommt sowas auf fast jedem Board vor 👍
  24. Zonediver
    Das solltest aber "vor "einem Neukauf klären - billige Boards sind da meist echt Schrott, weil die alles irgendwie miteinander "teilen" 🤣
  25. Zonediver
    Weil etliche Controller kein TRIMM für die SSDs unterstützen. Mein HBA kann das auch nicht - daher SSDs (wenn SATA) nur ans Mainboard anschließen 👍 Bei mir laufen allerdings keinen SATA-SSDs mehr, da zu langsam.