Trackpads

Hi, I have two unraid servers, I have mounted via SMB a share with unassigned devices but do not see it in FFS. What am I doing wrong? Thanks!

This is something that is simple in most Hypervisors but nearly impossible here. Not sure that it should be that way.

I followed the link and there is no plugin for nerdtools to show me the issue. Any ideas? executor-diagnostics-20230330-1427.zip

It was in a pool. I didnt realize that would hide the box. thanks!!

Some of my disks I can select and some look like this with the box greyed out. Any ideas? Is it just based on the device?

Will do this weekend and thanks again!!

ah ok, that trim test above was with the asmedia. I will try it with the HBA this weekend. Thanks so much!!!

So should I stick with the ASMedia or move to the HBA? Thanks!

I got this:

I thought Trim was already enabled for btfrs? These are all in pools. I hadnt thought of NVME but getting enough would require more hardware.

It was anecdotal , but I did run crystal diskmark in a vm on both and the HP was noticeably slower. A better question then maybe is what do you guys recommend instead of either? They are WD Green 1TBs. Thanks so much!!!

No one? If this is obvious then please tell me lol.

I bought the card below and was using it fine. I replaced it with an HP H240 HBA and am using it now but feel like it is slower. Both cards are connected to 6 x 1tb ssds. Which one is actually faster? Still learning and appreciate responses. The one I have now: (6x sata to 6x sata) https://www.amazon.com/gp/product/B097NKJSDC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 The HP H240 (2x sas to 6x sata) https://hwf.com.ua/content/uploads/files/quickspecs-hp-h240-smart-host-bus-adapter.pdf Thanks!

I have a Dell Precision T7610 for my primary unraid server. There is some quirk in the bios that I cannot solve. If I boot legacy then it tells me no boot drive exists. If I boot from UEFI it tells me the same but lets me continue and boots from the USB just fine. The problem is not unraid. I bricked a motherboard with some help from the dell forums and I am not taking any chances with any more attempts to solve this. It is definately the Dell BIOS but there are no new updates for that machines. How can I boot from an SSD as a test? The unraid tool only will select USB Drives. I will to put a copy of unraid on an SSD and plug it in the the MB stat ports and see if Legacy or UEFI will boot fine and not require me to touch the keyboard each time. I want this machine to run truly headless. Thanks again, -Jason

Cant get it to work and just gave up. the VMs on unraid will be ones that dont the GPU. I purchased a separate machine for video/audio processing and will use the GPU there. Just no good tutorials on here to make this work and I am too frustrated. SimonF, thanks for taking the time at least to respond, I really appreciate it.

I have to boot UEFI on the machine, Dell T7610. If I don't no boot device is found. I am going to try moving unraid to a small 120gb ssd and see if that lets me boot into legacy. Is that the issue?

I am thinking I should give up. I have searched the forum and tried everything. Interesting is that if I use VNC as the primary and the GTX as the secondary it will not give me any errors in windows device manager. But handbrake cant use it, gives an error. So probably not working still.

Tried a couple more things and added the line in the syslinux config but still no luck. The windows VM still reports Code 43. The graphics drivers install in the VM and the HD audio device says its working but that is it. executor-diagnostics-20230131-1407.zip

I have an Nvidia Titan GTX X installed in the primary GPU slot and have dumped the vbios using Spaceinvaderones video tutorial. I have bound the card and its audio to the VFIO at boot and have rebooted. The card shows up in the Windows 10 VM but it says that there was an error and stopped. I think I have done everything but as always appreciate any assistance you can give me. Thanks again. executor-diagnostics-20230131-0010.zip

I bought a very nice T7610 dual xeon and one of the PCI slots is a PCI 2.3x4. What was the purpose of this? When you really need that parallel port? Seems like a waste of space. Any ideas what I could use it for? thanks!

duh, sorry lol

I see that it was part of the distro but when I run the command I get not found. Ideas on what I have done wrong this time? Thanks!

Ok, so now I figured it out. The 4 port card doesnt show up in unraid in order. What I thought was (right to left) 5/4/3/2 is actually 5/3/4/2. Damn that is confusing. I was changing the wrong Eth settings each time for eth3. ugh lol. thanks agian for the patience!

Well that solved it then. I removed the P4 since I cant get it to work in the vm, no way to export the vbios. I ordered a Titan and will use it instead. Thanks again for the patience and help!

So.... I did that and boom it worked. So I then just swapped the configs between Eth4 and Eth5 and now they both work. Networking, its why I am crazy... Thanks again!!!!!!!