ralop

I get those speed with 80-90gb files and with 9000mtu it does go to 700-800mt/s range. Was just wondering if you had the same problem and had to change settings in unraid or card itself

Yet another question, did you have to change your mtu to 9000 from 1500 in the network settings to get correct speeds with the intel nic? For some reason my mellanox gave me around 700-800 speeds with the 1500 setting but intel only gets around 100-120?

"This plugin modifies stock system files and may cause issues with your system" So how save is this to use these days on 6.12.6 version?

Okay, Thank you for your help

So something like this should work i am guessing? dac cables

Sorry for posting in english on a german sub but i have been looking at that same intel card on ebay and i am wondering what brand cables you are using with it? Been reading that intel seems to be picky about cables used with them?

How reliable are the power consumption numbers broadcom advertises? Looking at their site 9500-16i uses almost the same amount power than my current 9207-8i

These guys have a pretty good list about different psu's efficiencies https://www.cybenetics.com/index.php?option=whats-new

Because i could not get exit node come up in the setting of the admin panel, i re-installed everything and used ibracorbs guide. Until i used the tailscale set --advertise-exit-node line it would not come up

So what causes this notification? Been trying to get tailscale to work but sometimes its fine and sometimes it starts to give that "error". Maybe that is the cause why i can not get the streaming to work on jellyfin Tailscale Health Linux DNS config not ideal. /etc/resolv.conf overwritten. See https://tailscale.com/s/dns-fight Commands i used when i installed the tailscale tailscale set --advertise-exit-node --advertise-routes=192.xxx.xx.x/xx,192.xxx.xxx.x/xx echo 'net.ipv4.ip_forward = 1' | sudo tee -a /etc/sysctl.conf echo 'net.ipv6.conf.all.forwarding = 1' | sudo tee -a /etc/sysctl.conf sudo sysctl -p /etc/sysctl.conf

So what is the difference between EDACerton`s plugin and dsmith44`s plugin?

Is there away to disable the parity disc with the new config setting without losing data on the data drives? If there is can someone write a step by step on how to. Like a n00b i run the parity before moving my files to the server and now the transfer speed are really slow because parity and i have around 80tb to transfer. Only seeing around 50-100Mt/s while transferring files

Is there people here using Intel i5-9600k on their server. How is your power comsumption and what kinda setup other hardware wise? How good is the performance transcoding 4k hdr remux content?

Is Intel res3tv360 and 9300-8i still a good working combo with unraid?

Why isn't the integrated gpu on your cpu enough for that use? assuming you still have the i3-7350k cpu

You can always check out the maps for providers https://svgshare.com/i/iG8.svg https://un.catnip.cloud/ Also https://whatsmyuse.net/

Not going to run 16 drives out of the gate just meant that hba+expander gives me option of running 16 drives in dual link. But for start will be using some of my old hard drives and slowly updating them to bigger ones.

Hi, Ive been looking to do a unraid server build. I need your guys opinions should i use my old motherboard and cpu or go the route all the cool kids go and build a 10/11/12th gen server. Server will be mostly just storing my movies/tv shows and have the automation for torrent etc. At this moment not planning to run plex or jellyfin, just straight connection between main pc and server, but if i do its only to my tv. At start one hba and sas expander (dual link) giving me 16 drives but later if needed add second hba and expander and also run a 10gbit nic. My old computer has asus tuf z370 pro gaming mb and intel i3-8300 cpu Edit1 So the question is do you guys see a problem using the old cpu for all the *arr usenet/torrent downloads Watching movies shows on main computer with mpc-hc+madvr or just go straight to the newer hardware