darber

yeah I have done both

I have that enabled and I also have write log to usb enabled, sorry I thought it was included in diagnostics. syslog-Tower.log

Hi my system seems to be crashing, I wonder if anyone can see anything in my logs (I cant) or can advise me how to troubleshoot this? I have my server set to auto power-on but not auto-start the array. I usually find out there has been a problem when Plex isnt working. I then tailscale to the box (if im out) and start the array. This will tell me there has been an unclean shutdown and start a parity check. Last time this happened I found out at around 12:00 on the 29/08, looking at the logs I cant see anything after app/plugin auto-update completed at 04:30. Thanks for any help. tower-diagnostics-20250830-1741.zip

Sorry for not being clear. The original issue was: I rebooted my router to trouble-shoot a broadband issue with my ISP. After I had finished speaking with my ISP (and router was back online etc) I noticed that all of my docker hosted services were not running. I logged in to unraid to see what was up and saw my array was not running. I started the array and received the message that an unclean shutdown was detected and a parity check would start. I am not sure what triggered this unclean shutdown, my unraid host is plugged into a ups, im assuming this is due somehow to the network outage I caused? To complicate things (sorry) once I started the array all of my docker services came back up except one (Adguard home) this happens sometimes and a reboot sorts it, at this point I did perform a clean reboot to fix that different issue im aware of which is why when you asked me to check my uptime it wouldnt be very long. I hope that helps a bit.

Maybe if I upload the previous syslog that might help you? There was no power interruption I'm aware of.

Damn. I have manually restarted after I posted this to fix a docker container that wasn't working. Does that part of the syslog imply a reboot did happen then?

Yeah this is what I thought. There was no shutdown at all, the system is even on a UPS. All that happened was I powered off the router and pulled the power in the modem.

Hi I have had some issues with my broadband recently and my ISP has had me turn off my router/modem to troubleshoot. Sometimes this has caused me to have to start my array again (I do not have autostart enabled). After starting an unclean shutdown is detected and a parity check starts. I wouldnt expect this to happe from network loss is that right? tower-diagnostics-20250416-1527.zip

Hi, is there anythng in here?tower-syslog-previous-20250227-0904.zip

My server keeps crashing and im not sure why, can anyone see anything in my logs? Sometimes its available by ssh but sometimes not. I thought it was due to failures on a disk in my cache pool so I have just moved my shares from cache to array. tower-diagnostics-20250224-1235.zip

I was following this guide: https://unraid.net/blog/unraid-valheim-dedicated-server Which is why I set the network to br0 but this didnt work and was just stuck in a loop where it would error sayng SteamCMD not installed. I have now set the network to bridge and its all working fine.

I fixed it. I read somewhere the network had to be set to br0 but that didnt work, when I set it back to bridge it worked fine. Thanks for getting back to me.

Is the Valheim docker still working? SteamCMD is not installing for me and I cant see anyone else reporting th same issue.

issue reoccurred after 1st reboot, rebooted again and seems to be stable now.

Thanks that diag log was from yesterday evening. I took the log and rebooted and it resolved the issue. This morning I woke up and it seemed to have reoccurred. Ive attached a log from just now, can you confirm its the same issue? Ill reboot again. tower-diagnostics-20240925-1129.zip