ricostuart

Just tested and yes test does work, but not add.

I was wondering if it is possible to create home directories for each user when creating them? It was a feature that was used heavily on my QNAP device, but as that software literally took 30-45mins for reboot sequence, I had to just put it back onto Unraid (also Unraid uses so much less resources!). I have created a share directory called home_dirs on my SSDs (which is my pool device) and left that public and exported but hidden. Under samba extra config I created: [homes] comment = Home Directories valid users = %U browseable = yes writable = yes create mask = 0700 directory mask = 0700 path = /mnt/user/home_dirs/%U vfs objects = catia, fruit, streams_xattr case sensitive = auto preserve case = yes short preserve case = yes But this seems not to be working. I created the folders manually, chmod 700 each of them and chown each folder as needed. What am I missing?

I've tried editing that but it will not stick. I tried with the plugin disabled, enabled, etc etc but each time it reverts back to 20x2. Same for when the system reboots, etc.

already tried via the contact page, but got no response. been quite a number of weeks too..... I'll try again.

Hi. I had to transfer my usb key from a very old one to a newer one but I'm still getting boot issues with it. I've tried contacting support via the website as it says I cannot transfer again to another key. Can any one help? I've also wondered - is there a way of disabiling the legacy boot option on the key and have it only showing UEFI? The reason being is that the system (a QNAP NAS) wont boot from the key if the legacy boot is selected on boot devices. It works fine if UEFI selected. I can get into the bios and change the default boot order to make it goto UEFI as default (no way of disabling legacy in the bios) but if for any reason the key comes out and reinserted then the bios will rechange the priorities and have the legacy as 1 and uefi as 2. Its a pain.

Has anyone figured out a way of changing the display settings? Its currently at 20x2 but i need to change it to 16x2

So after much testing, i figured it out! Thankfully that driver addon helped me out by showing how to blacklist a kernel driver. So, it seems my 4 main network ports are actually intel based. Now the realtek one (which has no serial showing when using lspci -vv) I have no idea what that is! There isnt a sneaky 5th network port! I do wonder if its got something to do with the front usb micro-b port? Thinking about it I believe it must as i think its ment to have direct link connection with a laptop, etc. Not somehting I've ever done...... Anyway, so I uninstalled the realtek addon, and under the system drivers I blacklisted the realtek driver. And its now showing as 4 ethernet ports correctly! Thank you!

I've instaled the drivers (thanks for that!) and I've rebooted, but still the mac isnt right? server-diagnostics-20230929-1422.zip

I've got my unraid server running balance-alb (6) as it has 4 integrated network ports. Its a QNAP device, so its not using an addon network card. eth 1 - eth 4 have correct sequential MAC showing, however the bonded address keeps changing to something random each reboot. EG: qnap MAC: 24:5E:BE:23:8F:00, 24:5E:BE:23:8E:FF, 24:5E:BE:23:8F:01, 24:5E:BE:23:8F:02. The MAC currently being used is : 66:59:F1:DF:48:F7 showing on eth1 (for some reason). eth0 is showing on unraid as 24:5E:BE:23:8F:02. After a reboot and plugging in all 4 connections, its now using mac : 82:72:39:55:CF:C5 Is there a way of getting Unraid to just use one mac and stick with it? I know i can do static ip on unraid which will solve alot of problems, but I'd prefer to set static ip via my router so its easier for me to adjust things such as my dns, etc. Thanks server-diagnostics-20230929-1325.zip

is there any way of editing the settings of the screen display? Mine has all the data a few spaces to the right meaning a lot of stuff is cut off. Its only a 2 line display...

Totally makes sense. And thankful that you do! Thanks for checking.

Hi guys, So ive got a 1050ti installed in my server which is working great. However, nvidia-smi wont detect power draw. From what i can find out, this is due to nvidia not putting the support in for older cards in the linux firmware. The card itself does support this feature. I found a github that may fix this issue but wanted someone with a better understanding to see if this may be used on unraid. https://github.com/CFSworks/nvml_fix

Unraid did an update last night and now the qnap-ec drivers were removed and cant be reinstalled. I am getting this error - plugin: run failed: '/bin/bash' returned 1 Can anyone help? This has stopped my fans from being controlled causing my drives to get a bit warm......

Is there a way to customese LCDd.conf without it resetting to defaults? It seems the QNAP driver has the screen size wrong - shold be 16x2 but the options (eg. uptime) show passed the edge of the screen. Also would like to configure other options such as screen brightness, timeout, etc. Sent from my SM-X700 using Tapatalk

So I gave up waiting and upgraded to RC5 and have the QNAP LCD working!! So happy! Sent from my SM-X700 using Tapatalk