wolferl99

Interestingly the exact same thing happened to me. And thanks, your tip 'remove image, move nzbget appdata. reinstall image, copy back nzbget.conf and python.sh' worked for me too. not sure but it must be related to python2 install during the image install. still looking for a fix

thanks for the info. the TS431S comes with an expander, thats why I need SAS-SAS between it and my case. even if I put all drives into a new case, I still need new adapter cards though (2 X8 ones as x16 ones dont seem to be around much), so it really comes down to new case vs ext drive case.

something like that for the external SAS connection and this for the internal connections?

Hi, as my trusted Asrock E3C224D4I-14S MoBo died, I had to replace it. Went with a Asrock E3C246D4U (CPU Intel Xeon E-2124). I have 12 drives in a Fractal Design Node 804 case, 8 in the internal cages plus 4 in an additional cage in the front. Two problems with the 246 board: a) it doesnt have the 2 onboard mini SAS connections and b) because the CPU is in the different place I can no longer place the additional drive cage in the case. For the time being I am using a AOC-SASLP-MV8 to at least keep the system up albeit slowly. My plan is to get a Silverstone TS431S put the 4 drives in and connect via SAS. Thankfully the new board has 3 PCI E slots x4, x8, x16 (currently running the MV8 in the X4 slot). As the MV8 doesnt really have the bandwith (or better the X4 aspect) to run 4 modern drives at speed, I no longer want to use that. Having the x16 slot seemed like the best option. get a x16 card with 1 external and 2 internal SAS connection, problem solved. But, these either dont exist or only it very fancy versions with way more ports for way more money. Having the luxury of multiple PCIE slots my plan now is: 1. get one x8 card with 2 internal SAS connections (run in x16 slot) 2. get another x8 card with 1 external SAS connection (run in x8 slot) 3. make sure these are HBA not RAID cards (is that as simple as finding a card that doesnt have RAID in the name?) Would like feedback. silly idea? should work? any advice on cards to get? (I am aware of the 8087/8088 cable situation)

After enjoying the free version for a while, I bought my first licenses 2010: " ============================================================= Lime Technology, LLC - Online Order ============================================================= Invoice No.: 2327 Order No.: 110628526 Date: 06/16/2010 " IIRC 4.7 was my first version, but I could be mistaken. Apart from some smaller hickups, mostly related to hardware (ECC vs non ECC memory comes to mind), things have gone pretty smoothly. I still can't believe how smooth and integrated everything is today, vs the old UnMenu days, loading packages in the go file Ha, even found one of my early status emails: " To: root Subject: unRaid Status OK Sent: Jun 22, 2010 6:47 AM Subject:unRaid Status OK Status update for unRAID Tower - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Status: unRaid is OK Server Name: Tower Server IP: 192.168.1.103 Date: Tue Jun 22 06:47:01 GMT+7 2010 Filesystem 1K-blocks Used Available Use% Mounted on /dev/sdf1 3912180 190948 3721232 5% /boot /dev/sde1 312557836 1082464 311475372 1% /mnt/cache /dev/md4 195353928 32840 195321088 1% /mnt/disk4 /dev/md2 1953454928 1378414864 575040064 71% /mnt/disk2 /dev/md3 1953454928 247557880 1705897048 13% /mnt/disk3 /dev/md1 1953454928 1471779012 481675916 76% /mnt/disk1 shfs 6368276548 3098867060 3269409488 49% /mnt/user shfs 6055718712 3097784596 2957934116 52% /mnt/user0 " So a whopping 6TB in /mnt/user? Today any of my disks is larger than this!

Hi, following situation. I ran a preclear on a drive over the weekend and I assume it finished sometime last night. This morning we had an extended power outage and the server shutdown and then restarted a couple of hours later. I can't seem to find the preclear reports. It looks like the drive was cleared, as I see this, when I run a preclear -t on it: Pre-Clear unRAID Disk /dev/sdl ################################################################## 1.15 Device Model: ST8000AS0002-1NA17Z Serial Number: Z840DXXX LU WWN Device Id: 5 000c50 087d2caac Firmware Version: AR15 User Capacity: 8,001,563,222,016 bytes [8.00 TB] Disk /dev/sdl: 8001.6 GB, 8001563222016 bytes 255 heads, 63 sectors/track, 972801 cylinders, total 15628053168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdl1 1 4294967295 2147483647+ 0 Empty Partition 1 does not start on physical sector boundary. ######################################################################## ========================================================================1.15 == == DISK /dev/sdl IS PRECLEARED with a GPT Protective MBR == ============================================================================ I ran the preclear script via the gui plugin. I checked /boot/preclear_reports/ but there are no new reports. The last one is from November, the last time I ran a preclear. Am I missing something? Are the logs somewhere else? Should I assume that there were no major problems, when the drive is marked precleared? Here's the current smart report. (running an extended smart report right now) root@tower:/boot# smartctl -a /dev/sdl smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.1.18-unRAID] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: ST8000AS0002-1NA17Z Serial Number: Z840DXXX LU WWN Device Id: 5 000c50 087d2caac Firmware Version: AR15 User Capacity: 8,001,563,222,016 bytes [8.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5980 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Mar 7 17:22:16 2016 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 249) Self-test routine in progress... 90% of test remaining. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 951) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x30a5) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 114 099 006 Pre-fail Always - 81402960 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 2 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 071 060 030 Pre-fail Always - 12772681 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 49 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 2 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 65537 189 High_Fly_Writes 0x003a 098 098 000 Old_age Always - 2 190 Airflow_Temperature_Cel 0x0022 063 060 045 Old_age Always - 37 (Min/Max 18/37) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 2 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 12 194 Temperature_Celsius 0x0022 037 040 000 Old_age Always - 37 (0 18 0 0 0) 195 Hardware_ECC_Recovered 0x001a 114 099 000 Old_age Always - 81402960 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 69879117905966 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 15628053208 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 17547198660 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Self-test routine in progress 90% 49 - # 2 Short offline Completed without error 00% 48 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. root@tower:/boot#

FYI: nzbget after updating the container works fine again here. Thanks gfjardim

Ok, I looked into it a bit and found what my problem was. In my nzbget.conf file, that sits on my cache drive and is 'volume mapped' into the docker container, I had to change two line items: From WebDir=/usr/share/nzbget/webui To WebDir=/opt/nzbget/webui And From ConfigTemplate=/usr/local/share/nzbget/nzbget.conf To ConfigTemplate=/opt/nzbget/webui/nzbget.conf Looks like the nzbget location changed from /usr/local/share/nzbget to /opt/nzbget. At least that's my deduction based on the config file. Oh, and I think I manually copied over my cached nzbget.conf file into the docker /opt/nzbget/webui/ directory. without that, the gui worked but I couldn't changed settings. I used docker exec -i -t NZBGet bash for that. Not sure why that happened, I'm not the biggest docker expert in the world. But, this works for me. Oh, dont forget to manually stop and start the docker image via unraid webgui

same 404 here. looking at the changes, it seems he moved stuff from install.sh to config.sh but commented out these lines: +# # Fix a potential lack of template config +# if [[ -f /usr/share/nzbget/nzbget.conf ]]; then +# cp /usr/share/nzbget/nzbget.conf /usr/share/nzbget/webui/ +# elif [[ -f /usr/share/nzbget/webui/nzbget.conf ]]; then +# cp /usr/share/nzbget/webui/nzbget.conf /usr/share/nzbget/ +# fi not sure why he moved it but commented it out. could be an easy fix.

Seeing the way LT communicates with its users (see announcement thread for rc1 2 3, might be 4 by the time I'm done), I really don't feel like either testing nor providing feedback. I know, doesn't add to the conversation but it might be important to understand why people chose not to participate. I'll be happily using the final version once it's out for 2 weeks without problems.

Very nice! And yall just remember that it will take some time to compile the new version, depending on the CPU/memory available (~ 10min here). If you don't, you might waste time troubleshooting for no reason ...

Same price in Los Angeles for another 2 days.

great thread, thanks everyone. One slight addition: it might make sense to lock rsync down a bit for security reasons. If you want/need to, simply add a hosts allow statement to your rsync.conf file, e.g [mnt] path = /mnt comment = /mnt files read only = FALSE hosts allow = 192.168.0.100 only allowing 192.168.0.100 to rsync to this box.

Hear ya. That's why I bought in 3 different batches from 3 different vendors in 3 different states over, you guessed it, a 3 week time frame. It's still the same drive model, that's a risk I'm willing to take. smaller footprint was a main driver, so going with a bunch of smaller drives simply wouldn't have been practical as this will replace my main box and I need the space. I'll spend a lot of time, automating smart reports so at least drive failures don't come out of the blue. In 4 years I'll build a new box with 2 16TB drives before my 6TB ones fail!

That's pretty much what I did. I bought 7x 4TB drives a year ago, replacing a huge pile o'drives. Selling my old drives on Fleabay, I got close to the then-current per-TB price fir them. same here. just replaced a 11 drive 2TB/4TB server with a nice clean 6x6TB setup. I know if I had waited another few months, the drives would have been cheaper/larger etc pp. That will always be the case as there is always technical improvements. Gotta find the right compromise for you. I like the confidence of having a brand new system that should run for a few years easily (my old box ran for four years with very little problems). But again, it has to be right for you. For some people lowest price is the highest priority, for others most space.

Yeah, once you know it, it's very simple!

Hi, thanks for the update. Yeah, the memory was a pita. I tried the following: - http://www.newegg.com/Product/Product.aspx?Item=N82E16820148545&cm_re=BLS2KIT8G3D1609DS1-_-20-148-545-_-Product MEM 8Gx2|CRUCIAL BLS2KIT8G3D1609DS1 - http://www.newegg.com/Product/Product.aspx?Item=N82E16820148802 Crucial 16GB (2 x 8GB) 240-Pin DDR3 SDRAM ECC Registered DDR3 1600 (PC3 12800) Server Memory Model CT2K8G3ERSLD4160B - http://www.newegg.com/Product/Product.aspx?Item=N82E16820239291&cm_re=KVR16N11K2-_-20-239-291-_-Product MEM 8Gx2|KST KVR16N11K2/16 R None of which worked! Either 4 beeps or one single beep. The last Kingston one was actually on the Kingston website as recommended for the board, but alas did not work either! Only this crucial memory: CT5550279 CT2KIT102472BA186D.000 16GB UPGRADE FOR A ASROCK E3C224D4I-14S SYSTEM , that I could ONLY get at the crucial online store (and which of course was on backorder for a week ) worked in the end! VERY picky board.

Two more WD60EFRX data points preclear_report_sdg ========================================================================1.15 == invoked as: ./preclear_disk.sh /dev/sdg == WDCWD60EFRX-68MYMN1 WD-WXCxxxxxxx33 == Disk /dev/sdg has been successfully precleared == with a starting sector of 1 == Ran 1 cycle == == Using :Read block size = 1000448 Bytes == Last Cycle's Pre Read Time : 15:15:10 (109 MB/s) == Last Cycle's Zeroing time : 12:28:00 (133 MB/s) == Last Cycle's Post Read Time : 27:52:22 (59 MB/s) == Last Cycle's Total Time : 55:36:32 == == Total Elapsed Time 55:36:32 == == Disk Start Temperature: 35C == == Current Disk Temperature: 39C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdg /tmp/smart_finish_sdg ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Temperature_Celsius = 113 117 0 ok 39 No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 0 sectors had been re-allocated before the start of the preclear. 0 sectors are re-allocated at the end of the preclear, the number of sectors re-allocated did not change. ============================================================================ # cat preclear_report_sdh ========================================================================1.15 == invoked as: ./preclear_disk.sh /dev/sdh == WDCWD60EFRX-68MYMN1 WD-WX2xxxxxx73 == Disk /dev/sdh has been successfully precleared == with a starting sector of 1 == Ran 1 cycle == == Using :Read block size = 1000448 Bytes == Last Cycle's Pre Read Time : 14:57:55 (111 MB/s) == Last Cycle's Zeroing time : 12:10:29 (136 MB/s) == Last Cycle's Post Read Time : 27:19:53 (60 MB/s) == Last Cycle's Total Time : 54:29:16 == == Total Elapsed Time 54:29:16 == == Disk Start Temperature: 35C == == Current Disk Temperature: 39C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdh /tmp/smart_finish_sdh ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Temperature_Celsius = 113 117 0 ok 39 No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 0 sectors had been re-allocated before the start of the preclear. 0 sectors are re-allocated at the end of the preclear, the number of sectors re-allocated did not change. ============================================================================ cat smart_finish_sdg Disk: /dev/sdg smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.3-unRAID] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD60EFRX-68MYMN1 Serial Number: WD-WXCxxxxxxx33 LU WWN Device Id: 5 0014ee 260398076 Firmware Version: 82.00A82 User Capacity: 6,001,175,126,016 bytes [6.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5700 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Oct 9 22:21:00 2014 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 5384) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 707) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 100 253 021 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 55 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 0 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2 194 Temperature_Celsius 0x0022 113 108 000 Old_age Always - 39 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. # cat smart_finish_sdh Disk: /dev/sdh smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.3-unRAID] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD60EFRX-68MYMN1 Serial Number: WD-WX2xxxxxxx73 LU WWN Device Id: 5 0014ee 2b58f5391 Firmware Version: 82.00A82 User Capacity: 6,001,175,126,016 bytes [6.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5700 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Oct 9 21:14:13 2014 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 3824) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 692) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 100 253 021 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 54 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 0 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2 194 Temperature_Celsius 0x0022 113 107 000 Old_age Always - 39 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

Nothing too spectacular, but I wanted to provide the results of one of of my 6TB WD Reds preclear as another datapoint. I have 3 more reports of the same model, but they are a bit off because I adjusted the timezone halfway through the process. But the times were very comparable to this one: ========================================================================1.15 == invoked as: ./preclear_disk.sh /dev/sdg == WDCWD60EFRX-68MYMN1 WD-WX11D7 == Disk /dev/sdg has been successfully precleared == with a starting sector of 1 == Ran 1 cycle == == Using :Read block size = 1000448 Bytes == Last Cycle's Pre Read Time : 15:19:46 (108 MB/s) == Last Cycle's Zeroing time : 12:44:48 (130 MB/s) == Last Cycle's Post Read Time : 28:27:21 (58 MB/s) == Last Cycle's Total Time : 56:32:54 == == Total Elapsed Time 56:32:54 == == Disk Start Temperature: 27C == == Current Disk Temperature: 36C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdg /tmp/smart_finish_sdg ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Temperature_Celsius = 116 125 0 ok 36 No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 0 sectors had been re-allocated before the start of the preclear. 0 sectors are re-allocated at the end of the preclear, the number of sectors re-allocated did not change. ============================================================================ Disk: /dev/sdg smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.3-unRAID] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD60EFRX-68MYMN1 Serial Number: WD-WX11D7 LU WWN Device Id: 5 0014ee Firmware Version: 82.00A82 User Capacity: 6,001,175,126,016 bytes [6.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5700 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Oct 3 20:46:07 2014 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7184) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 725) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 100 253 021 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 1 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 56 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 0 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 0 194 Temperature_Celsius 0x0022 116 115 000 Old_age Always - 36 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Actually now that I'm looking at it, I'm surprised that the POWER_ON_HOURS change isn't reported in the report. Does the script ignore that now?

Did you use ECC memory Reginald? Just got the same case/board and it wont start at all with my non ECC memory. As the case doesn't have a speaker, I dont know if it sends emergency beeps, but it simply does not output a picture via VGA.

looking good. any chance to use hotswap cages with this case?

That looks exactly like it for me when I went from 5 to 5.03. In my case there was a segfault for libc used by wget in the syslog. never fixed it and downgraded to 5.

john, you seem to have the same problem I just experienced after upgrading to 5.03 from 5.0. a segfault in libc when running wget. that causes the startup/install to fail and not download the latest and greatest. because of that other plugins (like sabnzdb) didnt start either. I didnt have the segfault with 5.0. Unfortunately I wasn't able to fix it. there must be some plugin conflict, but I didnt have the time to investigate after 20 minutes and downgraded back to 5.0. all good now, vbox working fine. just thought I'd share.

Hi All, just precleared a new seagate 4TB and wanted a second set of eyes on the report. root@Tower:/boot/preclear_reports# cat preclear_rpt_Z30066L1_2013-12-03 ========================================================================1.14 == invoked as: ./preclear_disk.sh -A /dev/sdf == ST4000VN000-1H4168 Z30066L1 == Disk /dev/sdf has been successfully precleared == with a starting sector of 1 == Ran 1 cycle == == Using :Read block size = 8388608 Bytes == Last Cycle's Pre Read Time : 9:25:43 (117 MB/s) == Last Cycle's Zeroing time : 8:08:29 (136 MB/s) == Last Cycle's Post Read Time : 20:21:54 (54 MB/s) == Last Cycle's Total Time : 37:57:06 == == Total Elapsed Time 37:57:06 == == Disk Start Temperature: 35C == == Current Disk Temperature: 27C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdf /tmp/smart_finish_sdf ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Raw_Read_Error_Rate = 117 113 6 ok 157046680 Spin_Retry_Count = 100 100 97 near_thresh 0 End-to-End_Error = 100 100 99 near_thresh 0 High_Fly_Writes = 72 100 0 ok 28 Airflow_Temperature_Cel = 73 65 45 ok 27 Temperature_Celsius = 27 35 0 ok 27 No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 0 sectors had been re-allocated before the start of the preclear. 0 sectors are re-allocated at the end of the preclear, the number of sectors re-allocated did not change. ============================================================================ root@Tower:/boot/preclear_reports# ================================================================== 1.14 = unRAID server Pre-Clear disk /dev/sdf = cycle 1 of 1, partition start on sector 1 = Disk Pre-Clear-Read completed DONE = Step 1 of 10 - Copying zeros to first 2048k bytes DONE = Step 2 of 10 - Copying zeros to remainder of disk to clear it DONE = Step 3 of 10 - Disk is now cleared from MBR onward. DONE = Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4 DONE = Step 5 of 10 - Clearing MBR code area DONE = Step 6 of 10 - Setting MBR signature bytes DONE = Step 7 of 10 - Setting partition 1 to precleared state DONE = Step 8 of 10 - Notifying kernel we changed the partitioning DONE = Step 9 of 10 - Creating the /dev/disk/by* entries DONE = Step 10 of 10 - Verifying if the MBR is cleared. DONE = Disk Post-Clear-Read completed DONE Disk Temperature: 27C, Elapsed Time: 37:57:06 ========================================================================1.14 == ST4000VN000-1H4168 Z30066L1 == Disk /dev/sdf has been successfully precleared == with a starting sector of 1 ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdf /tmp/smart_finish_sdf ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Raw_Read_Error_Rate = 117 113 6 ok 157046680 Spin_Retry_Count = 100 100 97 near_thresh 0 End-to-End_Error = 100 100 99 near_thresh 0 High_Fly_Writes = 72 100 0 ok 28 Airflow_Temperature_Cel = 73 65 45 ok 27 Temperature_Celsius = 27 35 0 ok 27 No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 0 sectors had been re-allocated before the start of the preclear. 0 sectors are re-allocated at the end of the preclear, the number of sectors re-allocated did not change. root@Tower:/boot# === START OF INFORMATION SECTION === Device Model: ST4000VN000-1H4168 Serial Number: Z30066L1 Firmware Version: SC43 User Capacity: 4,000,787,030,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 9 ATA Standard is: Not recognized. Minor revision code: 0x001f Local Time is: Tue Dec 3 07:50:41 2013 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 107) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x10bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 117 100 006 Pre-fail Always - 157084784 3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 1 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always - 450558 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 40 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 1 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 072 072 000 Old_age Always - 28 190 Airflow_Temperature_Cel 0x0022 074 050 045 Old_age Always - 26 (Min/Max 25/36) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1 194 Temperature_Celsius 0x0022 026 050 000 Old_age Always - 26 (0 25 0 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 40 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. I think it looks great overall, the only two values I'm not too sure about are Raw_Read_Error_Rate & High_Fly_Writes. Anything you guys see you wouldn't like?

Just remember that your license key is tied to your thumb drive. You will need a new key for a replacement drive. Unless you only use the free version of course.