hsingh314

Just tried - same issue.

- Removed GPU Top - Blacklisted the i915 driver (just did the echo command thing in the link you sent). - Installed 6.12.10 (only one it would let me). - No webgui - tried /etc/rc.d/rc.nginx-fpm restart & /etc/rc.d/rc.php-fpm restart - Login screen showed up - logged in - blank screen - did diagnostic command through ssh - no array, dockers or vm's will start up. - downgraded back to 6.11.5 I have attached the diagnostic thing from when it was "running" 6.12.10 - I am not sure what to do about the update tower-diagnostics-20240407-1448.zip

Should I also remove Intel GPU Top?

Here is the diag for the current v6.11.5 I am still running. bishop-diagnostics-20240403-1331.zip

Apologies, it kinda hectic. - Ran update assistant (everything said ok) - installed 6.12.8 - no web ui or array working - ran diagnostic but could not get the results through SSH (would crash every time) - downgraded to 6.11.5 - able to get diagnostics (the one posted, from 6.12.8) - array spins up - no VMs work - restart system - All VMs gone, all plug-ins gone, all dockers gone - Communtiy Apps will not install because Unraid is too old - Remake VM and gives error: qemu-system-x86_64: terminating on signal 15 from pid 18676 (/usr/sbin/libvirtd) 2024-03-23 23:57:39.580+0000: shutting down, reason=shutdown - Run update assistant ( everything ok) - install 6.12.8 - same issue, no web ui no array - downgrade back to 6.11.5 - ui and array back. VMs gone - remake VM and gives error : qemu-system-x86_64: terminating on signal 15 from pid 18676 (/usr/sbin/libvirtd) 2024-03-23 23:57:39.580+0000: shutting down, reason=shutdown - that’s all I’ve done so far (besides questioning my life decisions).

I tried recreating the VM and no matter I do I get this error: qemu-system-x86_64: terminating on signal 15 from pid 18676 (/usr/sbin/libvirtd) 2024-03-23 23:57:39.580+0000: shutting down, reason=shutdown

So I had to install 6.11.5 just to be able to get the diagnostics zip file. Unfortunately it seems like alot is gone (can't even install Community Applications plugin to get apps). Also all my VM's are gone. tower-diagnostics-20240323-1901.zip

I tried to downgrade to 6.11.5 which broke everything. Dockers, passthrough, VM's disappeared. So I tried to update back to 6.12.8 .... I am extremely regretting upgrading from 6.12.6 to 6.12.8 and it will not let me downgrade to 6.12.6. I still cannot get ssh to download the diagnostics file. Nothing is working and now I am worried that all my data might have been lost just by pushing the button to upgrade.

Safe mode did the same thing - trying to figure out the diagnostics. I see it on the server through ssh cli - but don't know how to get it on my computer.

Hi, I updated to 6.12.8 (as from I read it was ok to update, but maybe I didn't read enough). I cannot access the webui. I cannot access the array and have no way to get the diagnostic zip file. I did do the suggested solution here: But to no avail. I am not sure what to do. Was working fine for 90+ days without a reboot straight before this update. Any suggestions?

Could having PCIe ACS override set to enabled cause this issue?

Hi, I keep getting my VM crashing and it goes into a 'pause' mode. I checked the logs and keep getting the same error. I think it has something to do with my GPU as the ID of the error corresponds to the GPU I am passing through (Tesla P4). Has anyone else encounter this before? Any suggestions on what to do next? 2023-08-05T22:35:43.826885Z qemu-system-x86_64: vfio_err_notifier_handler(0000:09:00.0) Unrecoverable error detected. Please collect any data possible and then kill the guest Thanks!

Thats fair.

Welp! that sucks. Maybe it's worth indicating that in the documentation as it says that all xeon E3 v6 cpus would work, but I believe all the v6's has this gpu. Well... onwards and upwards... I'll try to figure something else out. Thanks!

I tried using this to passthrough my Intel iGPU to my VM while still being able to use it for a container. However, when I opened it, it said my system wasn't compatible even though my CPU is a E3-1245v6. The dialogue said I should download my diagnostics (attached) and post here..... so here I am.... I tried using this to passthrough my Intel iGPU to my VM while still being able to use it for a container. However, when I opened it, it said my system wasn't compatible even though my CPU is a E3-1245v6. The dialogue said I should download my diagnostics (attached) and post here..... so here I am.... bishop-diagnostics-20230804-1824.zip

Ok, I figured it out. I just typed in exactly what you had, not realizing that was the output of the .conf file & I had to edit the .conf file to have those parameters (lol - I am dumb). I got it work, or at least Unraid to detect the card. Thanks!

Ugh - I am not sure what I am doing wrong. Also I do have intel gpu top installed but the a380 doesn't show up there either.

So I updated to 6.12 (yay) - but the driver still doesn't see the a380? Is there something else I need to do. I've seen people mention 'probing' but I am not sure how to do that.

Cool, I'll wait. Thank you.

Is it safe to, or should I wait for the stable version to be released?

I am running 6.11.5. I am aware about 6.12, but my understanding its not in the 'stable' category (which I am not sure if that matters, but this is my first time doing something like this). I have attached the output from 'dmesg | grep i915' and I have no idea what any of this means. I understand that I might not be able to use the intel arc gpu until I update the OS (which I will when its stable), but is there a way that I can reduce its power consumption, instead of it idling at 100%?

My server is idling at 130W with all the drives spun up, it dips to 80W, but that still seems high. I suspect my Intel A380 is running at 100% even though it doesn't show up on the GPU Statistics, but does show up in System Devices & in Powertop. I understand that there aren't drivers for Intel Arc Gpus at this moment, but if I cannot use it, is there a way that I can make it use less power (short of pulling the card, which isn't possible right now)?

Oh - it looks like I was using Memtest 86+, its the newest version, but maybe the wrong one and will try Memtest86

Oh damn, thank you for this heads up, I will go look for that right now and try it out (or at least its good to have if I do ever solve this). Thanks. Ok, that makes sense, my bad in misunderstanding. Yea, I am hoping thats not the case, but if it is, I was looking around and thinking maybe 32gb might be good enough for my purposes for unraid. I think I am worried that maybe the bent pins might cause instabilities in the short-term or long term.

I just ordered some precision tweezers off amazon, so hoping this is the solution but very nervous I am going to break the pin I am trying to fix (or drop something while trying to fix it and it somehow breaks all 1151 pins instantly). I looked up the LTT video on fixing pins, but if you or anyone else has any tips/tricks/guidance for fixing pins, i'd really appreciate it.