Teffi71

Members
  • Posts

    27
  • Joined

  • Last visited

Teffi71's Achievements

Noob

Noob (1/14)

0

Reputation

  1. Any clue why Plex Streams shows the one stream twice?
  2. Once the server freezes up again, I will try to replug the disks accordingly! I will also remove the two extra SSDs. Then I should be fine with the total SATA slots until the new controller arrives. I ordered: Broadcom LSI 9300-16i SATA / SAS HBA Controller RAID 12Gbps PCIe x8 Avago IT FW Refurbished 4 x miniSAS auf 4x SATA Kabel SFF-8087 0,5m shall arrive after Easter, I guess ... I ordered it from here https://www.its-haehnlein.com/Shop/ Thanks again for your quick support!
  3. Thanks @JorgeB! The card I bought uses - of cause - Marvell ASM1064 and JMB575! https://www.amazon.de/gp/product/B09Z2C4LL4/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1 While I am now looking for another card, can I still use the four sata on the top of the card?
  4. Last weekend, I had a power loss to my Unraid server HAL. Once power was back, I restarted the server and noticed that the parity-check is in progress. Later that day, I couldn't reach the server anymore thru the WebGUI. Local comand line was also not responsive. Hence, I powered down the server by holding the power button and started it again. Since then, Unraid froze two more time while parity-check was in progress. I am now in my fourth attempt in finishing parity-check being at 49% done with 713 errors fixed. Today, I opened the system log while parity-check is in progress and I found that ata9 and ata10 seem to have difficulties (see log file attached). I then tried to figure out which drive these two would be and I found that ata9 directs to sdh, sdi, and sdi1 and ata10 to sdk1 & sdl1. Can this be correct? Few weeks prior to the power loss, I added a PCI SATA controller card for ten additional disks. Everything looked good prior to the power loss (but I did not look so closely then compared to now). Attached it the diagnostic file and a copy of the system log while parity-check is still in progress. Can you help? hal.local logs.txt hal-diagnostics-20240326-1605.zip
  5. Hello community, I currently have two Unraid server which I want to merge on a new hardware system. System One: runs on VM I want to move to the new system: the array I will not move to the new system: System Two: This system is my media server with Plex and music, movies and tv shows. From system two, I want to move the array and the USB stick with the license to the new system. I read several posts in this forum and I am unsure which way is the best for me. In one post, I read that I can "simply" unplug the array of system two (e.g. all hard disks when powered off & disabling any vm & dockers) and plug them into the new system and then boot up the new system with the USB stick from system two. Once the new system is booted up, I will need to specific cache and docker/VM location on new NVMEs of the new system. Once that is done, I can copy the Ubuntu VM (stopping VM and not auto boot, modify script on the new system) from system one to the new system. Is this feasible? Do I miss something? If not, then this would be my preferred approach. In another post I read that I would need to use a trial license for the new system. Setup the new system as needed. And then copy content from system two's array to the new system's array over network. As I have some several TB of content, I would rather not need to copy it over to new system. It would also mean that the new system would require additional new HDDs which I rather not buy now. So - which approach is the best way for me merging two old UNRAID server on a new UNRAID server? Approach One or Two? TIA!
  6. I am using AMC on a cloud server and there I run the different db's for movies and tv shows. Therefore, I really need to replicate the settings as otherwise I will get a lot of duplicates as folder names will diver ...
  7. I will give it another try with the AMC Options variable ...
  8. Well - it did not work ... I added the variable [amc ] Changes detected in input folder. [supervisor ] all services started. [amc ] Waiting 10 seconds before proceeding... [amc ] Invoking AMC script... [amc ] Run script [fn:amc] at [Sun Dec 10 09:37:22 CET 2023] [amc ] [PSA] Important Discussion of Changes effective as of 28 Apr 2023: [amc ] https://www.filebot.net/forums/viewtopic.php?t=13406 [amc ] Parameter: artwork = n [amc ] Parameter: music = n [amc ] Parameter: clean = y [amc ] Parameter: excludeList = /config/amc-exlude-list.txt [amc ] Parameter: movieFormat = {plex.id} [amc ] Parameter: musicFormat = {plex.id} [amc ] Parameter: seriesFormat = {plex.id} [amc ] Parameter: animeFormat = {plex.id} [amc ] Argument[0]: /watch [amc ] Use excludes: /config/amc-exlude-list.txt (24) [amc ] Ignore hidden: /watch/.DS_Store [amc ] No files selected for processing [amc ] Done ¯_(ツ)_/¯ but the logs does not show it and files in the watch folder are being named with the TMDB ... Any other idea?
  9. Thank you @Djoss! I added that variable. Now I have to test it
  10. I run FileBot v5.1.2 with Docker Image v23.11.2 successfully on UnRaid 6.12.4. FileBot watch folder function works well, too. Now, I want to specific that FileBot uses TheTVDB as database for TV Shows. I tired to specify it in the docker template, but that seems not to be working correctly. Any advice on how to do it correctly? TIA
  11. Hi @gr8zatara, in the meantime, I removed it and started with a fresh UnRaid install. I was able to setup Rclone Browser and it is synching just fine now. I believe my mistake was not reading the original instructions carefully enough. It says that "If you are using BTRFS, change your docker installation to a folder." Well - my docker installation is in NVME_DOCKER which is *not* a directory in the array ...
  12. How does this look like? the Audio share will be moved eventually into Media and the Media share will be sync'ed w/ DropBox. VM & docker settings are fine? TIA
  13. @ShadowLeague could you provide a screen shot of your shares? I have also two NVMe's which I want to setup up for docker and the other for VM's. TIA
  14. @alturismo da ich meine QNAP komplett neu aufsetze, kannst Du mir eine Empfehlung für die Einrichtung einer NVME für Docker und einen anderen NVME für VM's geben? ich hatte SpaceInvader's video dazu mehrmals angeschaut, aber einerseits war dies für Unraid 6.9 und danach war mir nicht ganz klar, ob ich es richtig gemacht hatte ... Danke im Voraus!
  15. Danke für den Hinweis! Und - ja - ich hatte gestern Probleme mit dem USB Stick beim Neuaufsetzen ... 😞