Yasuman

Seems like it might not be a bad idea then, thanks.

Okay, last question for now since I need to get another drive anyway. How beneficial would it be for me to also get a 2nd parity drive?

I should be able to replace it and just restart the build process, right? It dropped down to less than 1Mb/s now and that would take years to build.

I still get quite the amount of errors, but so far it is still rebuilding:

Well, that's looking better now: I'm gonna let it rebuild for now.

Phase 1 - find and verify superblock... Phase 2 - using internal log - zero log... ERROR: The filesystem has valuable metadata changes in a log which needs to be replayed. Mount the filesystem to replay the log, and unmount it before re-running xfs_repair. If you are unable to mount the filesystem, then use the -L option to destroy the log and attempt a repair. Note that destroying the log may cause corruption -- please attempt a mount of the filesystem before doing this. Should I just run it with -L then?

Here you go. yeji-diagnostics-20240927-1936.zip

It's because of my old, faulty HBA that caused the drive to be disabled.

Yeah, I've not only swapped cables but also the ports around. Moved disk5 from the dedicated HBA to the mainboard now. Not really sure what else I could do at this point?

I can't get the SMART test to finish at all, or even progress past 10%. I imagine that means the drive is broken/done for? I've also swapped all cables around, and other drives are working just fine on what Disk5 was connected to before.

I swapped cables around. I'm curious where/how you see issues with the dive? I'll try some more changes.

Looks like this now: And I'll attach the new diagnostics. yeji-diagnostics-20240927-1651.zip

I hope this is correct. yeji-diagnostics-20240927-1550.zip

Hello, I had to buy a new HBA because my old one was defect and the drive connected to it kept disconnecting. I properly turned off my Array, shut down the server and put the new stuff in. Now both of the old drives (just connected to a new controller) are showing "Unmountable: Unsupported or no file system". How to I rebuild this at best without data loss? This is what it looks like right now: Do I just format them both and let it rebuild? Really not sure what the best way to fix this mess is.