stevejjd

Hi all, I would like to be able to access my files from anywhere in the world using a web browser. Like my own private google drive. I don't want to have to use any special software to access my files. Is this possible to set up using unraid? Is this what an ftp server refers to? Any advice to help point me in the right direction would be appreciated. Steve

Hi everyone, Everything was running smoothly until a power outage knocked out my Unraid NAS. When I booted the NAS back up, it entered a loop with the message: "detected capacity change from 0 to 129944." To regain access to my data, I removed the USB device with Unraid installed, connected it to my Mac, and made a backup of it. I then reinstalled Unraid on the same USB device and successfully booted up with a fresh copy. I also recovered my Pro Key during this process. I used this guide https://docs.unraid.net/unraid-os/getting-started/quick-install-guide/ Before I proceed with creating a new config, my question is: can I upload the backup of my previous Unraid installation to this forum thread for some sort of diagnosis and repair or is that an insecure thing to do? I would really like to restore the previous configuration to avoid the hassle of manually setting everything up again. Is there a way to recover the previous config? Wasn't there some new way whereby the config was being backed up to the could? If so, how to recover that config? Thanks in advance for any help!

Go here, look through the issues. https://github.com/jlesage/docker-crashplan-pro/issues What worked for me was setting "CrashPlan Server Address" = SMB

Go here, look through the issues. https://github.com/jlesage/docker-crashplan-pro/issues What worked for me was setting "CrashPlan Server Address" = SMB

Thanks for pointing that out, but I already went over there and asked for support, but I didn't receive a reply.

I hope I can't get some feedback. Any help or nudge would be very appreciated.

Hi all, I'm unable to log into my CrashPlanPro Unraid Docker. I enter the correct Username, Password and entered "clients.us2.crashplan.com" as the Server Address. I get an "Unable to Sign in" error. Is there anything I can do to get crashplan working? Apologies for posting here. I posed in the crashplan thread, but haven't received a response. Any help would be greatly appreciated. Steve tower-diagnostics-20240430-1147.zip

I am unable to login. I enter the correct user name, password and used the server address of clients.us2.crashplan.com Is there anything I can do to get crashplan working?

Hi all, I have this warning on my Dashboard > Array, "Array has 1 SMART error." Is it possible for me to fix this error? Any help would be appreciated. Thanks Steve tower-diagnostics-20240404-1115.zip

Oh wow I didn't see that. Thanks for pointing that out. (embarrassing). Lets this be a lesson not to play around with Unraid when you have a migraine.

Im trying to install a VM. I set the size of the virtual disk to 1TB. I try to install the OS but the avalible disk size is extremely small.

Thanks so much for this feedback

Hi all, Does anyone have advice or can point me in a direction where I can set up my Unraid server to be accessible from anywhere in the world? Is this called an FTP server? Thanks

Thanks for pointing out the hourly scan. I set it to monthly. I think crashplan did crash during that set of diagnostics. I looked into the crashplan log and it said that it was running out of memory.

Hi all, Ive been running out of RAM on my unraid server. I found out thats why CrashPlanPro was crashing regularly. I have attached my diagnostics file. Any help would be appreciated. Thanks. tower-diagnostics-20231130-1122.zip

I really want to set up a VM to have RTX Quadro support, similar to this tech demo

Hi all, I'm a newbie when it comes to Unraid. I'm very happy with the data storage, redundancy and cloud backup features and now exploring whats possible with VMs. So far I've set up a Kitsu server for project management, and its amazing. But I want to explore whats possible with GPU rendering. I've noticed how fragile VMs are with the ability to break them easily while trying to get GPU passthrough going. Is there a way to backup VMs to preserve them from being broken? Will there be an easy way to set up GPU pass-through on Unraid? I noticed toggling between VM and pass-through breaks the VM but not the data. So far the fragility of Unraid VMs with GPU pass-through and setting up Linux, which is so easy to break, leads me to believe that setting up a render farms is way too esoteric for me. I know it may be a slightly sepperate issue, but installing the nvidia drivers is near impossible without breaking the VM of linux. I just wanted to leave a note here that I hope more development can be done to make setting up and backing up VM's way more user friendly out of the box, because there is massive potential to set up some pretty amazing stuff...like renderfarms. Steve

Sorry for my late reply. I just mean, is there a way to look at all the files on disk and also a search function through a GUI

Thank you so much, I really appreciate it : )

Hi all, me again (sorry for my newbie questions) Is it possible to create a share called scratch, that we configure to use the SSD cache pool as the primary storage, and that data stays on scratch but is backed up to the parity drive? I would like a fast scratch drive, using the SSD cache pool, where the data stays there, but is backed up to the parity drive for redundancy. Thanks Steve

Hi, is there some way we can search for files on Unraid?

I got it going and I will write notes here For anyone who finds this thread. Please take everything I say with a massive grain of salt as I actually dont know how I got it to work and don't really understand the complex notions. - install and set up your unraid. - put your iso of ubuntu in the iso share - configure the iso share to be private, and give yourself read write access - Go to VM and choose ubuntu, set it up with some cpu's, ram, point to the ISO, set network to br0, virtio-net - I dont know if this helped but go to management access and enable SSH (this could be unrelated) - install ubuntu, make sure it has a static IP when you set it up, I used this video to help - use chat gpt to help mimic each step of the process when you get stuck - configure ubuntu to have all the needed networking capabilities and settings such that other computers on the network can access it. It should work. PLease also note that CGwire is making a docker version which will be production ready at some stage. So I think, soon enough, there will be an app in the community app store, which would make it 1000% more easy to get running with the kitsu server.

Cool thanks for the reply, I will look into this ZFS suggestion.

Are there any plans to even test Unraid to work on apple ARM systems? There are some versions of linux being made for the M1. Is it anything being considered? The idea of a mac with apple silicon is really cool for particular scenarios. I could definitely imagine using a Mac Studio as a niche server for ultra fast read/write on projects as well as video encoding and some procedural stuff that mac's do well. I think its definitely worth developing.

Hi all, me again here to bother you with more questions Im a freelance 3D artist and I really want to run a task management software called Kitsu. I have seen here a yourtube clip that explains how to get it for free by installing it on a Raspberry Pi. See it here I would really love it if I can install it on unraid. Would it be possible by installing a VM, like linux? I would prefer it as a docker app.