DCox88

Has anyone else had issues with "Getting release from indexer failed" from the Knaben indexer? I have it set up through Prowlarr, and I have tested the connection. Everything is green, but I cannot grab any releases through Radarr.

Steps taken: Unplugged and reseated SATA and power connectors. Rebooted server, errors still present on rebuild. Powered down server, replaced SATA cable with extra one. Rebooted server, errors still present on rebuild. Replaced SATA cable with old one. Disconnected Disk2 sata cable from PCIE sata card, swapped it to SATA port on motherboard with another drive. No errors for Disk2 on rebuild, 8 hour estimate for rebuild. No errors show on the drive that is newly connected to PCIE SATA card, will continue to monitor.

Disk 2 corrupted, and I'm attempting to rebuild. I've only had the drive a few weeks, it's a 4TB WD RED. The rebuild is estimating over 30+ days, and there's errors and warning messages appearing on the drive in question. The errors that concerned me were: Oct 4 20:29:03 Tower kernel: ata12.00: exception Emask 0x10 SAct 0xf0000 SErr 0x49f0000 action 0xe frozen Oct 4 20:29:03 Tower kernel: ata12.00: irq_stat 0x00400000, PHY RDY changed Oct 4 20:29:03 Tower kernel: ata12: SError: { PHYRdyChg PHYInt CommWake 10B8B Dispar LinkSeq DevExch } Oct 4 20:29:03 Tower kernel: ata12.00: failed command: WRITE FPDMA QUEUED Oct 4 20:29:03 Tower kernel: ata12.00: cmd 61/40:80:80:d5:6a/05:00:00:00:00/40 tag 16 ncq dma 688128 out Oct 4 20:29:03 Tower kernel: ata12.00: status: { DRDY } Oct 4 20:29:03 Tower kernel: ata12.00: failed command: WRITE FPDMA QUEUED Oct 4 20:29:03 Tower kernel: ata12.00: cmd 61/40:88:c0:da:6a/05:00:00:00:00/40 tag 17 ncq dma 688128 out Oct 4 20:29:03 Tower kernel: ata12.00: status: { DRDY } Oct 4 20:29:03 Tower kernel: ata12.00: failed command: WRITE FPDMA QUEUED Oct 4 20:29:03 Tower kernel: ata12.00: cmd 61/40:90:00:e0:6a/05:00:00:00:00/40 tag 18 ncq dma 688128 out Oct 4 20:29:03 Tower kernel: ata12.00: status: { DRDY } Oct 4 20:29:03 Tower kernel: ata12.00: failed command: WRITE FPDMA QUEUED Oct 4 20:29:03 Tower kernel: ata12.00: cmd 61/68:98:40:e5:6a/02:00:00:00:00/40 tag 19 ncq dma 315392 out Oct 4 20:29:03 Tower kernel: ata12.00: status: { DRDY } Oct 4 20:29:03 Tower kernel: ata12: hard resetting link Oct 4 20:29:04 Tower kernel: ata12: found unknown device (class 0) Oct 4 20:29:04 Tower kernel: ata12: SATA link down (SStatus 0 SControl 310) Oct 4 20:29:05 Tower kernel: ata12: hard resetting link Oct 4 20:29:10 Tower kernel: ata12: found unknown device (class 0) Oct 4 20:29:11 Tower kernel: ata12: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Oct 4 20:29:11 Tower kernel: ata12.00: configured for UDMA/33 Oct 4 20:29:11 Tower kernel: ata12: EH complete tower-diagnostics-20231004-2040.zip