Smokie

I just rebooted it and it took a while to come back up. She’s replying to a ping and the webpage loaded at first now it wont load and I can’t ssh into it. Back up now with a hard reset

Does the syslog server not need to send the diags to another machine? I have a old synology NAS i could probably use

Will it keep the diags if I have to hard reset it? If it goes I normally can’t get access. Is there a command to run from ssh that will create and download the diags?

Web page became unresponsive again and it stopped replying to a ping. I rebooted and I am back, Download the diagnostics and attached if anyone can let me know what’s wrong> battlestar-diagnostics-20260729-2107.zip

I have the NIC running at 2.5gb, I had to add ethtool -s eth0 speed 2500 duplex full autoneg on to the /boot/config/go Now if anyone can help me on why the GUI becomes unloadable that would be great. I’ll watch it with the 2.5gb Nic to see if it happens again

I installed it and booted the server up. It picked it up as 2.5gb but it was set as eth1. I rebooted and disabled the built in NIC in the bios and configured the USB on with the correct IP. Eth0 is now using the USB NIC but its only 1gb.. Any ideas?

Hi All, As above I can hit the page every time but when I log in it just sits on a blank screen. It’s the same when I try logging in using tailscale. All my docker containers are up and running and can be accessed via webpages. I’m running the latest stable update 7.3 I think . The issue just seems to be with the GUI. I can’t seem to ssh into it either so the only way to get it back is to hard reset it, Obviously this is not ideal and it might work for a day or two before we are back the the start. I also have a 2.5gb USB to Ethernet adapter I want to use. Is it possible to disable the onboard NIC on the GUI and configure the USB one with the same IP so I don’t have to change anything else? Thanks In advance.

Ahh ok. So I need one with ASM1064 chip? Is this ok to purchase? https://amzn.eu/d/0aul0uml

I’m using a SATA 3.0 Expansion Card 4-Port PCIE to SATA 3.0 Expansion Controller Card Adapter 6G Before I purchased it I checked to see if they can be used with Unraid and a lot of people are using them also. My motherboard only has 4 data ports and I have 8 drives. This was the only way to expand. I woke up this morning and the server is unresponsive to a ping but still powered up. I’ll have to hard shut it down

I ran memtest and it passed. Decided to replace the cache drive so now have that all back up and running. I have the VM Issue resolved now aswell. I can also set the fans. The new thing now is that drive 5 became visible in the unassigned devices. I had to shut the array down and remove it, Started it back up and then shut it down and added it again. It’s currently being rebuilt and 20% into it drive 4 is giving errors and is now in the unassigned devices tab. These are all brand new drives and I only have about 3tb of data on the server. All this data is on drive 1. Drive 2,3,4,5 are all empty when I explore them. I’ve attached a new diagnostic zip file. Is my data going to be gone since drive 4 is in error while drive 5 is being rebuilt. Thanks in advance battlestar-diagnostics-20260622-2102.zip

ok I’ll run it overnight. Has anyone noticed from the logs why I can’t pass through an NVME drive to VM?? Also is there anything us novices should be looking for in our diagnostic files? I’d like to be able to try diagnose things myself before coming here Thanks in advance.

Run a mem on a reboot or should I download a CA memtest container and run it?

Hi all, So I recently had to change my motherboard and decided to go with the Gigabyte Technology Co., Ltd. B550M AORUS ELITE AX Once I changed it and booted back up everything seemed to be ok. I then proceeded to update unraid and have come across a few issues that I can’t seem to resolve. (1) I have a nvme and a ssd configured as cache and since the update I have been getting some mixed errors. Yesterday it was degrading but after a reboot the pool is showing as online but a yellow triangle and has thousands of errors on both drives. (2) I had a windows VM setup and previously passed through a NVME drive so windows can use it. The issue now is that a lot of devices are greyed out in the system devices tab. My NVME drive is in another SCSI devices menu below and as I said most devices are greyed out. (3) I have FANCTRL PLUS Installed but it can not see any PMW controller. Im sure there might be some other little things I haven’t noticed yet and would appreciate any help. I have attached diagnostics download file and if anything else is needed just let me know. battlestar-diagnostics-20260616-2244.zip

Sorry guys a rookie mistake. I never noticed that unsaid connect had to be updated first. I’ve never had to do it before but I missed it this time.

Screenshot attached