Chris Teasdale

As of Version 7.1.2 Unraid does not mount my drives in my thunderbolt enclosures (OWC Thunderbay 8 and OWC Flex 1U4) and they work perfectly in 6.12.14

Well that is the step in the right direction. Werid then the portable Wavelink Thunderbolt drive is detected and it showed the drive brand and name in unassigned devices in the GUI but with no drive size as also shown below in the log. This is all a bit above my skill set but it seems strange. Is there more info I can provide? Feb 8 20:24:17 unRAID kernel: thunderbolt 0-101: Wavlink UTE02 Feb 8 20:25:18 unRAID emhttpd: device /dev/nvme1n1 has size zero

My upgrade to 7.0 didn't go so well. Both of my thunderbolt enclosures (OWC Thunderbay 8 and OWC Flex 1U4) failed to show any drives in unRAID 7.0 and I was forced to roll back to 6.12.14. I tried to make some tweaks under system devices in 7.0 with no luck. Aren't support for the thunderbolt controllers built into the kernel? Working in 6.12.14 are the following: Intel Corporation JHL6540 Thunderbolt 3 Bridge and Intel Corporation JHL7440 Thunderbolt 3 Bridge and they are hooked to a Minisforum ms-01 using and Intel Corporation Raptor Lake-P Thunderbolt 4 USB Controller. Attached logs from working 6.12.14 and not working 7.0. I also hooked up a portable Thunderbolt SSD (intel controller) to both the host directly and downstream OWC enclosures ports and this was recognized in 7.0 with SSD information (unassigned devices) but drive showed as spun down and also didn't show any partitions or capacity and I was unable to bring up more info, clear or partition the SSD. This again all working without issue in 6.12.14. Any help is much appreciated. unraid-diagnostics-20250208-2033_6.12.14.zip unraid-diagnostics-20250208_1227_7.0.0.zip

My upgrade to 7.0 didn't go so well. Both of my thunderbolt enclosures (OWC Thunderbay 8 and OWC Flex 1U4) failed to show any drives in unRAID 7.0 and I was forced to roll back 6.12.14. I tried to make some tweaks under system devices under 7.0 with no luck. Aren't support for the thunderbolts controllers built into the kernel? Working in 6.12.14 are the following: Intel Corporation JHL6540 Thunderbolt 3 Bridge and Intel Corporation JHL7440 Thunderbolt 3 Bridge and they are hooked to a Minisforum ms-01 using and Intel Corporation Raptor Lake-P Thunderbolt 4 USB Controller. Attached logs requested during downgrade from 7.0 to 6.12.14. Any thoughts? unraid-diagnostics-20250125_1120.zip

It is broken and Lime Tech will tell you to talk to Apple and Apple will ignore you. So after Unraid trial I decided why pay for broken software whomever is to blame. I am not getting rid of the Macs I own just for Unraid to work. Microsoft has figured how to make SMB work with MacOS. Lime Tech should be able to as well.