linuxdevil

Thanks for that; I will just wait it out, as I can delete things in the Vaultwarden app if I have to. It is not often that I have to delete something in Bitwarden.

Every so often, AI is helpful. Perplexity found three threads in 20 seconds. I guess the one you are looking for is this one: https://community.bitwarden.com/t/unable-to-remove-vault-items-in-extensions-third-party-server/86597 or maybe this one on GitHub: https://github.com/dani-garcia/vaultwarden/issues/6003

All I can do is confirm the issue. In Vaultwarden server app I still have the delete option, but not in the Bitwarden browser apps for Chrome or Firefox. I have not investigated any further due to lack of time. Edit: Deleting still works on the Bitwaeden Android app.

That did the job, thanks a lot.

Hi, could you please explain to a newbie how you got it working again?

Unfortunately, my Vaultwarden install stopped loading the GUI. I can get into the admin page with no problem. The log shows nothing abnormal in my understanding. Being quite the newb with Vaultwarden and only halfway educated with Unraid, I don't know how to move on. If you need anything more, just let me know.

Works as expected now. Thanks for updating the container in such a timely manner. I think, making containers available in a Tailnet is a great idea and will continue to further Unraid fame. I am a tech journalist. I have covered Unraid before and will write an article for a German Linux print magazine on Tailscale in Unraid.

Thanks for that. Do I have to force the update?

Faster than lightning. Thanks.

Hi, I am using your Jellyfin container on an Unraid server that runs v7.0.0-rc2. The other day, I tried to activate Tailscale inside that container, as I had done with a few others. Unfortunately, with your container, that did not work. I opened a ticket with Unraid support that ended in a thread here on the forum. The gist of what I got from the ticket and the thread was, that the activation of Tailscale within your Jellyfin container did not succeed because of the tool 'which' missing from your container. Would it be possible for you to update your container with said tool included?

Thank you, I will do that.

Thanks for your input. I guess the easiest thing to do is use the official Jellyfin container. Now here is my question: If I delete the container, will my content be still there, given I use the same paths in the config of the official container? I never switched a container in this way.

Hi, since I could not find a dedicated forum for tailscale within Unraid, I will post my issue here: I have a Tailnet with all my devices in it, including one of my Unraid servers. I am trying to implement Tailscale into a Jellyfin container (following Spaceinvaders YouTube 'The Ultimate Guide on Unraid'). I activate Tailscale in Edit, give it a name and save it. Now I need to look at the log to get the IP to authenticate the service, but what I get is the normal log that shows the start of Jellyfin, obviously without the necessary link. I have added Tailscale to 3 containers on the same server without a problem, just Jellyfin resists to show the right log with the link. Is there another way to get to that link? Is there a known reason why Jellyfin would resist? The process is so awesomely easy, that you basically can't go wrong. dxp4800_plus-diagnostics-20241230-1745.zip

Unfortunately, it does not reboot, just keeps counting: System is going down... 431. Do I have to turn it off the hard way? PS: I cold booted it. Dockers are back, Parity-Check running. So things seem to be ok. Thanks for your time.

As the title says, my docker service has been trying to start for ~ 3 hours. What happened: I tried to follow a YouTube by Space Invader One about installing Nextcloud AIO. At one point, i had to stop docker to set 'Preserve user defined networks' to 'yes'. After that, I turned docker back on. It kept spinning for more than half an hour. When I next checked, it just said 'Docker Service failed to start' in the docker tab. At the bottom, next to 'Array Started' it still says 'Starting services'. Any ideas how to bring it back to life? tower-diagnostics-20240919-0519.zip

Thank you for your insights, I will enable the syslog server.

Ok, easily done. Here is my latest diagnostics filetower-diagnostics-20240919-0519.zip

Can I get the file without connecting the stick to my PC? If not, I will shut the server down once the parity check is done and post the file here. I got most things up and running. My main concern now is: Why did this happen and will it likely happen again?

Hi, one of my 2 Unraid servers had an unclean shutdown yesterday, which I only found out hours later. I was not using Unraid actively at the time of the shutdown, but there were ~ 15 dockers running. When I tried to use one of the dockers, it would not respond. So I looked at Unraid and it was down. The server was running, I could hear the fans. I could also ping the IP just fine. So I hit the power button for a split second, but nothing came up. In the end, I turned the server off and pulled the USB stick. The parity.check.tuning.log tells me, that there was an unclean shutdown. The last diagnostics file is ~ 6 weeks old, so that will not be any good. The server was built by me ~ 1 year ago with brand-new parts and never moved from his spot since, temperatures are low. I am not very versed in debugging situations like this, so any hints on how to move on from here to get the server back up are very much appreciated. PS: I got it back up by putting the stick in a different USB port as before. Right now, it is parity checking (for the next 8 hours). Is it normal, that I can't use my dockers during that period or did they not survive the unclean shutdown?

Hi, still kind of new to Unraid. I have some containers running fine (Immich, Nextcloud, Paperless-NGX) All of these are shared to my Linux desktop through SMB. Just that only on Paperless-NGX I cannot see any content (see screenshot of setup) I checked and could not find any difference in how e.g. Nextcloud and Paperless are set up regarding shares. But the folders in the Paperless-NGX share don't populate.

Works now. Thank you.

HDDs are XFS. I have not rebooted yet, because I am copying data from an old slow NAS to the DXP4800+. I will reboot tomorrow, as soon as the copying is done, and report back.

Thanks a lot for providing a plugin to handle LEDs on Ugreen NASync devices. I installed it the other day on my DXP4800+ and the network LED works correctly (blue=1GBit/s) The 4 LEDs for the drives are white and static, no reaction to HDD activity. Any ideas how to fix that? Can I provide any logs?

Sorry, did not have time to further investigate.

Thanks. Some things can be so easy