recreational-regulation8230

not convinced because seen those drivers before i did all this, and which is the motherbaord? also my cpu is spiking alot not sure because of all this.

now just unloaded drivers the click on detect,load drivers and the above vanished now

ok did sensors detect now in system temp i get this, still does not look correct

i get this: Adapter: ISA adapter in0: 728.00 mV (min = +0.00 V, max = +1.74 V) in1: 1.67 V (min = +0.00 V, max = +0.00 V) ALARM in2: 3.44 V (min = +0.00 V, max = +0.00 V) ALARM in3: 3.34 V (min = +0.00 V, max = +0.00 V) ALARM in4: 1000.00 mV (min = +0.00 V, max = +0.00 V) ALARM in5: 896.00 mV (min = +0.00 V, max = +0.00 V) in6: 1.35 V (min = +0.00 V, max = +0.00 V) ALARM in7: 3.42 V (min = +0.00 V, max = +0.00 V) ALARM in8: 3.23 V (min = +0.00 V, max = +0.00 V) ALARM in9: 1.06 V (min = +0.00 V, max = +0.00 V) ALARM in10: 1.06 V (min = +0.00 V, max = +0.00 V) ALARM in11: 832.00 mV (min = +0.00 V, max = +0.00 V) ALARM in12: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM in13: 488.00 mV (min = +0.00 V, max = +0.00 V) ALARM in14: 1.51 V (min = +0.00 V, max = +0.00 V) ALARM fan1: 0 RPM (min = 0 RPM) fan2: 396 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 0 RPM (min = 0 RPM) fan5: 0 RPM (min = 0 RPM) fan6: 0 RPM (min = 0 RPM) fan7: 0 RPM (min = 0 RPM) SYSTIN: +19.0°C (high = +80.0°C, hyst = +75.0°C) (crit = +100.0°C) sensor = thermistor CPUTIN: +6.0°C (high = +127.0°C, hyst = +110.0°C) (crit = +100.0°C) sensor = thermistor AUXTIN0: +8.0°C (high = +80.0°C, hyst = +75.0°C) (crit = +100.0°C) sensor = thermistor AUXTIN1: +23.0°C (high = +80.0°C, hyst = +75.0°C) (crit = +100.0°C) sensor = thermistor AUXTIN2: +35.0°C (high = +80.0°C, hyst = +75.0°C) (crit = +100.0°C) sensor = thermistor AUXTIN3: -1.0°C (high = +80.0°C, hyst = +75.0°C) (crit = +100.0°C) sensor = thermistor PECI Agent 0: +13.5°C (high = +80.0°C, hyst = +75.0°C) AUXTIN4: +32.0°C (high = +80.0°C, hyst = +75.0°C) (crit = +100.0°C) PCH_CHIP_CPU_MAX_TEMP: +0.0°C PCH_CHIP_TEMP: +0.0°C PCH_CPU_TEMP: +0.0°C PCH_MCH_TEMP: +0.0°C intrusion0: ALARM intrusion1: ALARM beep_enable: disabled nvme-pci-0100 Adapter: PCI adapter Composite: +20.9°C (low = -0.1°C, high = +84.8°C) (crit = +94.8°C) Sensor 1: +20.9°C (low = -273.1°C, high = +65261.8°C) Sensor 2: +30.9°C (low = -273.1°C, high = +65261.8°C) Sensor 8: +20.9°C (low = -273.1°C, high = +65261.8°C) nvme-pci-0200 Adapter: PCI adapter Composite: +23.9°C (low = -0.1°C, high = +84.8°C) (crit = +94.8°C) Sensor 1: +23.9°C (low = -273.1°C, high = +65261.8°C) Sensor 2: +40.9°C (low = -273.1°C, high = +65261.8°C) Sensor 8: +23.9°C (low = -273.1°C, high = +65261.8°C)

rebooted but nothing changed. Will not detect driver

no such file or directory for both commands

this is far has i have got root@Media-Server:~# cd /etc/sensors.d root@Media-Server:/etc/sensors.d# wget https://github.com/petersulyok/asrock_z690_extreme/blob/main/Z690_Extreme.conf --2025-01-02 15:30:51-- https://github.com/petersulyok/asrock_z690_extreme/blob/main/Z690_Extreme.conf Resolving github.com (github.com)... 20.26.156.215 Connecting to github.com (github.com)|20.26.156.215|:443... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: ‘Z690_Extreme.conf’ Z690_Extreme.conf [ <=> ] 265.66K --.-KB/s in 0.05s 2025-01-02 15:30:52 (5.10 MB/s) - ‘Z690_Extreme.conf’ saved [272039]

Hi, i have got to the terminal commands posted above now trying this: systemctl restart lm_sensors.service displays command not found?

Ok will try in a few days using a separate unraid usb in case i mess up.

Do i have to be concerned about enabling this: acpi_enforce_resources=lax?

yea good idea will give it a go sometime when i have time.

Thanks JorgeB for your quick responce as always. Yes the comreset error never appears again after wake up.

media-server-diagnostics-20241230-1552.zip

I posted a few days ago on error logs appearing but was told to ignore. I have a few more now i suppose this is the same just thought i would check. ata2: COMRESET failed (errno=-16) the above appears three times and is after a restart/wake up from sleep kernel: xhci_hcd 0000:00:14.0: xHC error in resume, USBSTS 0x411, Reinit ERROR As before my server is working with no issues.

Thanks for your help but will give this a miss too complicated, im a beginner and don't want to mess my server up just to see temp. The dynamix plugin does not work a driver appears but is the wrong one.

Thank you for the above i am new to unraid, will try this later tonight. Do i just do the above or need to go through everything you detailed in post 1?

Thanks this is way over my head will leave alone.

HI, i have an asrock Z690 extreme and all i want is the temp,motherboard sensors to show up using the dynamix system temp. I am worried about the warnings above, the settings are the same in above example also, would i be ok?

Hi, i am new to all this and just installed powertop. followed first post done all that is required, so am i correct in i am only getting C3 states? my motherboard is: Asrock Z690 Extreme with an i5 12600K.

Happy Christmas. This is not an issue and does not effect my server in anyway, so just wondering about these warning messages in my logs: kernel: x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks kernel: ACPI: Early table checksum verification disabled Dec 27 14:56:39 floppy0: no floppy controllers found Dec 27 14:56:48 mcelog: failed to prefill DIMM database from DMI data

Hi everyone a newbie here. I have an Asrock Z690 Extreme motherboard and 12th Gen Intel® Core™ i5-12600K not detecting my temp. i get available drivers as coretemp nct6775 motherboard, cpu not used - and can not load anything. having used google i got the following info: For the ASRock Z690 Extreme motherboard, you’ll need to configure the Dynamix System Temperature plugin to detect and display the motherboard temperature and fan speeds. Since the Z690 Extreme uses the W83795ADG-I2C sensor, you’ll need to specify the correct chip and settings in the plugin configuration. In the Dynamix System Temperature plugin settings, add the following lines to the sensors.conf file: chip "w83795adg-i2c-0-2e" ignore "fan4" label "temp1" "CPU Temp" label "temp6" "MB Temp" label "fan1" "Array Fan" label "fan2" "Array Fan" label "fan3" "Array Fan" label "fan5" "Array Fan" Save the changes and reload the plugin. Having looked into the config but i have no sensors.conf not sure what to do

Thank you learn something everyday, i changed it to auto, now is working and created the media folder on disk 2

media then inside movies,Tv shows folders

So i am transferring data from a synology to unraid and all is well except: I have 2x20tb HD (Data) no parity been used will start after transfer. Min disk space set at 100GB, disk 1,2 checked. disk 1 only 54gb free space i can now not transfer anything without an error seems not transfering over to disk 2 which is empty. The file/movie is over 90GB so am i correct it should move to disk 2 tried using the built in browser mover and also krusader same issue. media-server-diagnostics-20241209-1305.zip