enkrypt3d

for some reason the syslinux folder was empty in my cloud backup! I flashed 7.2.4, grabbed the contents of syslinux, restored my flash drive from the backups (luckily it had the CFG's) and copied the syslinux folder over to it then ran the makebootable.bat as admin.... finally back up and running.... smfh

7.2.4 tried to upgrade, it said USB drive is gone, restored from backup, reflashed, now it wont boot.... why did I even touch it!? God dammit so fkn pissed...... Tried to upgrade 7.2.5 but that didn't finish and it said USB flash drive was "corrupt or gone". had no issues with it before. So I reflashed it with a restore image from unraid connect. Now it does not boot at ALL. WTF!! HELP!

The issue is I dont have these plugins installed. so why is it showing this error? What is apollo?

The system seems OK but I do not recognize these plugins? This error did not happen on 7.1.1.......

my USB is 256GB and has plenty of space. getting this error going from 7.1.1 to 7.1.4....... ??????????

Woke up to this - server won't start and it says "execution error, server error" when trying to start the minecraft bedrock container. any ideas what is going on? I dont have any other issues with this server other than this..... OSError: [Errno 107] Transport endpoint is not connected Traceback (most recent call last): File "/usr/lib/python3.13/site-packages/supervisor/loggers.py", line 109, in emit self.flush() ~~~~~~~~~~^^ File "/usr/lib/python3.13/site-packages/supervisor/loggers.py", line 68, in flush self.stream.flush() ~~~~~~~~~~~~~~~~~^^ OSError: [Errno 107] Transport endpoint is not connected OSError: [Errno 107] Transport endpoint is not connected During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/bin/supervisord", line 33, in <module> sys.exit(load_entry_point('supervisor==4.2.5', 'console_scripts', 'supervisord')()) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^ File "/usr/lib/python3.13/site-packages/supervisor/supervisord.py", line 361, in main options.close_logger() ~~~~~~~~~~~~~~~~~~~~^^ File "/usr/lib/python3.13/site-packages/supervisor/options.py", line 1250, in close_logger self.logger.close() ~~~~~~~~~~~~~~~~~^^ File "/usr/lib/python3.13/site-packages/supervisor/loggers.py", line 311, in close handler.close() ~~~~~~~~~~~~~^^ File "/usr/lib/python3.13/site-packages/supervisor/loggers.py", line 86, in close self.stream.close() ~~~~~~~~~~~~~~~~~^^ OSError: [Errno 107] Transport endpoint is not connected 2025-05-03 10:53:24,004 INFO stopped: start-script (exit status 0) 2025-05-03 10:53:24,004 DEBG received SIGCHLD indicating a child quit 2025-05-03 10:53:24,005 DEBG killing purge-script (pid 100) with signal SIGTERM 2025-05-03 10:53:24,006 DEBG fd 11 closed, stopped monitoring <POutputDispatcher at 22457936548304 for <Subprocess at 22457950487568 with name purge-script in state STOPPING> (stdout)> 2025-05-03 10:53:24,007 DEBG fd 15 closed, stopped monitoring <POutputDispatcher at 22457936254992 for <Subprocess at 22457950487568 with name purge-script in state STOPPING> (stderr)> 2025-05-03 10:53:24,007 WARN stopped: purge-script (exit status 143) 2025-05-03 10:53:24,007 DEBG received SIGCHLD indicating a child quit

@binhex anything?

Reposting my question - how do i install mods on this version? I cant find any documentation on this...... @binhex

Binhex, how do you load mods like essentialX onto the bedrock docker container? I haven't found any guides that I can find... please help thank u!

https://www.amazon.com/gp/product/B01N0MHODJ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 This is what i used to connect my LSI 9500 to my SAS3 expander.... what motherboard do u have?

I cannot update my docker container. no matter how many times I try, it does not actually update the plex app..... the update function appears to be working and gives no errors....... please help! And just like that the container updated but now I can't get to the plex server anymore even though it says it's running........ Edit - welp I guess I had to start over...... i guess it'll take all night to reindex everything...... Local GUI is broken again..... wtf is going on? It was rescanning my media library now it's failing again.....

is this supported yet on unraid? What versions have this feature?

I am on the latest non beta version and it completely deleted the VM I had on DISK2...... nothing there. The domains folder is there but it totally deleted my home assistant folder with the VM in it...... WTF? Why did this happen? Nothing in the logs from what I can see..... LUCKILY I had a clone of it that was only a bit older than a month on another disk so I was able to recover most of it...... insanity why did this happen? And what can I do to take scheduled snapshots of these VM's?

Had this issue and it turned out to be dedup was enabled. I figured I had enough horse power to do it but I guess not 8x 14TB SATA 6Gbps drives in RAIDZ1 4x 2TB NVME M.2 for main array AMD EPYC 7532 32 Core / 64 threads 128GB DDR4 3200Mhz RAM 3090 GPU Passthrough I wish Unraid supported GRAID!

I just realized I need a Slimsas cable between the U.2 ports on the motherboard to enable PCIE Slot 7?? I'm not sure if this is needed if I'm using 2x m.2 drives that are on board though.....

SAS3-826EL1-N4

I have 9x 14TB 7200RPM SATA 6 drives in a RAIDZ1 group and 4x 2TB NVME disks for the main array and one 2TB nvme cache disk. Whenever data is moved between the NVME array (the main unraid array) to the zpool, IO wait shoots up to 50% and disk backlog is also insanely high. Is this normal? what can I do to improve this? The rest of the specs: AMD EPYC 7532 32 Core 64 thread CPU 2.4Ghz 128GB DDR4 3200Mhz RAM Gigabyte mz32-ar0 Rev 3 motherboard LSI 9500 16i HBA connected to a sas3-826el1-n4 backplane using 2 ports on the backplane.

I have an LSI 9500 16i controller, does it care if I move things around to balance out the chassis on my SAS3 backplane? Or should I just leave it alone?

SAS3-826EL1-N4

So right now i have the 74 pin Slimline SAS to Mini HD SAS going to the backplane which is working. I have both connections to the black connections on the backplane. I'm assuming that is all I need. I don't yet have any U.2 drives as they're pretty expensive. Eventually I will though probably.

It appears that the only card that would work for those supermicro cables is this one but it's not worth spending $800 on it. This is the broadcom 9460 RAID card - which I don't even need a raid card with unraid..... so I guess the rear slots will be inop But for the front SAS3 backplane, which supports NVME u.2/u.3, can I use the same cable above to plug into the white ports or do I only need the one plugged in? Right now I have one 74 pin cable coming from the card to 2 HD Mini SAS 4i SFF-8643's into the SAS3-826EL1-N4 backplane...

This is the rear NVME 2.5" drive slot. it requires a 4 pin molex for power and 2 sata ports and that 8 pin connector. I guess I won't be able to use it with the LSI 9500 16i

CBL-SFF8643-SATASB-06M L5-00220-00 0.6m ü is the closest thing but I do not see one that has the 74 pin Slimline SAS on the other end. Never seen that 8 pin cable along with the 4 SATA ports... that is the type of cable that came with my chassis. Also what is IT mode and do I need it?

The only issue I have is this Supermicro 826 case has the 2 NVME drives in the rear that has a SFF 8654 to 4x SATA and some odd 8 pin cable... no idea what kind of cable I can use to bring those drives online. ? The LSI has the 74 pin: Using this cable to connect to the SAS3 expander:

HI I ordered this card along with the cables to attach to my SAS expander, will this work for unraid? My motherboard is GIGABYTE MZ32-AR0 Rev 3.0 with an AMD Epyc 7532 128GB RAM and 6x 14TB SATA drives along with a handful of m.2 NVME. The motherboard has many SAS/SATA ports but none of them work directly to SAS expander so I'm hoping this controller will work? Any ideas? Thanks!