gecl

is there a way to remove the errors?

syslog-10.27.27.231.log Does this explain why it locked up?

I thought I did, to save to SSD, but I don't see it in that folder. What settings do I ned to change?

server-syslog-20250227-2020.zipDoes this one show anything?

Here is my syslogserver-syslog-20250124-1941.zip

I updated bios to FFc, and set Power Supply Idle Control to "typical current idle" and it locked up again. I've attached the diagnostics. server-diagnostics-20250102-1313.zip

It took itself off the network, locked up, and wouldn't display through gpu to screen. server-diagnostics-20241231-1356.zip

What do you mean by "Since the emulated disk is mounting, and assuming contents look correct, you can then rebuild on top", can you explain this.

I've replaced disk 2 with my 4th drive in last month. I can't remember what the other issue was but this time its UDMA. What am I doing wrong, and can Disk 2 be enabled? server-diagnostics-20241218-1544.zip

Thanks, and what has the GPU display boot?

Not passing GPU through to VM When GPU is connected all the HDMIs on the Motherboard and the GPU stop transmitting. Is it a bios setting to make the motherboard GPU still display boot screen?

3050 Is the only GPU, I don't know what bound to vfio means.

Is there a bios setting to display the boot/terminal on a monitor? When I boot without the 3050 connected, I can see the boot screen, but when it boots and the 3050 is running, all my HDMI ports stop working, and I can't view the boot screen from either the native HDMI ports or the ones on the GPU. AMD Ryzen 7 5700G CPU Gigabyte B550I Aorus PRO AM4

Can I use the keyboard to pull the diagnostics because I can't access the GUI? It's in the middle of rebuilding parity as I just replaced a failed drive so I'm hesitant to do a hard reboot. Is there any other way to get to the GUI than through the IP 10.xxx.xxx.xxx? I can ping the server and the apps are responding but I can't see the dashboard, main, or login screen. Is there a way to see if parity rebuild is complete without having the GUI?

Can I use the keyboard to pull the diagnostics because I can't access the GUI? It's in the middle of rebuilding parity as I just replaced a failed drive so I'm hesitant to do a hard reboot. Is there any other way to get to the GUI than through the IP 10.xxx.xxx.xxx? I can ping the server and the apps are responding but I can't see the dashboard, main, or login screen. Is there a way to see if parity rebuild is complete without having the GUI?

I have a PCIe coral (M.2 A+E). Running HAOS as VM and when I use Coral's directions https://coral.ai/docs/m2/get-started/#2a-on-linux When I try to add the Debian package I get this error curl: (23) Failure writing output to destination

How do I pass through Coral to Home Assistant VM to use on Frigate? I have the Coral plugin running, but when the frigate yaml file says: detectors: coral: type: edgetpu device: pci It acts as if theres nothing there. Thanks

Is there any way to use a GPU to do the transcoding to take the load off the CPU?

Is there any way to use an Nvidia GPU? When I select Hardware/ H.265 NVENC 1080p its just my CPU doing the tasking. Thanks

Is it possible to use the GPU to do the transcoding in Handbrake and MKVToolNix? For example in Handbrake when i select the Hardware H.265 NEVC 1080p option my CPU does the work, while the GPU sits idle. IDK if i need to change a prefrence in the GUI or if its through the docker edit function. Thanks

Whenever I try to boot unraid with Nvidia 3050 plugged in using a riser cable it won't even get to the bios page, it doesn't do anything. when I turn it off and pull power to the GPU it starts up just fine. It is a Gigabyte B550I motherboard running bios FCb using AMD Ryzen 7 5700G with Radeon Graphics as CPU. I have the Nvidia and the GPU statistics plugin installed. Nvidia Driver Version: 550.67. If I boot the system and then plug the GPU in I get the error reading "NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running" Thanks

Ive tried to update two different dockers (Jellyfin, MKVtoolnix) and they wont update. The link says updates available but when i click to update it will say The command finished successfully! but "TOTAL DATA PULLED: 0 B" and update didn't go through server-diagnostics-20240207-2053.zip

changed MTU back to 1500 and installed RTL8125 driver finally able to complete 12.6 update.

its an realtek r8125 card, im doing the driver

Here are the diagnostics for 11.5 server-diagnostics-20240109-1406.zip