Dick Dawson

Sorted. Just had to go into advanced mode and change the webui address (I just increased the number by 1), then click show more settings at the bottom and again make the same change in both the Tunnel Metrics field and the Metrics Port field (again I just increased the number by 1). Worked perfectly. Now I can use CloudFlare to password the tunnels with different logins and I can share some and not others. Perfect setup for me.

Is there anyway to run multiples of this docker without errors? I know I can add routes to the same one in cloudflare but have a couple lets me set different logins using cloudflare and I do kinda need that. Any thoughts? Seems to be an issue with duplicate ports maybe?

This docker installs well and all for me BUT there are two issues as I can find. 1) It does NOT like dual CPU's so in the VM unpin one. 2) Set Primary vDisk Bus to SATA in the VM config as well. After those two fixes I got it up and running well and I am just at the setup stage. Thing is SpaceInvaderOne had a video guide but it seems to be gone. Bummer. So now it's off to figure out the setup I guess BUT it works for me here on an old HP Z820. IF you gt the downloading errors just try again after a few min. SpaceInvaderOne has the files stored on free hosting services and at times they have reached their limits.

I just went through this and my app data and all was still in tach so when I switched computers and plugged in my usb boom it worked. shares were there and all BUT... I used the exact same make and model computer so... I do know on my system, HP z820 I had to flash the bios into IT mode so unraid had control of the drives and all. before I did that it was a total mess of failure. Maybe thats a thing needed? It might be an issue of storage controller not being the same?

I would like to add into this one that the addition of some of the new AI containers have brought us to a point where increasing the size of the docker image is now a thing to do. I have mine on a twin SSD cache and it screams. well worth it. I upped mine to 60Gig and it still wasn't enough to handle the LocalAI docker install. (I also have EasyDiffusion installed as well) LocalAI installs an easy 16Gigs of downloads and then extracts them. It's huge. (edit) after the LocalAI install finally worked with the larger Docker image it them proceeded to download a lot more data. Another huge amount. I really suggest at least an 80Gig Docker image for these massive docker images

404 on the Wiki that is posted at the beginning of this thread. I am hoping it's just an issue and it's not gone. Finding time to tread through 71 pages isn't going to be easy. Does anyone know?

this thread is now kinda useless as its wiki is gone so the instruction are also gone. Just saying.

Same here actually. It's this new router/modem for sure. The thing is a proper POS. Half the damn settings have been moved to a freekin moronic phone app now and things are missing and all. I am quite convinced it was the culprit that sent me down the rabbit hole messing things in my network settings up. This to me is an issue with everyone doing how to's on video now instead of lets say blog posts or forums maybe as the info ages poorly and yet it stays up. I never would have turned IPV6 off if I wasn't advised to. Oh well. lessons learned and all. Now to dig into my new CloudFlare account/domain and get nextcloud all sorted out. Thanks again!

SHOOT I wanted to mark itimpi as the solution but I had to add the IPV6 stuff to make sure others knew but it was itimpi that got me going so all credit is theirs.

OK. That did rebuild the file but still I was lost, but I did fix it. After the network.cfg was rebuilt and the server rebooted into GUI mode I tried CA plugin and nothing. it gave me the change ur DNS page and sure enough they were from ISP so for sure the file rebuild worked. I set them to the ones recommended and still nothing. Then I remembered in a spaceinvader video I had watched on YouTube to learn a little UNRAID I was advised to turn off IPV6 and thought hmmmm, wasn't exactly the newest video so, let's turn it back on. Boom CA plugin loads and in firefox on UNRAID GUI I can load google again. Took a little and got my plex server and all working fine so far so I think I am good to go again! I should add, with ipv6 off and my old ISP router things were fine but I had just got a new one and... Damn thing can't even port forward properly, only opens ports but you can't remap them. Useless garbage I'll have to bridge and get a real router now. Big thanks @itimpi

OK, indeed plugging the USB into a Mac OS computer is readable. Wasn't sure about that.

WOW, I was hoping it would be that easy. Nice. OK, one thing though (I am still on first coffee here so... hahahaha) I am assuming I can't do this when it's running so This would be remove the USB and do on one of my desktops? Thanks for responding so fast! This UNRAID community is properly killer and I am looking forwards to being able to be helpful soon too. I've don a lot of Mac and PC tech support over the years.

Seems I am that person with only enough knowledge to be dangerous HAHA. I have a complete mess of a network setup. So far i only have plex & krusader installed (well I had nextcloud and a couple Dockers but only base installs and to be sure I removed them). I was playing in networking trying to solve an issue but it turned out it was an issue with new router from ISP. Long story but I have a plex server that can connect to some of my LAN devices but not all and a few WAN devices but not most. Worse is I can even load the Community Applications plugin now. Could someone point me to a write up on a base network config for UNRAID 6.12.4 I can go back to? Or is there a file maybe I can delete, reboot and have it rebuild in its default settings again? I have tried searching a bit but so many threads sound like they will have the info I'm looking for then go off into things i've never heard of in all my years of tech geekery. Thanks for reading and for any help. Hopefully soon this big ole box will be running nextcloud and much more. I have included a diagnostics file as well, just in case it helps. Can't hurt right. CA-Logging-20230930-0942.zip

Network seems to be the deal for sure as it also turns out the torrent client can't connect either.

OK, here you go. Seems things might be getting worse as I can't seem to reliably access plex server on my LAN now. Wondering if I have a failing USB stick maybe. it is a new sandisk cruzer but still. I am tempted to start over with the server as I hadn't even setup nextcloud and all. Just have to figure out how to NOT have any data messed up. But if it is fixable... CA-Logging-20230930-0942.zip

Well damn I can't fault that kinda thinking then... Well said. I am somewhat advanced in computer usage, compared to most that is but the whole unraid thing is very new to me. I have WAN access to my plex library so the server itself is online. Docker system eh, would something like a network issue do that? few days ago I plugged in a second ethernet as i'm running an older HP dual xeon workstation as my box. BUT, then I was in the network settings after a few beers and honestly i'm not 100% I got it all fixed and correctly working. I went back to one interface in use and set everything from bridged and all to no. Also have fixed ip and dns proper. Thanks for fast response, very cool.

Thanks SpencerJ. Here they are tower-diagnostics-20230929-1118.zip

What diagnostics am I to upload? from where in unraid or CA? CA-log.txt? or ca-Logging-xxxxxxxx?

Is this really the only support option for community applications plugin? One massive clusterfudge of a thread? Oh well, here goes then. Out of the blue community applications won't load, unless the array is stopped. if the array is running I get that same error lots of others have gotten about not connecting and setting dns and all. I am using the same dns most of us all are and have tried the google 8's as well. Thing is my plex server is on the internet just fine and working great so this isnt a case of my server having issues as I can tell, it's the plugin itself. Anyone have any ideas? I see people in the threads asking for logs a lot so if you ask me that please be specific as I am very new to UNRAID. Thanks in advance for any and all help.

That thread is over 166 pages in length. What help can be found in that mess for someone new to forums or unraid. There has to be a better way.

Thanks for that. No idea why it changed but that did it for me.