bohaman

Hello, thank you so much for your time. I believe this fixed it. I got range from 100-220MB now.

Hello, As the title says, for some reason my array speed is maxing out around 75-80 MB/s. At first, I thought it was a SATA bottleneck (as someone suggested), so I switched to a new HBA controller. Initially, it seemed I was getting about 240 MB/s, but after updating Unraid, my speed dropped back down to roughly 75 MB/s. I originally thought the Mover was slow because it was handling smaller files. However, when I configured a folder to write directly to the array and transferred a single large file, I was still stuck at around 75 MB/s. I am attaching the diagnostic logs captured while the Mover was running and during the large file transfer. I hope someone can point me in the right direction. tower-diagnostics-20251223-1311.ziptower-diagnostics-20251223-0934.zip Thank you for your time.

Would someone please help me troubleshoot my VM windows 11 when I passthrough second nvme it froze at unraid logo screen and one of the P core is stuck at 100 percent? Attached is my diagnostic file. Thank you for your time tower-diagnostics-20251112-2201.zip

I’m currently using the Kinivo BTD-400 Bluetooth dongle for my Windows 11 passthrough. It’s able to scan for other Bluetooth devices (e.g., my Sony TV). However, I can’t get it to recognize my Logitech Lift for Mac Bluetooth mouse. Does anyone have recommendations for a good Bluetooth dongle that can reliably connect to a Bluetooth mouse? I have an ASUS W680 ACE IPMI motherboard with built-in Bluetooth, but it only has one USB controller, and since I’m using that for my flash drive, I can’t pass through the onboard Bluetooth from the motherboard. Thank you for reading and for any recommendations!

sorry if anyone is still here. with the new update unraid 7.2 have implemented these fix. However, my cpu i5 12600k just trying to run my vm windows 11 but my cpu usage is still really high. I have passthrouh nvme drive and rtx 4060ti but my computer is still realy laggy. May I ask if there would be a fix for it? Thank you for your time. attached is my diagnotic. tower-diagnostics-20251109-1814.zip

May I ask which guide do you use to get your vm windows passthrough? I can't seem to get good performance for my vm. my cpu in vm constanly running at 80 to 90 percent and it is very laggy. Thank you for your time.

May I ask if getting passthrough via unassigned vs actual passthrouh in the setting tab are the same? Than you for your time.

I had a bit of hiccup migrating to new server. However, I'm currently running into another issues where my docker app are not showing up. I had to replaced my cached drive but everything rebuild and no error. I'm not sure what can I do so that my old docker can show up? I tried to change the directory to my cahced drive but it didn't help. Thank you for your time tower-diagnostics-20251109-1223.zip

Hello, Thank you so much for your suggestion. I think I got pretty full speed for my parity drive now I think around 240MB/s. As for my usb drive. I tried a different port, and booted up it seems to working fine now. However, my parity drive was completed now it started again. may I ask if that is normal? Attached is my diagnostic. Thank you again for your time and your help. tower-diagnostics-20251108-1122.zip

Thank you for your time. I do have a LSI card and minisas on my motherboard. I will try to use those connections. However, I'm running into another problem. Suddently my usb drive saying that it is currently offline attached is the diagnostic. Is it safe for me to continue with the parity check shutdown and get a new usb drive? Thank you for your time. tower-diagnostics-20251107-2117.zip

artach is thr diagnostics files. please let me know if you need anyrhing else. tower-diagnostics-20251107-0715.zip

I apologize, please let me know if I need to create a separate post. May I ask if there’s a way for me to improve my drive speed ? It is currently rebuilding the array due to the new disk I added but my two parity drive avg is only around 70MB/s. Do I need to do any setting to get it going a little faster? Per above specs my drive is the WD ultra star 7200 so they should be around 200MBs but I only avg around 70-79MB/s. Thank you for your time

Hello, Just a quick update on my situation. I didn't want to but I did have to purchased some new drives and they worked. I'm not sure what I did that caused dead to the other drives. May I ask what can I do in the future to prevent this from happening? Thank you for all of your help.

Hello, Thank you for your help. Below is a detailed breakdown of my setup and the steps I took when moving my drives: Original System Setup Parity Drives: 2 × 16 TB WD (connected directly to motherboard via SATA) Data Drives: 1 × 16 TB WD 2 × 3 TB Hitachi (all connected to motherboard SATA ports) Shucked Drives: 3 × 16 TB WD (using SATA adapters) Cache Drives: 1 × 4 TB Samsung SSD (main cache) 1 × 4 TB HDD (backup cache) All drives were functioning correctly on the old system. Transfer Process Stopped all Dockers and VMs before shutdown. Verified no passthrough configurations were in use. Powered down the system completely. Transferred all drives to the new machine. New System Setup Motherboard SATA Ports: 1 × 4 TB Samsung SSD (cache) 1 × 4 TB HDD (backup cache) PCIe SATA Card: 3 × 16 TB WD (shucked, connected via adapters) 2 × 3 TB Hitachi Additional Storage (for virtualization): 2 × NVMe drives (2 TB + 4 TB) 2 × SATA SSDs (2 TB each) Current Issue When I power on the new system, Unraid only recognizes the following drives: 3 × 16 TB WD 2 × NVMe drives 1 × 4 TB Samsung SSD The other drives (2 × 3 TB Hitachi and 1 × 4 TB HDD cache backup) are not detected, even though they spin up. Please let me know what additional information or diagnostics you’d like me to provide to help troubleshoot this issue. Thank you for your time and assistance.

Hello I tried to connect the drive to my other pc but nothing show up like it is not there. I tried to plug it to my mac and initialized it only show about 104MB with this ASMT109x - Config Media Is my drives dead? I made sure to follow steps and turn off before I transffer my drives over to my new build

Right, when I checked my bios all the sata port said it empty. I did tried to plug in my pc but nothing show up. However if I tried to plug in my Mac it does ask me to initialize the drive. I hope nothing wrong with the drive

Hello, Thank you for your response. The BIOS is currently not recognizing any of my drives. Initially, only my SSD was detected. I tried using different SATA power cables for my three HDDs (two parity and one data drive). They were recognized in Unraid but not in the BIOS. I’ve swapped multiple SATA data and power cables, but the other drives still won’t connect, even though they appear to be spinning. The three drives that were recognized are shucked drives, while the others are not. I also tested the same cables that worked with the shucked drives, but that didn’t help—the shucked drives continue to be detected, while the others are not. I’ve been troubleshooting this all day without success. Do you have any suggestions or steps I could try next? Thank you for your time and help.

Good morning, I apolgoize for another problem. I recently just did a new build and transfer all my hdd to my new motherboard asus w680 ace. However, unraid couldn't recognize my hdd except for my samsung drive. I connected it all the same but for some reason it just recognize only one. I am attaching the diagnostic as well. Thank you for your time. I hope someone can help guide me to the right direction. tower-diagnostics-20251103-1351.zip

Hello, I apologize I'm not sure if I am doing anything wrong. However, with the latest update for some reason my X540 NIC wouldn't work with 10gbit if I negate it down to 1 gbit I get connection. I hope someone could help guide me to the right direction. Thank you for your time

For some reason my unraid suddenly give me full log file 100 percent. I am attaching the diagnostic file. Would someone please kind to help me figure out what might go wrong with my server? Thank you so much for your time tower-diagnostics-20251029-2011.zip

I will give it a try. THank you for your suggestion

I apologize I think I had mover logging enabled so it may not be annonymous. Please let me know if i need to remove anything for privacy. Thank you for your help

I'm new to Unraid and hope if someone can help me troubleshoot this problem. I have an Array, and two SSD cache drives. When I transfer files from my PC to unraid the files stay at cache drive then at 3am I have schedule it move to my Array. My current network is 10GB/s. My speed when transfer into unraid is good and constant thanks to the cache drives. However, when I transfer my files from unraid to my PC a certain files and certain folders have really slow speed I'm talking about 20MBs instead of regular 200-280MBs. Even the files within the same folders somes have really slow speed transfer. I've checked and those files are currently storing in the same disk of the array. I'm not sure if I have set up something wrong and I hope someone could help me out. Thank you for reading.

Hello, Sorry for the late reply. I actually tried your suggestion and plugged in a different samsung 128gb usb flash drive and it worked. For some reason my samsung T7 doesn't recognized when plugged in to the 3.1 10gbs port. The other samsung flashdrive 128gb worked in USB 3.1 10gbs port. Do you think it maybe because of the cable I used? With the same motherboard when I run under windows OS it recognized so I don't think its the cable problem. My current mainboard is X99-E WS/USB 3.1 Thank you for your time in reading my post. Please let me know if you need any additional information.

Hello, when I plugged my USB drive to my USB 3.1 port unraid doesn't recognize the drive. but if I plugged it in my USB 3.0 or USB 2.0 unraid recognize the disk fine. Does any body have similar problem?