xman111
-
Posts
316 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by xman111
-
-
thanks Johnnie, I did reboot after i got the error, not sure if that cleared it out. i noticed a bunch of CRC errors to some of my hard drives but i had the cables zap strapped together and read that was a problem so i untied them.
-
ok, was able to VPN into my sons computer and grab it.. could anyone let me know if anything stands out? just built this server yesterday.
-
just at work, trying to figure out how to get it from home
-
Hey guys, just built an i5-8400 16gb server. Was able to transfer over all my data and rebuild parity. When i looked at it in the morning, it said unhealthy status in red under the notifications. How do I go about figuring out the problem? I know i had a disk or 2 that gave some errors before but I acknowledged it and haven't seen it again, i have since changed all the SATA cables. Anyone able to help me figure out if I have some disk problems or something else. Will buy a few disks to make it right if i have to.
-
Hey guys quick question. I have an Unraid server with an i5 4570k CPU in it. I just bought an i5-8400, a Z370 MB and 16GB of DDR4 ram. My main computer is the same except a i5-7600k Z270.
I was planning on putting the newer 8400 into the unraid but started thinking I may not. Is there a reason to use the 8400 with 6 processors in the Unraid? or should i upgrade my computer and put the older i5-7600k into the unraid instead?
My main uses for Unraid is one Windows 10 VM to record 4 cameras onto an unassigned 3TB drive with Blue Iris, and Plex Media Server.
-
that's great to know. i just hope i don't fuxx it up if the network is down wife and kids go bananas..
-
thanks ijuarez, i will go through step by step and make sure my settings are right. i did this when it came out quite a while ago and my side probably (obviously) needs a little tweaking. Thanks for the link man!
-
Ijuarez, sorry buddy, i didn't answer your questions. oh and yes AirVPN is the best
VLAN 10 is my management lan as well. I am not forcing all the traffic through the VPN, only if it is connected to VLAN 40 which is AirVPN LAN or VLAN 60 which is a wireless version of AIRVPN.
I also have the 10 Network as an untagged network, i was told to set it up that way on the PFsense forum. All my switches are setup using VLANS. Here is a screen shot of the one in my bedroom. See how port 10 is the trunk port that carries all my VLANs to my bedroom. Port 8 and 9 are for cameras. Port 2 is if I want to connect to AIRVPN, and the rest are my regular LAN.
i don't think i used the exact same guide as you, i used the one from the AirVPN forum here:
https://airvpn.org/topic/17444-how-to-set-up-pfsense-23-for-airvpn/
BTW, it is so nice to always be able to reach the GUI now, so happy.
-
hey, thanks for that info.. this is my task today, fix the VPN. Really appreciate that Ijuarez, since we have similar setups. I really realize i may be in over my head a little with the networking
-
thanks Ken-Ji, will look into that, think I will set it to static so I can control it. thanks so much for your help.
-
haha, it's 2:30 am here in Vancouver. you have a wonderful day, hopefully somebody might learn something from this thread, i know I sure did.. thanks a lot bonienl
-
i will play around and find a work around. right now to me, unraid is more important than my VPN as i have all my new computer stuff coming in the next couple days. Thanks again for staying up and working through this with me, i would have NEVER been able to figure that out. you're a rock star!!
-
here is a picture of my pfsense general settings. i deleted the 10.4.0.1 out of the general DNS setting and now Unraid works but my VPN doesn't. And yes, all the VLANS are separate in pfsense and the switches. I tried putting back the 10.4.0.1 in the DNS setting and dropping down the list and picking AirVPN Wan but that didn't work. I am stoked though at least I know now where the problem was.. i was about ready to give up on unraid and throw the computer out the window.
-
here it is again.. i just switched Unraid back to automatically instead of static. here is with the static ip set.
# Generated settings:
IFNAME[0]="br0"
BRNAME[0]="br0"
BRSTP[0]="no"
BRFD[0]="0"
BRNICS[0]="eth0"
PROTOCOL[0]="ipv4"
USE_DHCP[0]="yes"
DHCP_KEEPRESOLV="yes"
DNS_SERVER1="8.8.8.8"
DNS_SERVER2="8.8.4.4"
USE_DHCP6[0]="yes"
DHCP6_KEEPRESOLV="no"
SYSNICS="1" -
here is my network config file..
# Generated settings:
IFNAME[0]="br0"
BRNAME[0]="br0"
BRSTP[0]="no"
BRFD[0]="0"
BRNICS[0]="eth0"
PROTOCOL[0]="ipv4"
USE_DHCP[0]="yes"
DHCP_KEEPRESOLV="yes"
DNS_SERVER1="54.187.61.200"
USE_DHCP6[0]="yes"
DHCP6_KEEPRESOLV="no"
SYSNICS="1" -
ya it broke my DNS for my VPN network but maybe I can find a workaround. there must be another way. I can't thank you enough for figuring this out for me.. I have been driving my wife and kids nuts. hopefully this will fix the webgui issue as well.
for sure i will grab show the file.. that would be even better.
-
hey, in pfsense, under the general settings, that 10.4 number was there. I deleted it and now unraid takes the DNS number that i put in there. the only problem is i may have broken my VPN settings on my VPN network, i won't know until i can test it.
-
would that DNS make it so i couldn't get to the web gui as well? i know it wouldn't be able to resolve internet names.
-
-
I tried setting them statically in unraid to other DNS but it keeps wanting to take the VPN dns..
-
at least you found the problem, thanks man.. I just need to figure a way around it.
-
-
ya, sorry that is the DNS server from my VPN provider. It shouldn't get those. i do have unraid set to get static dns 8.8.8.8 and 8.8.4.4.
-
sorry, edited my post! I think that is the problem, that is from my VPN provider. It shouldn't get that unless it is going through the tunnel on vlan 40 i think, that is weird.
New Server Unhealthy status
in General Support
Posted
hey Johnnie, thanks for the response man.. So in your opinion, my hard drives are all fine? I am building a backup unraid server with my Plus licence, if there were 2 drives to replace, are two any worse than others?