crizz1111

yeah got no issues seeing all the SATA SSD's plugged into the H730P mini in unraid EDIT: hmm that pcie in slot21 was saying 1.6TB earlier.....

Has anyone managed to get one of these working in unraid before please? I cant see any of the drives plugged into it. thanks.

Would like some opinions on how i should put two new 10TB Ironwolf's to use. I am currently running 1x 10TB Ironwolf as my parity drive. I have several other 10TB's as data drives. Currently have about 7TB of free space left in the Array. Would like opinions on wether i should use 1 of the new drives for Parity 2 and 1 for data or should i just put both of the new drives into the data array? thanks.

yes port 1 is desktop pc with a Dell Intel X550-T2 card in it.

Port 3 in the below screen grab is my unraid server with a TP-Link TX201 in it. Maybe the driver for this card in linux does not support flow control?

does the second highlight mean i cant have flow control on, on any of my NIC's?

in a test setup i am pulling the data from a sata 2.5" SSD in the windows desktop and writing to the unraid device pool that consists of 1 sata 2.5" ssd for parity and 1 sata ssd for data.

Hi all, does anyone here have 2.5Gbe working well in unraid? I have 2.5G Nic's and 2.5G switch. When i copy a file from desktop box with a 2.5G nic over to the unraid server that also has a 2.5G nic the file transfer starts off fast at ~280MB/s but then quickly plumits down to ~60MB/s. What settings am i missing to have this file transfer stay closer to the ~280MB/s and remain at that speed for the entire transfer? thank you

I have two of these cards. 1 in a windows box and one in my unraid server. I am trying to copy a large file from the windows box to the unraid server. It starts off fine copying fast but soon plumits down to just below 1Gb speed. I have turned on flow control on the windows box for this NiC and also on both switch ports (managed switch). I can't see anywhere in unraid to turn flow control on though. I have installed "Tips and Tweaks" plugin but this does not seem to be able to turn flow control on for the TX201 in the unraid box. Is flow control for this card not supported in the linux driver as it is in windows driver? thanks.