clowrym

Are you happen to run the apcupsd plugin ? You might want to have a look at http://lime-technology.com/forum/index.php?topic=29605.0 No, only running the the dynamic plugin set, plex and SSH. I have only installed 6 of the dynamic plugins, Web Gui, Disk health, system info, system stats, system temp & plugin control

It doesn't seem to have an IP that I can find.....I bought it off ebay, so my main concern is how it is set up already... and then to be able to play around with bonding etc!! I did pick-up and USB-Serial, but haven't connected it yet!!

I have a dell power edge 6024 Managed switch that I use for my home network. It has a web based management system but it needs to be activated before I can use it. The problem is that I don't have anything with a serial port (with the exception of my unraid server) to connect to it with. Is it possible to connect it to the port on my Unraid server to do the management?

I have a small bug....or it could be my computer not sure.... When I have stats set to show one graph per line, if I scroll down to look at the bottom graph, every time the graph refreshes it scrolls back to the top automatically. It only seems to do this on Safari on my mac, Chrome works great!

The first post in this thread it quite informative, If you don't have a cache drive, then create a separate share just for pled and change the "/mnt/cache/appdata/plex/Library" portion of the screenshot to the "/mnt/user/yourshare/appdata/plex/Library" . Temp should be "/mnt/user/yourshare/plextemp" If you have a cache drive, leave it exactly as they have it shown. Don't install the plex updater at this point, I have read it doesn't work at the moment as it hasn't been modified to point to the new locations of the files. http://forums.plexapp.com/index.php/topic/42513-0963-for-unraid/

Seems to be working Great!! I have had no issues with lost ethernet stats. I didn't have the issue with the disks, so I can't comment! I have one question regarding Dual Processor systems, Does the Stats page show the average of both combined, Or just the first proc? Is it possible to have a separate graph for each?

so here's my output after running sensors-detect Driver `to-be-written': * ISA bus, address 0xca2 Chip `IPMI BMC KCS' (confidence: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) Driver `w83793': * Bus `SMBus I801 adapter at 1100' Busdriver `i2c_i801', I2C address 0x2f Chip `Winbond W83793R/G' (confidence: Driver `w83627hf': * ISA bus, address 0x295 Chip `Winbond W83627HF/F/HG/G Super IO Sensors' (confidence: 9) Driver `i5k_amb': * Chip `Intel AMB FB-DIMM thermal sensor' (confidence: 9) Note: there is no driver for IPMI BMC KCS yet. Check http://www.lm-sensors.org/wiki/Devices for updates. Warning: the required module w83793 is not currently installed on your system. If it is built into the kernel then it's OK. Otherwise, check http://www.lm-sensors.org/wiki/Devices for driver availability. Warning: the required module i5k_amb is not currently installed on your system. If it is built into the kernel then it's OK. Otherwise, check http://www.lm-sensors.org/wiki/Devices for driver availability. Do you want to generate /etc/sysconfig/lm_sensors? (yes/NO): no To load everything that is needed, add this to one of the system initialization scripts (e.g. /etc/rc.d/rc.local): #----cut here---- # Chip drivers modprobe coretemp modprobe w83627hf /usr/bin/sensors -s #----cut here---- and once modprob W83627hf is added: root@Tower:/mnt/cache/appdata# sensors coretemp-isa-0000 Adapter: ISA adapter Core 0: +52.0 C (high = +82.0 C, crit = +100.0 C) Core 1: +60.0 C (high = +82.0 C, crit = +100.0 C) Core 2: +45.0 C (high = +82.0 C, crit = +100.0 C) Core 3: +62.0 C (high = +82.0 C, crit = +100.0 C) coretemp-isa-0001 Adapter: ISA adapter Core 0: +63.0 C (high = +82.0 C, crit = +100.0 C) Core 1: +63.0 C (high = +82.0 C, crit = +100.0 C) Core 2: +63.0 C (high = +82.0 C, crit = +100.0 C) Core 3: +60.0 C (high = +82.0 C, crit = +100.0 C) w83627hf-isa-0290 Adapter: ISA adapter in0: +4.08 V (min = +0.00 V, max = +4.08 V) in1: +4.08 V (min = +0.00 V, max = +4.08 V) in2: +4.08 V (min = +2.82 V, max = +3.79 V) ALARM in3: +3.04 V (min = +4.06 V, max = +2.03 V) ALARM in4: +3.14 V (min = +4.08 V, max = +4.08 V) ALARM in5: +3.17 V (min = +3.76 V, max = +2.54 V) ALARM in6: +3.20 V (min = +4.08 V, max = +4.08 V) ALARM in7: +3.36 V (min = +4.08 V, max = +3.92 V) ALARM in8: +3.18 V (min = +4.08 V, max = +3.57 V) ALARM fan1: 0 RPM (min = 0 RPM, div = 2) fan2: 0 RPM (min = 0 RPM, div = 2) fan3: 0 RPM (min = 0 RPM, div = 2) temp1: -48.0 C (high = +75.0 C, hyst = +70.0 C) sensor = thermistor temp2: -48.0 C (high = +80.0 C, hyst = +75.0 C) sensor = thermistor temp3: -48.0 C (high = +80.0 C, hyst = +75.0 C) sensor = thermistor cpu0_vid: +1.419 V beep_enable: enabled

I have a bit of an issue with the System temp set up, went through the wiki to add the drivers etc, but my sensors output (w83627ehf) for temp 1 & 2 both read -48C.... Not sure why this is, but if I use the temp1 & temp2 its kind of a waste of time... With Dual chips, I also get coretemp-ISA-0001 & 0002 consisting of a separate temp for each or the 4 cores of the quad core chips. I have yet to figure out how to get this working with the MB / CPU coretemp-isa-0000 Adapter: ISA adapter Core 0: +38.0 C (high = +82.0 C, crit = +100.0 C) Core 1: +50.0 C (high = +82.0 C, crit = +100.0 C) Core 2: +42.0 C (high = +82.0 C, crit = +100.0 C) Core 3: +53.0 C (high = +82.0 C, crit = +100.0 C) coretemp-isa-0001 Adapter: ISA adapter Core 0: +53.0 C (high = +82.0 C, crit = +100.0 C) Core 1: +53.0 C (high = +82.0 C, crit = +100.0 C) Core 2: +51.0 C (high = +82.0 C, crit = +100.0 C) Core 3: +49.0 C (high = +82.0 C, crit = +100.0 C) I will post the further output with the w83627 chip added once I get home this evening, as i didnt bother with further adding the temp's due to the output

Attached Mine as well incase it helps.... sadf_d_-n_output.txt

Can you post a screenshot ... I'll Post once I get home tonight!!

It seems I have started loosing my network stats after a a couple hours of use....graph just sits at zero & can't seem to get them to return unless I reboot unraid. Looked through the logs and it seems there is nothing there....