Zeppi

Nevermind.. I used the device name nvme0n1p1 and all the appdata files are in the temp folder. Gonna install the new drive now. Thanks!!

Sorry just got around to trying to fix this now. Ran the memtest and 1x16gb stick of ram was fried. Gonna run with only one stick for now and buy a second later. Trying to follow the instruction you gave regarding recovery of the unmountable drive. I don't follow this line For a single device: replace X with actual device, don't forget the 1 in the end, e.g., /dev/sdf1 What am I replacing the X with in my situation? Sorry if it's obvious. I'm just learning this stuff now .

Had a power outage today and now my NVMe cache drive is unmountable. All app data is on this NVMe drive and now can't access docker. Diagnostic below. zeppilab-diagnostics-20240621-2251.zip

Looks like HBA was toast. Syncing parity at 230MB/sec now... Tremendous

I ran 2 drives without a parity just so I can get some dockers in and run diskspeed or other diagnostic apps. Now I discovered another problem lol. Everytime I reboot the server I get an unsupported drive error on the 2 spinning disks but not my nvme. Gonna try skipping my HBA and plug sata directly into motherboard to see if my HBA is the problem. Can I run unraid strictly off the motherboard or is an HBA a must? I know if I want more drives I'll have to go the HBA route; but just to get me up and running with my 3 disks is motherboard an option?

Here's a diagnostic I just pulled. I did hear activity from the HDD's as soon as I powered the system and even before booting into unRaid to try and start the array again. zeppilab-diagnostics-20231118-0806.zip

Hello, Just setup my first diy NAS. Going through the drive/parity setup and I'm getting 15-20MB/sec speed. Estimated time of 4 days to sync my parity. I'm new to all this so hoping I can get some community help. See my diagnostic attached. zeppilab-diagnostics-20231118-0126.zip

I'm getting the same error. I don't know what you did to fix this. How do I mount/boot into support Enviro and disable the maxcache? So frustrated