Houmi

Yeah it's set to custom : wg0 , and wg0 is active in VPM as I can do "wg show" and I can ping the VPS and back (10.10.92.1 & 10.10.92.2) -- maybe it's because I am using a VPS and not a commercial VPN.

@nekromantik, were you ever able to use the docker container to use wg0 ?

@Zxurian, How do you have other docker containers use wg0 ? When I do this they don't seem to work / connect to the network ?

I recently got a hold of a VPS and set up Wireguard between my unraid server + VPS via "Remote Tunneled access" of built-in VPN Manager, however if I choose any Docker container to use the wg0 interface, I can't go to its WebUI. Is there anything else to be configured ? Do I have to set up a reverse proxy ? I tested this by having the FireFox docker container use wg0 but it never starts for example. I can ping the Wireguard IPs from each location (Unraid <-> VPS) just fine... i.e. 10.10.92.0/32 Ultimately I'd like this setup to be used for Plex Remote Access as well as using wg0 for other docker containers.

I figured these things on my own... 1: nvm 2: took like 1day 10 hours 3: Fans were loud because they were set to DC not PWM in Bios 4: Cache is using 2 Drives NVME + SSD in Raid 1 but have one question I can't figure out: My only question is that I moved my Plex server data files from Windows %LOCALAPPDATA% to appdata/PMS in Cache, but where are the Plex Server Docker files installed ? Is there a way to use my extra 1TB SSD that is in the Array to host all the docker images ? Note that when I created the Media Share in the Array to store Video files, I chose all disks minus the 1TB SSD, so the latter is available... Thanks for any suggestions, help.

Hi Everyone, I decided to turn my old Gaming PC to an Unraid Server, I had read so many good reviews that I bought the unlimited license w/o trial. The PC is an old i7-6700k PC with 32GB of Ram. The Drives are : 512gb Samsung NVME Boot 2 Samsung SSD (512gb & 1TB) 5 * 8TB Seagate Ironwolf 2 * 14TB Seagate Exos Mach 2 Since my PC didn't have enough SATA ports, I got a PCIe Sata Card and connected all SATA drives to it, it is booting fine though weird flickrs during boot I put the NVME and the 512gb SSD as Cache Pool 1 14TB drive as Parity Drive Rest are in the Array including the 1TB SSD which I plan on using for Plex apps and such The goal of this setup is to transfer my Plex Server, and also store DVR recordings, VPN server and possibly a Pihole (though currently using NextDNS) Now to the questions (I did research some on Forum to unblock myself) but still some left. The Sandisk Cruzer USB Flash wasn't available during installer method, so I used the manual method, are Sandisks not supported, should I use a different Flash (if so is it possible to transfer the content) ? I chose the EFI boot and it works, any advantage to use this as opposed to regular (Legacy) for this Flash drive ? Does it matter if the USB is booted in 2.0 or 3.0 ? When the Parity Sync is happening, It should take about 1 day & 10 hours, is this normal ? Are Parity Checks this long as well ? During Parity Sync the Fans on the PC go really loud (new Noctua fans), I didn't see much CPU utilization and afaik the fans were set to silent in Bios, just curious if others had similar issues and what remedy they choose. I hope they are more silent during regular operations The Cache Pool has an NVME and SSD (each 512GB), would it be possible to Mirror them or not possible since they are different types ? If they are separate, would Unraid use both ? Thanks!