thatja

I've installed this, I've managed to get into the server on the game however when I try and connect to the rcon via port 28017 as stated in the Rust template, I get a cannot connect error. Is there something I'm doing wrong? All ports are forwarded in my router.

Which driver plugin?

Here are the diagnostics, i cannot get into normal UNRAID GUI mode, only safe mode works. subzero-diagnostics-20241126-0857.zip

The post above did the trick and now eth0 is correctly showing and using the realtek pcie card However, during my troubleshooting I've uncovered a somewhat alarming issue, I lot access to the server over LAN so went to use the built in GUI mode on the actual server it's self however, when doing this it just shown a blank screen with a _ in the top left, this also made the entire unraid server inaccessible on all devices over LAN (tested when I restored networking) the only way I could fix the networking was safe mode with gui (normal non gui mode functions normal). I'm wondering from the diags i posted previously, can you see why this would be happening? I've rebooted into GUI mode 5 times and all 5 times the GUI wouldn't boot and it just shows the blank screen with an underscore symbol on the top left and the server isn't accessible at all over LAN. I would really like to get this fixed Thanks!

Thanks for this, I will give this ago in a little while and report back! I really appreciate the help.

Thanks for the help I appreciate it. I am indeed running unraid 7 BETA, the latest version (4) Here are diagnostics subzero-diagnostics-20241124-2030.zip

I already had the plugin installed, this is the first thing i did when I installed the card.

root@SubZero:~# lspci -nnk | grep -A 3 8125 44:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller [10ec:8125] (rev 05) Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:0123] Kernel driver in use: r8125 Kernel modules: r8169, r8125 7f:08.0 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 QPI Link 0 [8086:3c80] (rev 07) Subsystem: Intel Corporation Device [8086:0000] 7f:09.0 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 QPI Link 1 [8086:3c90] (rev 07) AND 44:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 05) Subsystem: Realtek Semiconductor Co., Ltd. Device 0123 Flags: bus master, fast devsel, latency 0, IRQ 75, NUMA node 1, IOMMU group 10 I/O ports at cc00 [size=256] Memory at d3fe0000 (64-bit, non-prefetchable) [size=64K] Memory at d3ffc000 (64-bit, non-prefetchable) [size=16K] Expansion ROM at d3000000 [virtual] [disabled] [size=64K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [70] Express Endpoint, IntMsgNum 1 Capabilities: [b0] MSI-X: Enable+ Count=32 Masked- Capabilities: [d0] Vital Product Data Capabilities: [100] Advanced Error Reporting Capabilities: [148] Virtual Channel Capabilities: [168] Device Serial Number 01-00-00-00-68-4c-e0-00 Capabilities: [178] Transaction Processing Hints Capabilities: [204] Latency Tolerance Reporting Capabilities: [20c] L1 PM Substates Capabilities: [21c] Vendor Specific Information: ID=0002 Rev=4 Len=100 <?> Kernel driver in use: r8125 Kernel modules: r8169, r8125 Its definitely loading the driver, it just doesn't show the MAC address under interface rules so I cannot make it eth0, it shows up under eth118 in the network settings. I am wanting to make this eth0 by default.

I have just installed a new Realtek RTL8125B 2.5gb network card in my system and i can see it under ifconfig However I'm struggling to make this the default eth0 because I'm Interface rules the mac address displayed above (3a:e0:4c:68:34:51) doesn't show up I'm the list. This above is all that shows up, so I am at a loss about what to do from here. Any help is appreciated.

Nov 22 00:21:20 SubZero kernel: docker0: port 20(veth37ee186) entered disabled state Nov 22 00:21:20 SubZero rc.docker: Unraid managed containers stopped. Nov 22 00:21:20 SubZero rc.docker: Stopping network... Nov 22 00:21:20 SubZero rc.docker: Network stopped. Nov 22 00:21:20 SubZero rc.docker: Stopping Docker daemon... Nov 22 00:21:20 SubZero root: Waiting 30 seconds for Docker daemon to die. Nov 22 00:21:31 SubZero kernel: docker0: port 15(veth62a94d4) entered disabled state Nov 22 00:21:31 SubZero kernel: veth85b0dfb: renamed from eth0 Nov 22 00:21:31 SubZero kernel: br-6d43530d5125: port 1(vethdc3913c) entered disabled state Nov 22 00:21:31 SubZero kernel: veth1c212f1: renamed from eth0 Nov 22 00:21:31 SubZero kernel: docker0: port 15(veth62a94d4) entered disabled state Nov 22 00:21:31 SubZero kernel: veth62a94d4 (unregistering): left allmulticast mode Nov 22 00:21:31 SubZero kernel: veth62a94d4 (unregistering): left promiscuous mode Nov 22 00:21:31 SubZero kernel: docker0: port 15(veth62a94d4) entered disabled state Nov 22 00:21:31 SubZero kernel: br-6d43530d5125: port 1(vethdc3913c) entered disabled state Nov 22 00:21:31 SubZero kernel: vethdc3913c (unregistering): left allmulticast mode Nov 22 00:21:31 SubZero kernel: vethdc3913c (unregistering): left promiscuous mode Nov 22 00:21:31 SubZero kernel: br-6d43530d5125: port 1(vethdc3913c) entered disabled state Nov 22 00:21:38 SubZero rc.docker: ip link set docker0 down Nov 22 00:21:38 SubZero rc.docker: ip link del docker0 Nov 22 00:21:38 SubZero rc.docker: Docker daemon... Stopped. Nov 22 00:21:38 SubZero emhttpd: shcmd (596): umount --lazy /var/lib/docker Nov 22 00:21:42 SubZero kernel: BTRFS info (device loop2): last unmount of filesystem 995e2f99-8bc5-4687-918c-8120a5c172d7 Nov 22 00:21:42 SubZero unassigned.devices: Unmounting All Devices... Nov 22 00:21:42 SubZero emhttpd: shcmd (598): /etc/rc.d/rc.samba stop Nov 22 00:21:42 SubZero rc.samba: Stopping Samba server daemon... Nov 22 00:21:42 SubZero rc.samba: killall smbd nmbd wsdd2 winbindd Nov 22 00:21:42 SubZero wsdd2[864638]: 'Terminated' signal received. Nov 22 00:21:42 SubZero wsdd2[864638]: terminating. Nov 22 00:21:42 SubZero winbindd[864656]: [2024/11/22 00:21:42.906552, 0] ../../source3/winbindd/winbindd_dual.c:1980(winbindd_sig_term_handler) Nov 22 00:21:42 SubZero winbindd[864656]: Got sig[15] terminate (is_parent=1) Nov 22 00:21:43 SubZero rc.samba: Samba server daemon... Stopped. Nov 22 00:21:43 SubZero emhttpd: shcmd (599): rm -f /etc/avahi/services/smb.service Nov 22 00:21:43 SubZero emhttpd: Stopping mover... Nov 22 00:21:43 SubZero emhttpd: shcmd (601): /usr/local/sbin/mover stop Nov 22 00:21:43 SubZero root: mover: not running Nov 22 00:21:43 SubZero emhttpd: Sync filesystems... Nov 22 00:21:43 SubZero emhttpd: shcmd (602): sync Nov 22 00:21:44 SubZero rc.rsyslogd: Restarting Syslog server daemon... Nov 22 00:21:44 SubZero rc.rsyslogd: Stopping Syslog server daemon... Nov 22 00:21:44 SubZero rc.rsyslogd: killall rsyslogd Nov 22 00:21:45 SubZero rc.rsyslogd: Syslog server daemon... Started. Nov 22 00:21:45 SubZero emhttpd: shcmd (603): /usr/sbin/zfs unmount -a Nov 22 00:21:45 SubZero emhttpd: shcmd (604): umount /mnt/user0 Nov 22 00:21:46 SubZero emhttpd: shcmd (605): rmdir /mnt/user0 Nov 22 00:21:46 SubZero emhttpd: shcmd (606): umount /mnt/user Nov 22 00:21:46 SubZero emhttpd: shcmd (607): rmdir /mnt/user Nov 22 00:21:46 SubZero emhttpd: shcmd (609): rm -f /boot/config/plugins/dynamix/mover.cron Nov 22 00:21:46 SubZero emhttpd: shcmd (610): /usr/local/sbin/update_cron Nov 22 00:21:46 SubZero emhttpd: Unmounting disks... Nov 22 00:21:46 SubZero emhttpd: shcmd (611): umount /mnt/disk1 Nov 22 00:21:46 SubZero kernel: XFS (md1p1): Unmounting Filesystem c34af1e5-f30d-464d-b686-bbb21c41d31c Nov 22 00:21:46 SubZero emhttpd: shcmd (612): rmdir /mnt/disk1 Nov 22 00:21:46 SubZero emhttpd: shcmd (613): umount /mnt/disk2 Nov 22 00:21:46 SubZero kernel: XFS (md2p1): Unmounting Filesystem 967c9327-28a7-4000-99bf-2bc1a5888fd2 Nov 22 00:21:46 SubZero emhttpd: shcmd (614): rmdir /mnt/disk2 Nov 22 00:21:46 SubZero emhttpd: shcmd (615): umount /mnt/disk3 Nov 22 00:21:46 SubZero kernel: XFS (md3p1): Unmounting Filesystem a7ed2e60-e08b-4c09-9235-2898b5a29a69 Nov 22 00:21:46 SubZero emhttpd: shcmd (616): rmdir /mnt/disk3 Nov 22 00:21:46 SubZero emhttpd: shcmd (617): umount /mnt/disk4 Nov 22 00:21:46 SubZero kernel: XFS (md4p1): Unmounting Filesystem 80ec746d-7a3f-4e2b-9c57-a336559f78dc Nov 22 00:21:46 SubZero emhttpd: shcmd (618): rmdir /mnt/disk4 Nov 22 00:21:46 SubZero emhttpd: shcmd (619): umount /mnt/disk5 Nov 22 00:21:46 SubZero kernel: XFS (md5p1): Unmounting Filesystem 23daaee5-4e69-4f50-bffc-277431b123e6 Nov 22 00:21:46 SubZero rsyslogd: [origin software="rsyslogd" swVersion="8.2102.0" x-pid="1744523" x-info="https://www.rsyslog.com"] start Nov 22 00:21:46 SubZero emhttpd: shcmd (620): rmdir /mnt/disk5 Nov 22 00:21:46 SubZero emhttpd: shcmd (621): umount /mnt/disk6 Nov 22 00:21:46 SubZero kernel: XFS (md6p1): Unmounting Filesystem bc90d98f-6a4a-48e5-a057-7ab08804f8e1 Nov 22 00:21:46 SubZero emhttpd: shcmd (622): rmdir /mnt/disk6 Nov 22 00:21:46 SubZero emhttpd: shcmd (623): umount /mnt/disk7 Nov 22 00:21:46 SubZero kernel: XFS (md7p1): Unmounting Filesystem 9c91f4ba-42f8-45a4-a61c-95dcaace3411 Nov 22 00:21:47 SubZero emhttpd: shcmd (624): rmdir /mnt/disk7 Nov 22 00:21:47 SubZero emhttpd: shcmd (625): umount /mnt/nvme Nov 22 00:21:47 SubZero root: umount: /mnt/nvme: target is busy. Nov 22 00:21:47 SubZero emhttpd: shcmd (625): exit status: 32 Nov 22 00:21:47 SubZero emhttpd: shcmd (626): umount /mnt/nvmedl Nov 22 00:21:47 SubZero root: umount: /mnt/nvmedl: target is busy. Nov 22 00:21:47 SubZero emhttpd: shcmd (626): exit status: 32 Nov 22 00:21:47 SubZero emhttpd: shcmd (627): umount /mnt/ssd Nov 22 00:21:47 SubZero kernel: XFS (nvme1n1p1): Unmounting Filesystem e06cb963-fdca-410d-b488-3a3f059fdf09 Nov 22 00:21:47 SubZero emhttpd: shcmd (628): rmdir /mnt/ssd Nov 22 00:21:47 SubZero emhttpd: Retry unmounting disk share(s)... Nov 22 00:21:52 SubZero emhttpd: Unmounting disks... Nov 22 00:21:52 SubZero emhttpd: shcmd (629): umount /mnt/nvme Nov 22 00:21:52 SubZero root: umount: /mnt/nvme: target is busy. Nov 22 00:21:52 SubZero emhttpd: shcmd (629): exit status: 32 Nov 22 00:21:52 SubZero emhttpd: shcmd (630): umount /mnt/nvmedl Nov 22 00:21:52 SubZero root: umount: /mnt/nvmedl: target is busy. Nov 22 00:21:52 SubZero emhttpd: shcmd (630): exit status: 32 Nov 22 00:21:52 SubZero emhttpd: Retry unmounting disk share(s)... Nov 22 00:21:57 SubZero emhttpd: Unmounting disks... Nov 22 00:21:57 SubZero emhttpd: shcmd (631): umount /mnt/nvme Nov 22 00:21:57 SubZero root: umount: /mnt/nvme: target is busy. Nov 22 00:21:57 SubZero emhttpd: shcmd (631): exit status: 32 Nov 22 00:21:57 SubZero emhttpd: shcmd (632): umount /mnt/nvmedl Nov 22 00:21:57 SubZero root: umount: /mnt/nvmedl: target is busy. Nov 22 00:21:57 SubZero emhttpd: shcmd (632): exit status: 32 Nov 22 00:21:57 SubZero emhttpd: Retry unmounting disk share(s)... Nov 22 00:22:02 SubZero emhttpd: Unmounting disks... Nov 22 00:22:02 SubZero emhttpd: shcmd (633): umount /mnt/nvme Nov 22 00:22:02 SubZero root: umount: /mnt/nvme: target is busy. Nov 22 00:22:02 SubZero emhttpd: shcmd (633): exit status: 32 Nov 22 00:22:02 SubZero emhttpd: shcmd (634): umount /mnt/nvmedl Nov 22 00:22:02 SubZero root: umount: /mnt/nvmedl: target is busy. Nov 22 00:22:02 SubZero emhttpd: shcmd (634): exit status: 32 Nov 22 00:22:02 SubZero emhttpd: Retry unmounting disk share(s).. How can I stop this happening? I have unmounted all my rclone instances, shutdown all my docker containers but I still end up having to push the power button because of the above happening. Is there anyway I can avoid doing an unclean shutdown in this scenario in future?

I am still facing this issue however I have moved away from mergerfs so I can rule out that as being the issue. Not sure what to try next.

Whenever I want to restart my server it always does an unclean shutdown and its getting a little irritating. It seems to stick on "/mnt/nvme target is busy." However, I have no dockers running, or VM's so im not sure what exactly is busy on those drives. Its just an endless loop of the same message. exit status: 32. I'm not sure if diagnostics can pinpoint whats stopping it, but here they are. Any help is appreciated! subzero-diagnostics-20241006-0047.zip

I use a program which has previously worked on unraid 6, but since moving to unraid 7 it no longer works with the following errors; WARNING: pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available. WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/beautifulsoup4/ WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/beautifulsoup4/ WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/beautifulsoup4/ WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/beautifulsoup4/ WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/beautifulsoup4/ Could not fetch URL https://pypi.org/simple/beautifulsoup4/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/beautifulsoup4/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping ERROR: Could not find a version that satisfies the requirement beautifulsoup4==4.12.2 (from versions: none) ERROR: No matching distribution found for beautifulsoup4==4.12.2 WARNING: pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available. Could not fetch URL https://pypi.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/pip/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping Could anyone help me with this?

I understand you are the maintainer for mergerfs for UNRAID? Apologies if not. I am still getting this issue, though nearly not as much as I was before, however I am wondering if there is a way I can improve the performance of my setup and, I acknowledge ahead of time that my setup is rather niche and unique in a sense that its not something you would come across often. Because of this I'll give you a small rundown of what's what. /mnt/user/plexdata/ - This is my share for my Array on UNRAID (local) /mnt/nvmedl/plexified/mounts/moviesrc - This is my movies source that is a combination of folders on Google Drive mounted via Rclone /mnt/nvmedl/plexified/mounts/google/Data - This is my main Google Drive folder that is mounted via Rclone and where most of my files are located. /mnt/nvmedl/plexified/mounts/secret/ - This is the end product with all 3 of the above merged together using Mergefs. The command I am using for this is; mergerfs -o defaults,allow_other,statfs_ignore=nc,use_ino,category.create=ff,fsname=mergerFS /mnt/user/plexdata/:/mnt/nvmedl/plexified/mounts/moviesrc=NC:/mnt/nvmedl/plexified/mounts/google/Data=NC /mnt/nvmedl/plexified/mounts/secret/ and my Rclone mount is: rclone mount --config=/mnt/nvme/plexified/mounts/rclone/rclone.conf --allow-other --no-traverse --vfs-cache-mode full --cache-dir /mnt/nvmedl/plexified/mounts/googlecache/ --vfs-cache-max-size 250G --dir-cache-time 96h --vfs-fast-fingerprint --vfs-refresh --drive-impersonate [email protected] googledecrypted: /mnt/nvmedl/plexified/mounts/google/ I then use Sonarr which via instructions from Mergerfs to import all new files to the Array folder, and my config in Sonarr docker to forward the folder in a way that my Plex server can read from an old bare metal install as below: (Plex also has this same container/host path setup) Now, Sonarr and Radarr also use this location, and I use this to manage my files however I have noticed that importing is rather slow to do, I am wondering if there is anything in my setup that could be improved that would make my import performance faster, and I also wonder if this is what contributes to the way my server hangs and then ultimately crashes. Any input is very greatly appreciated and I look forward to reading your reply.

The problem with this is my setup doesn't work without mergerfs so it wouldn't be a good test

Yeah, and why would the entire /mnt become unaccessible? I wonder if @JorgeB can shed any light on this.

But then if it was mergerfs, i would expect unmounting them would bring the server back to "life" but it doesn't. I have to do a full reboot.

I am 99.9% sure its to do with mergerfs though, it only happened when scanning in a very large Music library which is mounted with mergerfs

Server crashed around 21:00-21:15ish

I don't think this is complete, but its all I could get plexified-diagnostics-20240531-2110.zip

Diagnostics is stuck on this stage

Yes and there was no error for almost 24 hours

/mnt is completely inaccessible aswel

Getting Diagnostics through the Ui also freezes And also trying to get them via "diagnostics" inside ssh also just hangs