mekelly

JorgeB, that worked, thanks! I think the problem was that both drives had been used as a ZFS mirror and while I was deleting the pool, I never erased it. That seemed to do the trick. Thanks again!

I am running Unraid 7 and just want to try different pool configurations for testing and my own learning. I want to create a 2 HDD ZFS striped pool. I understand there's no fault tolerance and won't be putting any important data on it. Just want to do some benchmarking. Every time I try to create a striped pool by assigning 2 slots and 2 drives, and selecting a striped pool, it defaults to a mirror pool and I can't change it. Any way to create the pool and why would the GUI not allow me to do it? Thanks in advance!!!

I was using the wrong login credentials; my protonvpn credentials instead of the openvpn generated credentials. Thanks so much for your help. It is working now but unsure how to mark it as resolved.

Found the temporary password in the log file and that allowed me to log in. Thanks again for all the help!

Also, I have the following in the qBittorrent set up screen: Key 6 (VPN_OPTIONS) - null Key 7 (STRICT_PORT_FORWARDING) - 'yes' Are those correct?

Jarare, thank you so much. I did have my protonvpn credentials entered, not my openvpn credentials. Once I changed those, the webgui comes up! However, when I try to log in to the webgui using those same openvpn credentials, it tells me I have an invalid username or password. I tried it with the exact same openvpn credentials as well as without the '+pmp' in the username. Same results. Is this a different set of credentials? What credentials do I need to enter in the qBittorrent Web UI to log in?

I typed the password in. I have a paid protonvpn account so I chose protonvpn for Key 4 and typed in my credentials.

Simple password with no special characters didn't resolve the issue. Any other ideas? Thanks!!!

The password does have special characters in it. Hoping that's not the issue, but might try changing that as well and re-testing.

Turned off 2fa for my VPN, stopped qbittorrent and restarted it. I got the same authorization failed message. Not sure what else to try at this point.

I am trying to configure this correctly but can't get the web gui to come up. I am assuming that's because it can't connect to my VPN service (I use protonvpn). I've copied the configuration file from them and set up my username and password but seeing a lot of failed authorization messages. Is that because I have 2fa enabled with proton? Is that what's preventing the container from connecting to them and therefore not allowing the gui to come up? If so, how do I remedy that as I am a paid subscriber of proton and really like their service. If that's not causing the problem, what else do I need to do get it working? Thanks so much in advance for your help!!! qbittorrent command execution.txt qbittorrent supervisor log.txt

I am trying to configure icloudpd to download my icloud photo's (and my wife's as well once I get it working). I followed DadNerd's video to help me get it configured. I am getting a permissions error (see attached log file) that I am not sure how to resolve. Any help would be appreciated! Thanks! ) icloudpd log -20240207.pdf

Thanks! Sounds easy enough.

I run a Windows 11 machine with built-in 2.5GbE networking. I am running an Unraid trial on an older motherboard with only a 1GbE network connection. The machines are currentlhy connected through a 1GbE switch. I'd like to leverage the faster connection in the Windows machine, so was thinking of buying a switch that would support 2.5GbE (and 10GbE for future proofing) and a 2.5GbE PCI card for the Unraid server. My question is, will the Unraid server recognize the new NIC card and start using it automatically or do I need to manually change config files (or other settings) to have it use the new, faster NIC?