Olivilo

Ok i have no HDD to replace and i cant find a explanation how i get with less data drives my array up again its downb and telling a drive is now missing and i cant choose option "unassigned" how do i change this to get my array of 1 hdd up again and working ?

ok i take her out and start only with the 4 Gig HDD when i Buy a big Parity HDD can i add it when my data Drives allready got data on it? Wanna buy a 8 GiG HDD when i travel to germany here in serbia the prices and tech are outdated and overpriced.

Addet it

Hello everybody, I am new to Unraid and still learning, i use a Old Miditower as Server with 2 HDs and 2 SSDs in it. Until now i didnt used a big HDD as Parity Disc but this will come. I would like to work on on this mashine and install docker and other stuff but i am not shure how bad this Error now is. It seems that of the two HDDs i used the 1,5 Gig (the older one) has some bad Secotrs, the newer one (4Gig) is ok so far. This two are my array and the 2 SSDs i got are my cache. I made last day a long SMART test and this is the Error Log from Unraid: ATA Error Count: 945 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 945 occurred at disk power-on lifetime: 34763 hours (1448 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 d1 00 ff ff ff 4f 00 04:58:01.117 READ DMA EXT 25 d1 00 ff ff ff 4f 00 04:58:01.096 READ DMA EXT 25 d1 00 ff ff ff 4f 00 04:57:55.772 READ DMA EXT 25 d1 00 ff ff ff 4f 00 04:57:55.752 READ DMA EXT 25 d1 00 ff ff ff 4f 00 04:57:50.278 READ DMA EXT Error 944 occurred at disk power-on lifetime: 34763 hours (1448 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 d1 00 ff ff ff 4f 00 04:57:36.183 READ DMA EXT 25 d1 00 ff ff ff 4f 00 04:57:36.162 READ DMA EXT 25 d1 00 ff ff ff 4f 00 04:57:30.854 READ DMA EXT 25 d1 00 ff ff ff 4f 00 04:57:30.834 READ DMA EXT 25 d1 00 ff ff ff 4f 00 04:57:25.343 READ DMA EXT Error 943 occurred at disk power-on lifetime: 34761 hours (1448 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 d1 00 ff ff ff 4f 00 03:46:39.117 READ DMA EXT 25 d1 00 ff ff ff 4f 00 03:46:39.096 READ DMA EXT 25 d1 00 ff ff ff 4f 00 03:46:38.151 READ DMA EXT 25 d1 00 ff ff ff 4f 00 03:46:38.133 READ DMA EXT 25 d1 00 ff ff ff 4f 00 03:46:33.636 READ DMA EXT Error 942 occurred at disk power-on lifetime: 34761 hours (1448 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 d1 00 ff ff ff 4f 00 03:46:14.691 READ DMA EXT 25 d1 00 ff ff ff 4f 00 03:46:14.673 READ DMA EXT 25 d1 00 ff ff ff 4f 00 03:46:10.180 READ DMA EXT 25 d1 00 ff ff ff 4f 00 03:46:10.147 READ DMA EXT b0 d1 01 01 4f c2 00 00 03:46:10.120 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] Error 941 occurred at disk power-on lifetime: 34761 hours (1448 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 d1 00 ff ff ff 4f 00 03:46:14.691 READ DMA EXT 25 d1 00 ff ff ff 4f 00 03:46:14.673 READ DMA EXT 25 d1 00 ff ff ff 4f 00 03:46:10.180 READ DMA EXT 25 d1 00 ff ff ff 4f 00 03:46:10.147 READ DMA EXT b0 d1 01 01 4f c2 00 00 03:46:10.120 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] I dont know mutch how to read this. But my questin is now if this are only few sectors i still can use this Harddisk ? are these bad secors now registerd and not used by the system or will i ppbl loose data using this HDD still in my array? I need to Work with Unraid soon but cant wait on other Harddisks so what is yoru advise ? Take it out or leave it in the array? Thx for help. tronshome-diagnostics-20240210-1158.zip