razorline

If you do the linux VM idea let me know how that goes, i am curious on this myself since it wouldn't need a lot of cores, storage or ram to be usage.

Ah gotcha. I did see a openclaw docker container that has that capability already implemented and wasn't sure how that would work. Thank you though!

Also Has anyone added a browser to the docker? I'm trying to get this to work but I have no idea what to do to get this going. Anyone else got it to work?

Has anyone added a browser to the docker? I'm trying to get this to work but I have no idea what to do to get this going. Anyone else got it to work? I ended up using imap and it works better. I kinda gave up on gog since it kept getting disconnected.

yes right now the issue is known. Here is a link to where it can be fixed. https://github.com/openclaw/openclaw/pull/17296 Mostly just downgrade back to the previous version. I have no idea how so i hope someone to help with that!

I am trying to set up gog for google and the auth url it wants me to use doesn't work since its not from the same instance, is there a work around for this?

Thank you for the confirmation. Stinks the first disk i buy its DOA. Ill try a new cord but i don't think thats it, they was working with a lower TB HDD i was replacing.

Good afternoon, I recently picked up a referb HDD and for some reason, the system can not read it, Here are the logs of what i am able to get. I wanted some opinions on if this is fixable or just a DOA drive. I plan on shipping it off tomorrow if it can not be fixed. Let me know what you think. When i go into Attrubutes, i get this error /dev/ Unable to detect device type According to SMART i get this error. Use smartctl -h to get a usage summary below is what i get when i run the command. == START OF INFORMATION SECTION === Device Model: HUH721212ALE601 Serial Number: 8DJXEL7Y LU WWN Device Id: 5 000cca 253e91c68 Firmware Version: LEGL0002 User Capacity: 12,000,138,625,024 bytes [12.0 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database 7.3/5528 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Jul 19 19:10:00 2024 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Write SCT (Get) Feature Control Command failed: scsi error badly formed scsi parameters Wt Cache Reorder: Unknown (SCT Feature Control command failed) Read SMART Data failed: scsi error badly formed scsi parameters === START OF READ SMART DATA SECTION === SMART Status command failed: scsi error badly formed scsi parameters SMART overall-health self-assessment test result: UNKNOWN! SMART Status, Attributes and Thresholds cannot be read. Read SMART Log Directory failed: scsi error badly formed scsi parameters ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: scsi error badly formed scsi parameters Read GP Log Directory failed SMART Extended Comprehensive Error Log (GP Log 0x03) not supported Read SMART Error Log failed: scsi error badly formed scsi parameters SMART Extended Self-test Log (GP Log 0x07) not supported Read SMART Self-test Log failed: scsi error badly formed scsi parameters Selective Self-tests/Logging not supported SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 0 Celsius Power Cycle Min/Max Temperature: -3/ 3 Celsius Lifetime Min/Max Temperature: 0/ 0 Celsius Under/Over Temperature Limit Count: 0/0 Write SCT Data Table failed: scsi error badly formed scsi parameters Read SCT Temperature History failed Write SCT (Get) Error Recovery Control Command failed: scsi error badly formed scsi parameters SCT (Get) Error Recovery Control command failed Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: scsi error badly formed scsi parameters Read SATA Phy Event Counters failed

Getting a odd issue. Just installed it and set up the file permissions. This is what i get. Can't launch the WebUI. Starting web ui [2024-02-28 17:08:16,889] DEBUG ARM: __init__.<module> Debugging pin: 12345 [2024-02-28 17:08:16,973] DEBUG ARM: utils.arm_alembic_get Alembic Head is: 469d88477c13 [2024-02-28 17:08:16,973] DEBUG ARM: utils.arm_db_check Database file is not present: /home/arm/db/arm.db [2024-02-28 17:08:16,973] DEBUG ARM: utils.arm_db_cfg No armui cfg setup [2024-02-28 17:08:16,974] INFO ARM: utils.check_db_version No database found. Initializing arm.db... Traceback (most recent call last): File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/engine/base.py", line 145, in __init__ self._dbapi_connection = engine.raw_connection() File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/engine/base.py", line 3288, in raw_connection return self.pool.connect() File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/pool/base.py", line 452, in connect return _ConnectionFairy._checkout(self) File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/pool/base.py", line 1267, in _checkout fairy = _ConnectionRecord.checkout(pool) File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/pool/base.py", line 716, in checkout rec = pool._do_get() File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/pool/impl.py", line 284, in _do_get return self._create_connection() File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/pool/base.py", line 393, in _create_connection return _ConnectionRecord(self) File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/pool/base.py", line 678, in __init__ self.__connect() File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/pool/base.py", line 903, in __connect pool.logger.debug("Error on connect(): %s", e) File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/util/langhelpers.py", line 147, in __exit__ raise exc_value.with_traceback(exc_tb) File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/pool/base.py", line 898, in __connect self.dbapi_connection = connection = pool._invoke_creator(self) File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/engine/create.py", line 637, in connect return dialect.connect(*cargs, **cparams) File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/engine/default.py", line 615, in connect return self.loaded_dbapi.connect(*cargs, **cparams) sqlite3.OperationalError: unable to open database file The above exception was the direct cause of the following exception: Traceback (most recent call last): File "/opt/arm/arm/runui.py", line 8, in <module> import arm.config.config as cfg # noqa E402 File "/opt/arm/arm/../arm/__init__.py", line 2, in <module> import arm.ripper File "/opt/arm/arm/../arm/ripper/__init__.py", line 3, in <module> from arm.ripper import logger, utils, makemkv, handbrake, identify, ARMInfo # noqa F401 File "/opt/arm/arm/../arm/ripper/utils.py", line 24, in <module> from arm.ui import db # needs to be imported before models File "/opt/arm/arm/../arm/ui/__init__.py", line 66, in <module> from arm.ui.database.database import route_database # noqa: E402,F811 File "/opt/arm/arm/../arm/ui/database/database.py", line 28, in <module> armui_cfg = ui_utils.arm_db_cfg() File "/opt/arm/arm/../arm/ui/utils.py", line 206, in arm_db_cfg check_db_version(cfg.arm_config['INSTALLPATH'], cfg.arm_config['DBFILE']) File "/opt/arm/arm/../arm/ui/utils.py", line 88, in check_db_version flask_migrate.upgrade(mig_dir) File "/usr/local/lib/python3.8/dist-packages/flask_migrate/__init__.py", line 111, in wrapped f(*args, **kwargs) File "/usr/local/lib/python3.8/dist-packages/flask_migrate/__init__.py", line 200, in upgrade command.upgrade(config, revision, sql=sql, tag=tag) File "/usr/local/lib/python3.8/dist-packages/alembic/command.py", line 399, in upgrade script.run_env() File "/usr/local/lib/python3.8/dist-packages/alembic/script/base.py", line 578, in run_env util.load_python_file(self.dir, "env.py") File "/usr/local/lib/python3.8/dist-packages/alembic/util/pyfiles.py", line 93, in load_python_file module = load_module_py(module_id, path) File "/usr/local/lib/python3.8/dist-packages/alembic/util/pyfiles.py", line 109, in load_module_py spec.loader.exec_module(module) # type: ignore File "/opt/arm/arm/migrations/env.py", line 89, in <module> run_migrations_online() File "/opt/arm/arm/migrations/env.py", line 73, in run_migrations_online connection = engine.connect() File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/engine/base.py", line 3264, in connect return self._connection_cls(self) File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/engine/base.py", line 147, in __init__ Connection._handle_dbapi_exception_noconnection( File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/engine/base.py", line 2426, in _handle_dbapi_exception_noconnection raise sqlalchemy_exception.with_traceback(exc_info[2]) from e File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/engine/base.py", line 145, in __init__ self._dbapi_connection = engine.raw_connection() File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/engine/base.py", line 3288, in raw_connection return self.pool.connect() File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/pool/base.py", line 452, in connect return _ConnectionFairy._checkout(self) File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/pool/base.py", line 1267, in _checkout fairy = _ConnectionRecord.checkout(pool) File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/pool/base.py", line 716, in checkout rec = pool._do_get() File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/pool/impl.py", line 284, in _do_get return self._create_connection() File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/pool/base.py", line 393, in _create_connection return _ConnectionRecord(self) File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/pool/base.py", line 678, in __init__ self.__connect() File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/pool/base.py", line 903, in __connect pool.logger.debug("Error on connect(): %s", e) File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/util/langhelpers.py", line 147, in __exit__ raise exc_value.with_traceback(exc_tb) File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/pool/base.py", line 898, in __connect self.dbapi_connection = connection = pool._invoke_creator(self) File "/usr/local/lib/python3.8/dist-packages/sqlalchemy/engine/create.py", line 637, in connect return dialect.connect(*cargs, **cparams) ... (4 lines left)