Di4rnu

No one can help? :( Have I posted in the correct subforum?

Hello When I use the evdev passthrough of my keyboard and mouse on my Win11 VM on Unraid 7.2.2, only the keyboard toggling works. I have tried interchanging which device is listed as the first evdev device interchanging which USB port the devices are plugged into using the same toggle and different toggles for the two devices (and interchanging the toggles in the case where they are different) passing through the keyboard normally (under the "USB Devices" section) and only using evdev passthrough for the mouse (the mouse still won't toggle) two different wired mice I also made sure that the devices are not ticked for passthrough in the "USB Devices" section of the VM template. The two devices are plugged into the same USB controller on the motherboard (it only has one). I hope that a kind soul in here can help me making this work.

Hi bmartino1 Thanks for your reply. The idea is to have the USB in a PCIE card that is not passed through, but then pass through the motherboard USB controller instead. If I understand you correctly, it should not be an issue (at least for some PCIE cards)

Hello Is it a bad idea to plug the Unraid flash drive into a PCIE USB expansion card? Do people have experience with some USB expansion card chipsets being better than others? USB2 vs USB3 (my flash drive is USB2)? The reason is that I want to pass through a USB controller to my Windows 11 VM - I need at least 4 USB A ports but 5 or 6 would be preferable. However all my motherboard's (Asus Pro WS W680-ACE IPMI) many USB ports belong to the same controller so no matter where I plug in the Unraid flash drive on the motherboard, I can not pass through any USB controller to my Windows 11 VM. The obvious solution would be to buy a PCIE USB expansion card and pass through that to the VM. However, if I instead plug the Unraid flash drive into the PCIE card, then I don't need that many ports on the card and I can pass through the motherboard USB controller and have 10+ USB ports available for the VM. I hope someone can shed light on whether this is a good or bad idea.

Thank you for the quick reply! What do you mean by "dump the xml"? It seems that "Virsh dumpxml vmname" is a command that will give me the xml file.

Sorry for necro-posting but his is relevant to me. Will the reactivation mean that everything on the vdisk will be lost? Or is it just a matte of retyping the activation key?

Do you "switch" / convert your Win VM from i440fx to Q35, or did you make a new Win VM with Q35? I would like to convert my VM from i440fx to Q35 if possible.

This seems to solve my issue. Thanks!

The plugin has worked for me before but now it keeps giving an error about not being able to create the destination folder: [03.04.2025 22:01:25][ℹ️][Main] 👋 WELCOME TO APPDATA.BACKUP!! :D [03.04.2025 22:01:25][ℹ️][Main] Backing up from: /mnt/user/appdata, /mnt/cache/appdata [03.04.2025 22:01:25][ℹ️][Main] Backing up to: /mnt/user/backups-old/appdata/ab_20250403_220125 [03.04.2025 22:01:25][❌][Main] Cannot create destination folder! [03.04.2025 22:01:25][ℹ️][Main] Checking retention... [03.04.2025 22:01:25][ℹ️][Main] DONE! Thanks for using this plugin and have a safe day ;) [03.04.2025 22:01:25][ℹ️][Main] ❤️ What could be the reason? The folder /mnt/user/backups-old/appdata exists (The plugin log file should be at "/tmp/appdata.backup" but I can't find that location. Where is it?)

I had to press-hold the power button to shut down and then boot again. Is there anything in the diagnostics file indicating a possible cause? vault-diagnostics-20250307-2240.zip

Thanks for your reply! Yes, I should have clarified that it is for Win10 or Win11 VMs. So it shouldn't matter that the host is Linux-based when it's passed through?

I am considering buying the following as a DisplayLink adapter: https://plugable.com/products/usbc-6950u However , it says that "We do not recommend or support our DisplayLink based graphics adapters with Linux at this time". On this site where I can buy it, it says "Not compatible with MacOS, Linux/UNIX or ARM-based Windows." Do you think it will work?

Does this work with machine type i440fx or does it have to be Q35?

I see, in that case I will try it out. Thanks again! The goal is to connect physically to a (local) monitor without a dGPU. Out of curiosity, where would you rank Splashtop among those stream softwares?

Would I gain anything in VM graphics with the USB-to-HDMI dongle solution compared to just virtual graphics card? So I can't pass through the entire iGPU from my i13500? Thank you for taking the time to answer my questions!

I am a relatively new Unraid user so I hope you bear with me. I want to use my Unraid machine locally, i.e. have local monitor(s). I want to save the cost of buying and running a dGPU. More specifically, I would like to use the iGPU for my Windows 10/11 VM with output to a local monitor and at the same time still be able to access the Unraid GUI locally (on a second local monitor if necessary). Is the above only possible with a USB-to-HDMI dongle? My understanding is that if I pass through the entire iGPU to the VM, then I won't be able to access the Unraid GUI locally. Is that correct?

Does Mover do some kind of verification that the files were moved without errors (beyond file name and size?) Maybe something equivalent to the checksum option with Rsync? I apologize if this should have been posted in another forum.

I followed the steps to disable Docker, change Docker storage driver to overlay2, re-enable Docker and re-download all the Docker applications. However, it does not seem that my custom docker network was deleted. It is still listed if I run "docker network ls" and it seem that my container apps on my custom docker network can still refer to each other by the container name instead of the IP addresses. Do you think I did something wrong?

Thank you! I had a feeling that I had configured something the wrong way.

Is this plugin still needed for Unraid 7.0.0 if I want to be able to take snapshots in the GUI?

Thank you for this great plugin! 🙏 I have the classic problem discussed numerous times in this thread: "X does not have any volume to back up!" I thought that I had set the plugin up correctly to back up from /mnt/user/appdata and /mnt/cache/appdata. However, my container volume mappings are /config <-> /mnt/dockers/appdata/<container_name> where "dockers" is the NVMe drive that the appdata lives on. Adding /mnt/dockers/appdata to the appdata sources in the settings fixed the issue. Now I am confused. If I go to Shares -> appdata, it leads me to /mnt/user/appdata where I see all the appdata and I also see that the location is "dockers". I am not very tech savvy, could someone explain why I needed to add /mnt/dockers/appdata to the appdata sources in the settings? Have I set up the appdata structures in a not-so-smart way? Log with the error (I have more containers than shown here): [14.01.2025 20:02:06][ℹ️][Main] 👋 WELCOME TO APPDATA.BACKUP!! :D [14.01.2025 20:02:06][ℹ️][Main] Backing up from: /mnt/user/appdata, /mnt/cache/appdata [14.01.2025 20:02:06][ℹ️][Main] Backing up to: /mnt/user/backups/appdata/ab_20250114_200206 [14.01.2025 20:02:06][ℹ️][Main] Selected containers: prowlarr, qbittorrent, radarr [14.01.2025 20:02:06][ℹ️][Main] Saving container XML files... [14.01.2025 20:02:06][ℹ️][Main] Method: Stop all container before continuing. [14.01.2025 20:02:06][ℹ️][radarr] No stopping needed for radarr: Not started! [14.01.2025 20:02:06][ℹ️][qbittorrent] No stopping needed for qbittorrent: Not started! [14.01.2025 20:02:06][ℹ️][Main] Starting backup for containers [14.01.2025 20:02:06][ℹ️][radarr] Should NOT backup external volumes, sanitizing them... [14.01.2025 20:02:06][⚠️][radarr] radarr does not have any volume to back up! Skipping. Please consider ignoring this container. [14.01.2025 20:02:06][ℹ️][qbittorrent] Should NOT backup external volumes, sanitizing them... [14.01.2025 20:02:06][⚠️][qbittorrent] qbittorrent does not have any volume to back up! Skipping. Please consider ignoring this container. [14.01.2025 20:02:06][ℹ️][Main] Set containers to previous state [14.01.2025 20:02:06][ℹ️][qbittorrent] Starting qbittorrent is being ignored, because it was not started before (or should not be started). [14.01.2025 20:02:06][ℹ️][radarr] Starting radarr is being ignored, because it was not started before (or should not be started). [14.01.2025 20:02:06][ℹ️][Main] Backing up the flash drive. [14.01.2025 20:02:26][ℹ️][Main] Flash backup created! [14.01.2025 20:02:26][ℹ️][Main] Copying the flash backup to '/mnt/user/backups/flash_drive/' as well... [14.01.2025 20:02:26][ℹ️][Main] VM meta backup enabled! Backing up... [14.01.2025 20:02:26][ℹ️][Main] Done! [14.01.2025 20:02:26][ℹ️][Main] Checking retention... [14.01.2025 20:02:26][ℹ️][Main] DONE! Thanks for using this plugin and have a safe day ;) [14.01.2025 20:02:26][ℹ️][Main] ❤️

Would really appreciate if someone can answer this.

If I move a fragmented file from one disk to another with the file manager, will it be written sequentially to the second disk?

I deleted the Syslog_previous in the directory "logs" on the flash drive and now Tools -> Diagnostics runs fine!

Here is the diagnostics obtained by using the terminal command vault-diagnostics-20241116-2256.zip