saohh

Hello, i have meanwhile also done some seperate testing, after i figured without any services it had run long enough, that the memory consumption was of course also way lower. So i checked one by one all four memory modules i had used, and right away the first one, the system wouldnt even boot with it alone, the other three were running fine after, and at first i started with each of them with Safe Mode without plugins, then activating Docker, and it was stable, for each of the three memory modules. in short: It was an Hardware Failure, one memory module was defect, this can be closed. thank you for your time and help / effort. kind regards,

So far it is running without a problem, as a Fileserver only (without Docker and VMs). Now a question: Do you suggest to keep using it booted as Safe Mode without Plugins, or should i continue now and restart (still keep using No Docker, No VMs) but with the Normal Boot Entry? I mean do you maybe know, what other then the plugins being ignored, is different between the two Boot Options?

Hello, Ok, i will try that, and report back here in a few days then, thank you

Hello, this is a follow-up for my previous post, where i believed the issue was fixed: It worked a few hours, and now the Unraid WebGUI has stopped responding again. I run in one of the docker containers a minecraft server, and when it did not react anymore (i was already connected, then went afk a while got disconnected and wanted to reconnect) it was not responding anymore. Checking for all docker containers in the Unraid WebGUI resulted again in the WebUI stopping to respond. Attached is the syslog.txt file from the flashdisk. i really hope someone can help me with finding the root cause, this is really annoying. syslog

Hello, thank you guys, i have just renamed two files related to this new patch plugin (that supposedly should provide important patches between main upgrades of unraid versions) and after following your recommendation, of renaming these .plg files, now the Unraid WebGUI is responding again. I still have the syslog active, also with copy on the flash drive therefore i would say lets close this for now and if it returns, i will refer to this post and provid the syslog details there too, but i hope its fixed now. Thank you very much for your help

Hello, so do you think it could be the plugins or not? A question. when i started in Safe Mode without Plugins, did that deactivate the plugins also for the "normal Start" and i have to readd them again from scratch, or will the plugins there still be active? I mean if potentially they are the rootcause of the problem, then it would be nice to know, how to remove the plugins from the normal boot. Can you explain, how i could accomplish that please?

I just checked, the patch plugin is already not active, maybe thats the reason indeed it runs stable now. I will report back, when something goes wrong with the system again (and hopefully the syslog will show something of value then for you). A question meanwhile are there any commands and or suggestions, what i could run and or should do? e.g. reboot in normal mode now? kind regards,

yes, safe mode, sorry for the confusion. interesting, you are mentioning, that, because that came to my mind as well, as i just recently added it. Anyhow, shouldn't that serve the exact opposit purpose making things even more stable as it fixed things in between main upgrades? i will try deactivating it as you suggested.

Hello, i am a bit annoyed, it is just working right now, but i have booted it in Secure Booting methog with GUI, is there any kind of command etc. you would want me to run to analyze it further that could help us to get to the root cause? Or do i now have to wait for the issue to happen again? btw. thank you so much for your time and help

Hello, i just activated the syslog server also with the subpoint to copy the syslog to the flash. lets see. To answer your last question: yes, i did once, but last time i tried (safe mode boot with gui) i managed to press "Start" the array, and then lost the response of the WebUI.

Hello, is there a command on the server i can run, to enable the syslog server, or this can only be done via the WebUI? I am not sure how many clicks that is, and if i will be able to activate it via WebGUI so command line would be prefereable. And once i have it activated, can you also tell me, what i should copy to the USB /boot then? i mean which file does it create? Or is this also something that is in the WebGUI? kind regards,

Hello, i did start with Unraid in Safe mode (without Plugins but GUI), after two clicks, the WebGUI from Unraid stopped reacting (by the way i left that tab open this time, instead of opening another one, and it seems to somehow loosing the connection (browser says Unable to connect / using Firefox). Please find attached the syslog.txt (which i manage to store on my bootdrive before the WebGUI just gave up again ;( i hope it helps, please let me know in case you need anything else. syslog.txt

well as i also explained, i could not, because when i checked if the array was complete (3 x HDDs) which it was, i recognized the Cache Pool was empty, so i added one of my two SSDs which i use as a cache, but when i wanted to switch the Cache Pool size to 2 disks and add my second SSD, the WebUI became unresponsive and was not working anymore, that is exactly my problem, i do not get to do that it seems. So it seems to me the UI might take one or two clicks and update once or twice, but at some point stops working, thats why i posted here to ask if someone knows a way to troubleshoot this.

Hello, my unraid server has stopped working, first i recognized i could not get to the WebUI. After restarting i recognized there was a problem as the WebUI worked again and the array was not started, also the cache pool was without any drives, adding one and then clicking on 2 broke the WebUI (it just stopped updating), and after that i could not get the array up for a parity check. This really sucks, what is the troubleshooting way for a situation like this? I use the latest Unraid Stable (7.0) and am always updating plugins, as i mentioned the system booted just fine for several days now (i had it moved recently to a new hardware). Attached you can find my diagnostics file, as i found in the forum a description mentioning this should be provided with such an troubleshooting help request. I hope someone will know this and can advise what steps i should take next. Kind regards, sun-diagnostics-20250219-2011.zip

Hello, , i checked the Battery, but i totally forgot about the BIOS clock and date Settings. After Setting the date and time in the BIOS correctly the community applications plugin installed just fine - issue fixed, thank you! kind regards.