schalmers

I unistalled NUT and tried the default UPS app and it didn't work on default settings, just shows lost communication Apr 25 23:06:13 HomeSrv root: plugin: running: anonymous Apr 25 23:06:23 HomeSrv root: plugin: nut-dw.plg removed Apr 25 23:07:34 HomeSrv apcupsd[19282]: apcupsd 3.14.14 (31 May 2016) slackware startup succeeded Apr 25 23:07:34 HomeSrv apcupsd[19282]: NIS server startup succeeded Apr 25 23:08:44 HomeSrv apcupsd[19282]: Communications with UPS lost. Apr 25 23:08:44 HomeSrv sSMTP[25149]: Creating SSL connection to host Apr 25 23:08:44 HomeSrv sSMTP[25149]: SSL connection using TLS_AES_256_GCM_SHA384 Apr 25 23:08:47 HomeSrv sSMTP[25149]: Sent mail for [email protected] (221 2.0.0 closing connection t18-20020a05600c199200b00417ee784fcasm28619198wmq.45 - gsmtp) uid=0 username=root outbytes=728 Thanks again for the help trying

I appreciate all of the help, I have been trying different USB ports with both of the 2 drivers "nutdrv_qx" and "blazer_usb" with all of your recommendations to keep commented out but I have not had any luck. I guess I will have no other choice but to look for a different UPS for this server. Thanks again

Changed UPS.CONF to: [ups] driver = "blazer_usb" port = "auto" vendorid = "0001" productid = "0000" product = "MEC0003" vendor = "MEC" bus = "003" Syslog shows the different driver but it still failed.... Apr 25 21:16:26 HomeSrv ool www[24750]: /usr/local/emhttp/plugins/nut-dw/scripts/start Apr 25 21:16:27 HomeSrv rc.nut: Writing NUT configuration... Apr 25 21:16:29 HomeSrv rc.nut: Updating permissions for NUT... Apr 25 21:16:29 HomeSrv rc.nut: Checking if the NUT Runtime Statistics Module should be enabled... Apr 25 21:16:29 HomeSrv rc.nut: Disabling the NUT Runtime Statistics Module... Apr 25 21:16:35 HomeSrv rc.nut: No supported UPS detected Apr 25 21:16:35 HomeSrv rc.nut: Network UPS Tools - Megatec/Q1 protocol USB driver 0.20 (2.7.4.1) Apr 25 21:16:35 HomeSrv rc.nut: Driver failed to start (exit status=1) Apr 25 21:16:35 HomeSrv rc.nut: Network UPS Tools - UPS driver controller 2.7.4.1

Ok I reset the UPS.CONF back to: [ups] driver = "nutdrv_qx" # alternately: blazer_usb nutdrv_atcl_usb port = "auto" vendorid = "0001" productid = "0000" product = "MEC0003" vendor = "MEC" # bus = "003" # device = "002" # busport = "001" Then I changed the version back to "legacy (2.7.4 stable)" and closed down all VMs, Dockers, Array and restarted the server. Verified in NUT Settings were the proper version: and restarted the NUT service the syslog still shows error: Apr 25 20:45:10 HomeSrv ool www[10410]: /usr/local/emhttp/plugins/nut-dw/scripts/start Apr 25 20:45:11 HomeSrv rc.nut: Writing NUT configuration... Apr 25 20:45:13 HomeSrv rc.nut: Updating permissions for NUT... Apr 25 20:45:13 HomeSrv rc.nut: Adding UDEV lines to rc.6 for NUT... Apr 25 20:45:13 HomeSrv rc.nut: Adding UPS shutdown lines to rc.6 for NUT... Apr 25 20:45:13 HomeSrv rc.nut: Checking if the NUT Runtime Statistics Module should be enabled... Apr 25 20:45:13 HomeSrv rc.nut: Disabling the NUT Runtime Statistics Module... Apr 25 20:45:28 HomeSrv rc.nut: Device not supported! Apr 25 20:45:28 HomeSrv rc.nut: Device not supported! Apr 25 20:45:28 HomeSrv rc.nut: Network UPS Tools - Generic Q* USB/Serial driver 0.39 (2.7.4.1) Apr 25 20:45:28 HomeSrv rc.nut: USB communication driver 0.43 Apr 25 20:45:28 HomeSrv rc.nut: Driver failed to start (exit status=1) Apr 25 20:45:28 HomeSrv rc.nut: Network UPS Tools - UPS driver controller 2.7.4.1 The FULL syslog from restart to starting NUT service is attached if it helps you see anything interesting. Again really appreciate the help. decided to try something ... Checked Autoconfig in this 2.7.4 version and it returned a slightly different UPS.CONF (bus = "003" not REM'd out) [ups] driver = "nutdrv_qx" port = "auto" vendorid = "0001" productid = "0000" product = "MEC0003" vendor = "MEC" bus = "003" Started the Service again but same error from what I can tell: Apr 25 20:57:12 HomeSrv ool www[3490]: /usr/local/emhttp/plugins/nut-dw/scripts/stop Apr 25 20:57:13 HomeSrv rc.nut: Writing NUT configuration... Apr 25 20:57:15 HomeSrv rc.nut: Updating permissions for NUT... Apr 25 20:57:15 HomeSrv rc.nut: Checking if the NUT Runtime Statistics Module should be enabled... Apr 25 20:57:15 HomeSrv rc.nut: Disabling the NUT Runtime Statistics Module... Apr 25 20:57:16 HomeSrv rc.nut: Stopping the NUT services... Apr 25 20:57:18 HomeSrv rc.nut: Can't open /var/run/nut/nutdrv_qx-ups.pid: No such file or directory Apr 25 20:57:18 HomeSrv rc.nut: Can't open /var/run/nut/nutdrv_qx-auto.pid either: No such file or directory Apr 25 20:57:18 HomeSrv rc.nut: Network UPS Tools - UPS driver controller 2.7.4.1 Apr 25 20:57:28 HomeSrv emhttpd: cmd: /usr/local/emhttp/plugins/nut-dw/scripts/nutscan Apr 25 21:00:33 HomeSrv ool www[14971]: /usr/local/emhttp/plugins/nut-dw/scripts/start Apr 25 21:00:34 HomeSrv rc.nut: Writing NUT configuration... Apr 25 21:00:36 HomeSrv rc.nut: Updating permissions for NUT... Apr 25 21:00:36 HomeSrv rc.nut: Checking if the NUT Runtime Statistics Module should be enabled... Apr 25 21:00:36 HomeSrv rc.nut: Disabling the NUT Runtime Statistics Module... Apr 25 21:00:51 HomeSrv rc.nut: Device not supported! Apr 25 21:00:51 HomeSrv rc.nut: Device not supported! Apr 25 21:00:51 HomeSrv rc.nut: Network UPS Tools - Generic Q* USB/Serial driver 0.39 (2.7.4.1) Apr 25 21:00:51 HomeSrv rc.nut: USB communication driver 0.43 Apr 25 21:00:51 HomeSrv rc.nut: Driver failed to start (exit status=1) Apr 25 21:00:51 HomeSrv rc.nut: Network UPS Tools - UPS driver controller 2.7.4.1 homesrv-syslog-20240425-1848.zip

Thank you for replying I modified the UPS.CONF to be: [ups] driver = "nutdrv_qx" # alternately: blazer_usb nutdrv_atcl_usb port = "auto" vendorid = "0001" productid = "0000" product = "MEC0003" vendor = "MEC" # bus = "003" # device = "002" # busport = "001" subdriver = "hunnox" And restarted the NUT Service but unfortunately I am still getting the same type of error in Syslog: Apr 25 20:21:14 HomeSrv ool www[5285]: /usr/local/emhttp/plugins/nut-dw/scripts/stop Apr 25 20:21:15 HomeSrv rc.nut: Writing NUT configuration... Apr 25 20:21:16 HomeSrv rc.nut: Updating permissions for NUT... Apr 25 20:21:16 HomeSrv rc.nut: Checking if the NUT Runtime Statistics Module should be enabled... Apr 25 20:21:16 HomeSrv rc.nut: Disabling the NUT Runtime Statistics Module... Apr 25 20:21:17 HomeSrv rc.nut: Stopping the NUT services... Apr 25 20:21:19 HomeSrv rc.nut: Can't open /var/run/nut/nutdrv_qx-ups.pid: No such file or directory Apr 25 20:21:19 HomeSrv rc.nut: Can't open /var/run/nut/nutdrv_qx-auto.pid either: No such file or directory Apr 25 20:21:19 HomeSrv rc.nut: Network UPS Tools - UPS driver controller 2.8.2 Apr 25 20:21:29 HomeSrv ool www[5286]: /usr/local/emhttp/plugins/nut-dw/scripts/start Apr 25 20:21:30 HomeSrv rc.nut: Writing NUT configuration... Apr 25 20:21:31 HomeSrv rc.nut: Updating permissions for NUT... Apr 25 20:21:31 HomeSrv rc.nut: Checking if the NUT Runtime Statistics Module should be enabled... Apr 25 20:21:31 HomeSrv rc.nut: Disabling the NUT Runtime Statistics Module... Apr 25 20:22:03 HomeSrv rc.nut: Device not supported! Apr 25 20:22:03 HomeSrv rc.nut: Device not supported! Apr 25 20:22:03 HomeSrv rc.nut: Network UPS Tools - Generic Q* USB/Serial driver 0.36 (2.8.2) Apr 25 20:22:03 HomeSrv rc.nut: USB communication driver (libusb 1.0) 0.47 Apr 25 20:22:03 HomeSrv rc.nut: Driver failed to start (exit status=1) Apr 25 20:22:03 HomeSrv rc.nut: Network UPS Tools - UPS driver controller 2.8.2

Hi, I am looking for some help if possible to setup my UPS, a Greencell UPS04 Micropower 1500 on my unraid server. When I install the NUT plugin 2.8.2 and do an autoconfig it returns the following: /etc/nut/ups.conf [ups] driver = "nutdrv_qx" # alternately: blazer_usb nutdrv_atcl_usb port = "auto" vendorid = "0001" productid = "0000" product = "MEC0003" vendor = "MEC" # bus = "003" # device = "002" # busport = "001" After searching the internet I tried running nut-scanner -C but it gave the same results root@HomeSrv:~# nut-scanner -C Cannot load XML library (libneon.so) : file not found. XML search disabled. Cannot load IPMI library (libfreeipmi.so) : file not found. IPMI search disabled. Scanning USB bus. No start IP, skipping SNMP No start IP, skipping NUT bus (old connect method) Scanning NUT simulation devices. Scanning NUT bus (avahi method). [nutdev-usb1] driver = "nutdrv_qx" # alternately: blazer_usb nutdrv_atcl_usb port = "auto" vendorid = "0001" productid = "0000" product = "MEC0003" vendor = "MEC" # bus = "003" # device = "002" # busport = "001" root@HomeSrv:~# nut -h But when I start the NUT service I get the following in Syslog: Driver failed to start (exit status=1) Apr 25 19:33:11 HomeSrv ool www[5732]: /usr/local/emhttp/plugins/nut-dw/scripts/start Apr 25 19:33:12 HomeSrv rc.nut: Writing NUT configuration... Apr 25 19:33:13 HomeSrv rc.nut: Updating permissions for NUT... Apr 25 19:33:13 HomeSrv rc.nut: Checking if the NUT Runtime Statistics Module should be enabled... Apr 25 19:33:13 HomeSrv rc.nut: Disabling the NUT Runtime Statistics Module... Apr 25 19:33:33 HomeSrv rc.nut: Device not supported! Apr 25 19:33:33 HomeSrv rc.nut: Device not supported! Apr 25 19:33:33 HomeSrv rc.nut: Network UPS Tools - Generic Q* USB/Serial driver 0.36 (2.8.2) Apr 25 19:33:33 HomeSrv rc.nut: USB communication driver (libusb 1.0) 0.47 Apr 25 19:33:33 HomeSrv rc.nut: Driver failed to start (exit status=1) Apr 25 19:33:33 HomeSrv rc.nut: Network UPS Tools - UPS driver controller 2.8.2 I have tried the 2 proposed alternate drivers but unfortunately neither of them are working either... I have tried using older versions of NUT as I found a post on the internet where someone said they got the "MEC0003" to work with NUT using version 2.8.0 with driver blazer_usb but unfortunately that did not work for me. I am still new to Unraid but very willing to learn if someone can point me in the right direction. If additional log files could be useful please let me know and I will be happy to provide them if told how to get them. Full syslogs and diagnotic files attached Thank you for your help homesrv-syslog-20240425-1745.zip homesrv-diagnostics-20240425-1915.zip