BIGtoeknee

Thanks for the confirmation. Still getting the UDMA CRC errors on disk2, so I think that drive needs to be replaced.

Got ya here you go. flair-diagnostics-20250221-1456.zip

Oh sorry about that, here is the one with the array started but in maintenance mode if that's not ok let me know. Appreciate the assistance here. flair-diagnostics-20250221-1331.zip

Was able to repair the file system on disk 6 am I good to add them back to the array? flair-diagnostics-20250221-1233.zip

That worked for the cache drives. Thank you. Here is the new diag for the array. flair-diagnostics-20250221-1008.zip

Here you go. Label: none uuid: 5fd43c19-2e69-4009-9ee4-b3a556723527 Total devices 4 FS bytes used 904.37GiB devid 1 size 3.64TiB used 439.96GiB path /dev/nvme2n1p1 devid 2 size 3.64TiB used 439.96GiB path /dev/nvme1n1p1 devid 3 size 931.51GiB used 356.00GiB path /dev/nvme0n1p1 devid 4 size 931.51GiB used 356.00GiB path /dev/nvme3n1p1

Long story short, or short story long, I had a 1 disk failure on an extremely old drive replaced it with a new larger drive (no problem) rebuilt just fine. Then another drive went down and that was replaced and rebuilt fine. Now yesterday, I had UDMA CRC errors on disk2, checked cables and power cables on all drives (I messed up and didn't document the drive locations when build) and it came back for a little while and happened again, this time the drive became "disabled". Now today disk 6 became disabled and had an error along the lines of (wrong filesystem or disk format) well that cant be right it was just working. Fast forward to now, I have both disks visible in the console but they are "new devices" and now my cache drives are all "new devices" Am I cooked here? flair-diagnostics-20250220-2033.zip

I've been having mover issues since upgrading to 7.0.0. Its odd and will work sometimes but right now everything I have thrown at it hasn't worked. Cache disk is full and for some reason not moving data to my array. Any ideas? flair-diagnostics-20250216-1041.zip

I have an drive that had in my array at one point and removed it. I never used it for anything else but its showing up in unassigned devices but I am unable to do anything to the drive but "Pre-clear" it. I dont want to zero out my entire drive thats going to take 3 days to do. Why am I unable to utilize a format disk call and just add it back to my array?

Thanks. I do see an increase here to about 125MB/s. This is significant, thank you for that!

These would be large files, varying from 8gb to 70gb.

Hi, Mover seems to be extremely slow for me. Not sure if its Mover itself or possible I have something configured wrong in my Array. Its been trying to move 6TB from my SSD cache to my array and its been about 16 hours. I recently upgraded to 7.0.0 but didn't notice this behavior on the previous release, granted it still seemed slow then. Thanks. flair-diagnostics-20250129-1054.zip

Repository: ghcr.io/mealie-recipes/mealie:nightly ? This is what I have currently as default.

Any plans to update to v2? Really looking to utilize the openAI image processing for recipes.

I've been putting these drives through the gauntlet since I executed this and they havent dropped. I believe this is the solution. Thanks!