Dwarfboysim

I also tried: lsusb and it gave the below Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 0d9f:0002 Powercom Co., Ltd Black Knight PRO / WOW Uninterruptible Power Supply (Cypress HID->COM RS232) Bus 001 Device 003: ID 0781:5567 SanDisk Corp. Cruzer Blade Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Hi, I opened up a terminal in Unraid and got the following results for the command: ls /dev/ttyUSB* I got "ls: cannot access '/dev/ttyUSB*': No such file or directory" for the command: dmesg | grep tty I got "[ 0.288678] printk: legacy console [tty0] enabled" any clues? Thanks, Dwarfboysim

And does anyone know the actual location of the ups.conf file as I cannot seem to locate it.

Hi, Sorry for the delayed reply. Can I get an example and advice to determine exactly which device/USB port the UPS is connected to and then how to put that into the UPS conf file. Thanks, Dwarfboysim

First command gave error: ls: cannot access '/dev/ttyUSB*': No such file or directory Second command gave this root@UNRAID:~# dmesg | grep ty [ 0.541730] SGI XFS with ACLs, security attributes, no debug enabled [ 0.551252] Key type asymmetric registered [ 2.397144] Btrfs loaded, zoned=no, fsverity=no [ 4.041561] sd 6:0:0:0: Attached scsi generic sg0 type 0 [ 5.383254] sd 0:0:0:0: Attached scsi generic sg1 type 0 [ 5.387705] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 5.389574] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 5.390136] sd 3:0:0:0: Attached scsi generic sg4 type 0 [ 5.390723] sd 4:0:0:0: Attached scsi generic sg5 type 0 [ 5.391168] sd 5:0:0:0: Attached scsi generic sg6 type 0 [ 46.130645] loop0: detected capacity change from 0 to 1334912 [ 46.139547] loop1: detected capacity change from 0 to 355176 [ 80.415912] ACPI: bus type drm_connector registered [ 164.318019] md: import_slot: 0 empty [ 164.318057] md: import_slot: 29 empty [ 218.919599] loop2: detected capacity change from 0 to 94371840 [ 225.054016] loop3: detected capacity change from 0 to 2097152 [ 281.976721] md: import_slot: 0 empty [ 281.976731] md: import_slot: 29 empty [ 321.294373] md: import_slot: 29 empty [ 369.290747] loop2: detected capacity change from 0 to 94371840 [ 372.883723] loop3: detected capacity change from 0 to 2097152

Any idea why it says this in SYSLOG though: Apr 15 07:42:34 UNRAID rc.nut: Unable to open auto: No such file or directorycould the UPS.conf be corrupt? Is the "auto" referring to the line in the UPS.conf?

Thanks for the tip. Still won't start and SYSLOG shows the below: Contents of UPS.CONF inside the NUT plugin settings reads as: [optiups] driver = powercom port = auto type = IMP # If not in manual mode, the following lines are reserved and overwritten by GUI: # L1:[UPSNAME]/L2:DRIVER/L3:PORT/L4-L7:SNMP/L8:DEBUG_MIN Apr 15 07:42:34 UNRAID rc.nut: Network UPS Tools upsdrvctl - UPS driver controller 2.8.5 release Apr 15 07:42:34 UNRAID rc.nut: Network UPS Tools 2.8.5 release - PowerCom protocol UPS driver 0.27 Apr 15 07:42:34 UNRAID rc.nut: Fatal error: unusable configuration Apr 15 07:42:34 UNRAID rc.nut: Apr 15 07:42:34 UNRAID rc.nut: Unable to open auto: No such file or directory Apr 15 07:42:34 UNRAID rc.nut: Apr 15 07:42:34 UNRAID rc.nut: Things to try: Apr 15 07:42:34 UNRAID rc.nut: Apr 15 07:42:34 UNRAID rc.nut: - Check 'port=' in ups.conf Apr 15 07:42:34 UNRAID rc.nut: Apr 15 07:42:34 UNRAID rc.nut: - Check owner/permissions of all parts of path Apr 15 07:42:34 UNRAID rc.nut: Apr 15 07:42:34 UNRAID rc.nut: Driver failed to start (exit status=1)

Hi all, Would love to get my UPS talking with Unraid properly. It's an: OptiUPS ES800C I ran lsusb from the command prompt of unraid and got: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 0d9f:0002 Powercom Co., Ltd Black Knight PRO / WOW Uninterruptible Power Supply (Cypress HID->COM RS232) Bus 001 Device 003: ID 0781:5567 SanDisk Corp. Cruzer Blade Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Could someone assist on what I need to set in NUT and also the /etc/nut/ups.conf please. Thanks, Dwarfboysim

Hi all, Unsure what happened but my binhex qbittorrentvpn docker config got fouled up. I have restored from a back and the vpn is working and my sonarr, radarr etc are all working but I cannot get the web interface for the qbittorrent to open. Somehow i think its put itself onto a different ip to whats being specified in the container. Where can I go to check and test please

Hi all, I have multiple binhex containers sonarr, prowlarr, radarr etc all going happily through the binhex-qbittorrentvpn. I have replicated the network settings for flaresolverr but I continually get this error when going to test it within Prowlarr: "Unable to connect to proxy: An error occurred while sending the request.. Check the log surrounding this error for details" Reading the log for flaresolverr and it appears to be up and running and waiting for something to do.

Sorry for the belated reply. It turned out to be a faulty USB stick. Created a new one and all running fine now.

How can i retrieve the diagnostics please?

Hi all, I have had a problem that was occurring very intermittently but now appears to be happening 90% of the time. My UNRAID box starts up and gets to the login prompt on the box itself. I go to any of my other machines and the WEBGUI is not accessible. The box can be pinged. I have restarted numerous times and even booted UNRAID GUI mode. I got one successful startup and the GUI was accessible. Now every time I try I cant get to it. Any tips where I should start looking. I suspect something faulty on the mainboard perhaps? Thanks, Dwarfboysim

Hi, Will you be applying the latest Palworld update to the server Docker? Kind Regards, Greg

Hi all, Is there a backup taken of the server game. Joined my server this morning and the world has reverted to about 7 days earlier? Thanks, Dwarfboysim