montgomery

Hi all, I have been ripping my hair out trying to fix this over the last few days. I changed my router from the default EE Smart ISP router to a Cudy WR300 (PPPoe was detected) and I suddenly lost all internet to the server despite all setting being the same as the old router. (things like the unraid App Store and dockers have no internet but I'm still able to access my home assistant VM from Nabu Casa) After much troubleshooting, it will work for a little bit then disconnect but then work for a little while if I reboot the router only to then fix again. I have tried everything on all forums and chatbots but no avail. The set up and what I've tried: Cudy router with Adguard DNS (tried with adguard, 1.1.1.1, 8.8.8.8 etc - always the same issue) Unraid network DNS is 1.1.1.1 & 1.0.0.1 in DHCP (tried everything you can think of) Turned off ipv6 as a recommendation (despite dual stack working with EE router) Removed and re-added tailscale I am completely lost on this and the issue is above me, would really appreciate any help possible, happy to send any logs or details and that might help - diagnostics attached. Thank you! oldheart-diagnostics-20251215-2309.zip

updated diagnostics after running the command. I also needed to run umount /mnt/cache_recover as "/dev/sde1 is currently mounted" after doing both of these things, the drives are back and docker & VMs have returned. Reliably do you think? Or deep issue that needs fixing? oldheart-diagnostics-20250516-1802.zip

My HA VM had a few issues so I rebooted my Unraid system. Once back online, my cache drives have been showing as "Unmountable: Unsupported or no file system". I had made no changes to the system or drives, it just seemed to happen. Any advice, please? Diagnostics attached. oldheart-diagnostics-20250516-1722.zip

I'm getting various and constant errors in the logs relating to BTRFS. For example: kernel: BTRFS error (device sdb1: state EAL): parent transid verify failed on logical 862404608 mirror 2 wanted 136104 found 136051 BTRFS error (device loop3): bdev /dev/loop3 errs: wr 1, rd 0, flush 0, corrupt 0, gen 0 BTRFS error (device loop2): bdev /dev/loop2 errs: wr 5, rd 0, flush 0, corrupt 0, gen 0 Nov 12 17:11:57 OldHeart kernel: I/O error, dev loop2, sector 25928256 op 0x1:(WRITE) flags 0x1800 phys_seg 12 prio class 2 kernel: loop: Write error at byte offset 13275267072, length 4096. I've attached my diagnostic files for the full information. What do you think is causing this? I'm unable to use anything. (I fairly new and don't know a lot about all this but can follow instructions) Thank you very much in advance! oldheart-diagnostics-20241113-1203.zip