FireMcFly

So, found the culprit. ProTip: Always check twice if you click on "Save" somewhere. otherwise you might have a cronjob stuck on 5 min repeat instead of once a day...

Hi Prawcess, we should give maintainer their time. They doing it often in their spare time and we benefit from their work for free. Thanks for the tip, but what has a Torrent VPN in common with Veracrypt? :nightly-2026-05-11 build works, just change the repository to dcflachs/veracrypt-gui:nightly-2026-05-11 in the docker template and pull the container again. And refer from updating for a while;)

I have the very same error

That are all valid points and I'm now on cleaning things up

I had to uninstall my long running folderview for troubleshooting things and I can´t find my Backup. So running it from scratch now and I am a little bit confused: I created one docker folder and put dockers in it. So how to create other docker folders now? Buttons gone after the first folder

I noticed the same issue on my machine. And it clearly worked for monthsStopped all containers except 2 crucial ones, stopped all VM's. No stream activity, no disk or share activity on the array is shown in the respective Dynamix plugins. Noticed a lot of {"level":"warn","error":"open_by_handle_at failed: stale NFS file handle","time":1782372033,"message":"Failed to resolve directory path from file handle"} errors, so deactivated NFS share completely. Removed 13 plugins and kept only the very important and common ones: Appdata Backup, Community Apps, Intel GPU-Top, Intel GVT-G, Unassigned devices, Unassigned Devices +, Unraid Connect and User script. Never had ZFS But all for nothing, drives won´t stay spun down, sometimes won´t even spin down if I force them to tower-diagnostics-20260625-0901.zip

Had something similiar in the past. Updated the Plugin and ComfyUi stopped working. It was the newest driver version that caused it. Go into the Plugin and try with an older driver version. Reboot required.

Great hint, helped me alot. Somehow I overlook the whole userscript thing. Thanks:)

Hi all, for the life of me I can´t get sageattention installed. And Iḿ not shy to admit that I am not the sharpest knive in the drawer regarding to Linux, env and compiling. I tried pip3 install (error: externally-managed-environment), gitclone (ModuleNotFoundError: No module named 'torch'), creating a new venv (ERROR: Could not install packages due to an OSError: [Errno 13] Permission denied: '/SageAttention/.env_lin/lib/python3.12/site-packages/trampoline') but nothing worked out. Can anybody point me to a good manual for this or help in any other way? Any hint is much appreciated!

I found the issue. The ident.cfg contained manual set ports. And it seems that the fritz.box is binding port-forwarding strictly to the MAC Adress and not to the IP. So with the new networkcard it tried to reach the webgui on the standard and therefore wrong port. Thanks for your help and pointing me into the right direction.

Sorry for the delay. Created a new USB Stick with a trial install, Webgui reachable first try, same IP. Booted original stick again, no webgui. So there is something on the original stick that prevents the webgui access. Or the webgui itself. What could it be? As said, gui worked fine on the old system. tower-diagnostics-20241124-1217.zip

Good idea. Will take a few days because I only own 1 USB stick atm

To sort things out I assigned in DHCP 192.168.0.110 to an non-existing device. Rebooted server, it now got 192.168.0.111 but still no webgui

OK, it took a little bit. Renamed to network.old, rebooted, same IP. Checked the route again, deleted existing connection, rebooted router, rebooted server, still the same story. Here the diagnostics tower-diagnostics-20241123-1553.zip

Greetings, I like to ask the pros about an issue I ran in: I can´t access my server via webgui or ssh. History My system ran stable for several months and it was time to upgrade Unraid. Started upgrade, rebooted and parity became disabled. Shutdown, checked the disk on bios level, everything fine so far on an extended SMART-Test. Reboot, still disabled. OK, ordering a new disk, crap happens Two days later Disk 2 started to fail with read-errors. Ok, another shutdown, another SMART-Test. But disk 2 appears to be fine, too. Hmm. Digging through Internet and posts with the result that it could be anything from faulty power supply to misfortune. System was AMD Ryzen and pre-pandemic, power supply even far older, why not building up from scratch I thougth New hardware specs: Intel Core i3-12100 MSI B760 Gaming Plus WiFi DDR 4 NZXT C850 Gold GTX 1070 (used from Ebay) LSI 9300-8i IT mode (used from Ebay) kept the RAM Kingsten Fury 4x 32GB Assembled everything and booted. Looked good, server booting, couldn´t see any issues. Ready with the same ip as before, 192.168.0.110. That was the first strange thing because there was no ip reservation at all, should have gotten a new one from DHCP Powerdown, reboot without network cable, 169.254..., seems correct. Reboot again with network cable, 192.168.0.110 Checked router (Fritzbox) TOWER appears twice with old and new connection, both but different MAC. Powerdown, deleted both, restarted server. One connection named TOWER with 192.168.0.110 active Seemed good so far, right? But I can´t access the Webgui. I can´t SSH, not even ping it. Old board had two network cards so theoretically there could be a 192.168.0.111 but alas, same result. Created diagnostics.zip, checked it line for line but at least for me nothing seems to be out of the ordinary. And now I´m flabbergasted. I´m a Windows tech for 25 years but on Linux I´m merely a slightly experienced noob. So I politly like to ask you for help and recommendations. Especially if I´m missing something dead obvious the whole time. tower-diagnostics-20241123-1952.zip