trivi

Did you find a solution? I do have the same probelem

Can't post it as code, so I attached a file. modprobe nct6775 modprobe: ERROR: could not insert 'nct6775': No such device sensors-detect.txt

Thank you. I did run modprobe: modprobe: FATAL: Module NCT6775 not found in directory /lib/modules/6.6.68-Unraid Is this a driver problem? And there is no fan controller detected in the system temp app: EDIT: If I run modprobe ftsteutates, then there are the pwm sensors listed, if I run sensors: coretemp-isa-0000 Adapter: ISA adapter CPU Temp: +36.0°C (high = +80.0°C, crit = +100.0°C) Core 0: +33.0°C (high = +80.0°C, crit = +100.0°C) Core 1: +32.0°C (high = +80.0°C, crit = +100.0°C) Core 2: +32.0°C (high = +80.0°C, crit = +100.0°C) Core 3: +37.0°C (high = +80.0°C, crit = +100.0°C) pch_cannonlake-virtual-0 Adapter: Virtual device MB Temp: +34.0°C ftsteutates-i2c-0-73 Adapter: SMBus I801 adapter at efa0 in0: 3.00 V in1: 3.04 V in2: 3.09 V in3: 2.73 V fan1: 600 RPM fan2: 840 RPM fan3: 840 RPM fan4: FAULT fan5: FAULT fan6: FAULT fan7: FAULT fan8: FAULT temp1: +34.0°C temp2: +25.0°C temp3: +28.0°C temp4: +25.0°C temp5: +25.0°C temp6: +33.0°C temp7: FAULT temp8: FAULT temp9: FAULT temp10: FAULT temp11: FAULT temp12: FAULT temp13: FAULT temp14: FAULT temp15: FAULT temp16: FAULT nvme-pci-0300 Adapter: PCI adapter Composite: +30.9°C (low = -0.1°C, high = +71.8°C) (crit = +89.8°C) Then system temp detects the pwm controller, but fan control still does not.

I don't know how to get Fan Auto Control working. There is no pwm controller detected. I have a FUJITSU D3644-B1 mainboard. sensors-detect outputs the following line, so I did a little research, but did not find any solution: Found `Nuvoton NCT6796D Super IO Sensors' (but not activated) Does anybody have a solution for this? Thanks!