Gloaf

Welp seem to have inadvertantly solved this issue. I moved appdata and system to a SSD cache and reinstalled all dockers and somehow i lost the error message and am no longer having any issues.

Seems ive solved all my issues I simply had to reinstall the dockers and all the settings and stuff automatically populated it also solved my other issue I posted about the other day as I was having error messages in both sonarr and radarr and now both are gone.

I researched this a bunch before attempting but every resource I found seems to have been referring to pre 7 unraid and I think the process changed. Nevertheless I figured with a backup at worst I would be able to restore and keep rolling boy was I wrong. Help please. My appdata and system folders both existed on the main array and I was worried that having them on the array was causing slowdowns and generally it seems most people offload them onto a SSD cache drive. I have a 256GB SSD cache drive and I have it setup in its own pool. After moving everthing to the cache drive I see the files existing but none of my dockers show up and theres a new MNT folder that has been created on the cache drive that didnt previously exist. Heres the steps I performed. (mostly followed existing resources however some difference based on none existent options. or I screwed up.) 1. backed everything up 2. Stop Dockers and disabled both docker and VM services. 3. Setup the SSD as its own cache. Setup the parameters in Appdata and System Shares to use the new cache and nothing else. (This is where I differed from existing resources as the existing resoursces say to select prefer cache although that option doesnt exist anymore.) 4. Attempted to use mover to move appdata and system but it didnt seem to work. 5. Found a resource stating to manually move the folders so I moved them all too the new drive. 6. Confirmed all 60GB of data exist and files look intact. 7. Restarted Array. 8. Under the docker tab now it states no dockers are installed. I restarted the entire server and didnt notice it before but now on the array a MNT folder exists with a appdata folder inside it. Tried restoring from backup and still not working. Im a bit confused. If someone would help me or poissibly remote into my system to assist I would be greatly appreciative. Im sure this is a classic PEBKAC. If I have to reinstall all the dockers I guess its not that big of a deal just frustrating as everything was working and im worried it may not on second attempt to set it up.

yes i see all my movies in radarr and tv shows in sonarr. For giggles I tried putting it back the way it was working before and now its all moving correctly and working its just popping up that error in radarr and sonarr again. Im at a loss i either have a working system with error messages but when i correct those error messages nothing is moved to the correct folders. I feel like this is the classic PEBKAC but im just at a loss as to what ive done wrong.

heres the one from SAB docker run -d --name='sabnzbd' --net='bridge' --pids-limit 2048 -e TZ="America/Los_Angeles" -e HOST_OS="Unraid" -e HOST_HOSTNAME="Skynet" -e HOST_CONTAINERNAME="sabnzbd" -e 'PUID'='99' -e 'PGID'='100' -e 'UMASK'='022' -l net.unraid.docker.managed=dockerman -l net.unraid.docker.webui='http://[IP]:[PORT:8080]' -l net.unraid.docker.icon='https://raw.githubusercontent.com/linuxserver/docker-templates/master/linuxserver.io/img/sabnzbd-logo.png' -p '8080:8080/tcp' -v '/mnt/user/Skynet/incomplete-downloads/':'/incomplete-downloads':'rw' -v '/mnt/user/Skynet/downloads/':'/downloads':'rw' -v '/mnt/user/appdata/sabnzbd':'/config':'rw' 'lscr.io/linuxserver/sabnzbd:latest' 4461c97fd36cd675c53c90ece471170cdfdec51327c68af9ea66c28cdc8f2bdf The command finished successfully!

Ok I think this is what you want? docker create --name='radarr' --net='bridge' --pids-limit 2048 -e TZ="America/Los_Angeles" -e HOST_OS="Unraid" -e HOST_HOSTNAME="Skynet" -e HOST_CONTAINERNAME="radarr" -e 'PUID'='99' -e 'PGID'='100' -e 'UMASK'='022' -l net.unraid.docker.managed=dockerman -l net.unraid.docker.webui='http://[IP]:[PORT:7878]/system/status' -l net.unraid.docker.icon='https://raw.githubusercontent.com/linuxserver/docker-templates/master/linuxserver.io/img/radarr-logo.png' -p '7878:7878/tcp' -v '/mnt/user/Skynet/Movies/':'/movies':'rw' -v '/mnt/user/Skynet/downloads/':'/downloads':'rw' -v '/mnt/user/appdata/radarr':'/config':'rw' 'lscr.io/linuxserver/radarr:latest' d864e148f0dac13a26e652c6cbf994cb1fa722004c04e507666de81671b61da0 The command finished successfully!

I see you linked me to a tutorial ill get to work on this

I hate to even ask this but I dont know how to do that im a noob to all this. Ill do some research see if I can figure it out

Ok that makes sense and I think I corrected my issue also I was reading that you dont want yout path that SAB downloads too in the root so I moved it still having radarr and sonarr poiting to my main library only problem is now they arent moving the files once SAB is done downloading.

So I was following a Trash guide made some changes to my setup and it broke everything. I restored from my docker backup and now radarr and sonarr are giving me an error that sabnzb is using a folder that doesnt exist. The issue though is everything is working SAB will download the files and unpack them into my main movie or tv directory. heres the message from radarr "You are using docker; download client SABnzbd places downloads in /config/Downloads/complete/Movies but this directory does not appear to exist inside the container. Review your remote path mappings and container volume settings." Im very confused on the container pathing and ive read a bunch of different posts and found videos and it still isnt clicking im not sure what to do if anyone could help I would be greatly appreciative.

I tried this last night and couldnt get it to work unfortunatly im just going to try some slower min rpm fans

its ok i ordered some new fans that have higher minimum rpms maybe that will solve the issue otherwise idk what to do im at a loss

i tried it like this with fan control enabled and disabled seems to be fans stuck on full no matter which way its set.

Cleared the log. Set fans to full, then set back to optimal no change in speed they are still maxed out, nothing in event log. Like i was saying we seemed to have solved the ramp up and down in speed with the 140 change in config file but now there is something making them max out regardless of which speed i set them to or what setting change i make. I attempted restarting server and during boot the fans are slow but once unraid starts up they max out making me think something in unraid is doing this.

Ok both of those worked however the fan speed is still maxed and when I change fan speed in BMC I can hear it slow down and then immediatly ramp back up. But now its not giving the low speed critical error so something else is causing the fan speed to max out now. Ugh one peg down another pops up. I appreciate your help btw

Ive tried every value like the noctura fans have a minimum rpm of 300 and trying that gives an error ive tried 400 ive tried 415 ive tried 100 ive tried 0 and null and none and almosty every number i can think of the only thing it takes is 420.000000

Ok thank you finally this helped I got the ipmi tools installed and i see in the config file a section for fan control its FAN2 and FANA that are causing the issues. Heres what the config file shows Section 808_FAN2 ## Possible values: Yes/No Enable_All_Event_Messages Yes ## Possible values: Yes/No Enable_Scanning_On_This_Sensor Yes ## Possible values: Yes/No Enable_Assertion_Event_Lower_Critical_Going_Low Yes ## Possible values: Yes/No Enable_Deassertion_Event_Lower_Critical_Going_Low Yes ## Give valid input for sensor type = Fan; units = RPM Lower_Critical_Threshold 420.000000 ## Give valid input for sensor type = Fan; units = RPM; 'None' to not use hysteresis Positive_Going_Threshold_Hysteresis 140.000000 ## Give valid input for sensor type = Fan; units = RPM; 'None' to not use hysteresis Negative_Going_Threshold_Hysteresis 140.000000 My issue now is on changing the lower critical threshold which is what im assuming I need to change it says its a invalid number no matter what number I put. Ive tried changing the assertion and deassertion events to off but it just makes all fans go to 100% and never slower. I dont know what else to try and change.

Im having trouble figuring out how to intall the IPMI plugins though thats the issue the bmc has no option for intalling IPMI plugins and the terminal I get after launchig into unraid doesnt allow IPMI controls. Im also not great with linux and installing a program through terminal is way above my head.

Supermicro CSE-846 chassis Supermicro MBDH12SSLCO Mobo CUP cooler with 2x noctura fans I have searched and searched and come to the conclusion that maybe people on this forums can help me. I have attempted most of the searched fixes to no resolution. The issue Im having I believe is the Noctura fans run at a speed so low that the motherboard detects a fault and ramps speed to 100% then seeing 100% it lowers speed back to normal noctura range which seems to be below normal Supermicro speeds inducing the fault again. The strange thing is I ran for a week without this issue popping up till it happened in the middle of the night (why do these issues always pop up in the most inconvenient times?). I have tried setting fan speeds in BMC which only has 4 options full, normal, optimal, and heavy I/O load. the only one that helps is full but its so loud and not the speed I feel comfortable running all the time. I have tried using the BIOS but there are no fan speed controls in the BIOS. There are bunch of posts of people reccomending various IPMI tools but I cannot find a tool that I can either get running or one that works with my setup. I feel at a loss and my only options at this point are to buy different fans that wont run at such low RPM or somehow find someone to help me create a custom IPMI Config file as the BMC allows you to download the IPMI file and then upload a new one. Im not the most savy tech user and creating my own IPMI config file is above the limit of my abilities. Im also not the best with linux in general and using command line has me at a loss.

Howdy, Im new to Unraid but Ive been researching things for the past year while I aquire parts and knowledge. Im an avid Plex user as well as sometimes gamer mainly playing coop games with some buddies of mine online. I decided I needed a NAS build as my current setup is capped having over 50TB of stuff ive collected over the years so heres my plan. Case: Supermicro CSE-846BE1C-R920B (Already have) MOBO: ASRock Rack ROMED8-2T/BCM (Already have) CPU: AMD EPYC 7002 16-core (Already have) RAM: 256GB ECC RAM (Already have) Storage: 24x 10TB drives (Have some) Cache: 2x 1TB-NVME or 2x 2TB-SSD (Already have) HBA Card: LSI-9300-8i or I also have a LSI SAS3224 (My understanding is with the case having a backplane Ill only need one channel on the HBA so the LSI SAS3224 is really super overkill and the 9300-8i is fine either way I have both already) I also have all kinds of networking equipment basically anything I need available due to my job. Ive aquired most of the things listed minus about 12 of the drives which I plan on adding over time. I understand that Unraid can spin up game servers and that will be a feature I plan on using. I know some of this may be overkill but it was either free or hard deals to pass up. Anyway thanks for any insight as to my plan.