WazzleUK

Wow, I can't believe I messed that up. I had it on a new line instead of on one line like that. The parity check has been running for 35 minutes without an error, so it looks like this is resolved now. Thanks so much for your help, have a beer on me

Here's the output, thank you lsusb -vt /: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=uhci_hcd/2p, 12M ID 1d6b:0001 Linux Foundation 1.1 root hub |__ Port 001: Dev 002, If 0, Class=Human Interface Device, Driver=usbhid, 12M ID 0627:0001 Adomax Technology Co., Ltd /: Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/15p, 480M ID 1d6b:0002 Linux Foundation 2.0 root hub |__ Port 001: Dev 002, If 0, Class=Mass Storage, Driver=usb-storage, 480M ID 048d:1172 Integrated Technology Express, Inc. Flash Drive /: Bus 003.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/15p, 5000M ID 1d6b:0003 Linux Foundation 3.0 root hub |__ Port 002: Dev 002, If 0, Class=Mass Storage, Driver=uas, 5000M ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge |__ Port 003: Dev 003, If 0, Class=Mass Storage, Driver=uas, 5000M ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge |__ Port 004: Dev 004, If 0, Class=Mass Storage, Driver=uas, 5000M ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge |__ Port 005: Dev 005, If 0, Class=Mass Storage, Driver=uas, 5000M ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge

I've been using Unraid for a few months with a 4 bay external USB enclosure and everything has been running fine. I recently upgraded to version 7.0.1 and Unraid is now crashing during a parity check. Most of the time it crashes within a minute or two, the longest I've had it run is 20 minutes. A SMART test of all drives has come back ok, so I don't think they're the problem. I have syslog server set up to send logs to an instance of Graylog I have running, and I regularly get errors like the following: sd 1:0:0:0: [sda] tag#16 CDB: opcode=0x88 88 00 00 00 00 00 01 13 91 98 00 00 04 00 00 0 sd 1:0:0:0: [sda] tag#15 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD IN sd 1:0:0:0: [sda] tag#15 CDB: opcode=0x88 88 00 00 00 00 00 01 13 8d 98 00 00 04 00 00 00 sd 1:0:0:0: [sda] tag#14 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN scsi host1: uas_eh_device_reset_handler start usb 3-2: reset SuperSpeed USB device number 2 using xhci_hcd scsi host1: uas_eh_device_reset_handler success While this happens, the speed of the parity check completely drops and the temperature of some of my drives shows as *. If it reset successfully (as per the example above), it picks back up, but will eventually happen again. When it doesn't reset the device successfully, it crashes the whole machine. While these errors are happening, it maxes out the CPU at 100%. I've tried setting this in my syslinux config, which matches the ID of my USB enclosure, but that hasn't helped. usb_storage.quirks=174c:55aa:u Everything seems to work fine up until I run a parity check. I only use Unraid for storage, so it's a pretty simple installation as Docker is disabled. I've attached my diagnostics if anybody is free to help. Thank you very much. unmox-diagnostics-20250315-0040.zip

Thanks for all your hard work on this plugin. I'm having trouble excluding directories. The directory I want to exclude has a space in it, which I've tried escaping, but it won't work. I've also tried a directory without a space and that didn't work. E.g. I've tried: share-name/directory name share-name/directory\ name share-name/directory-name and /share-name/directory name /share-name/directory\ name /share-name/directory-name As an alternative, I tried excluding an entire share, which didn't work. I've restarted the recycle bin and can't think of anything else to try, it just doesn't seem to save my settings. I even disabled the recycle bin, stopped it and uninstalled the plugin, then deleted the recycle bin folder and whenever I deleted something, the folder would reappear with the deleted files inside. Please can you assist?