omegajvn

Thank you for the reply! I have disabled C-states and set the typical current idle. I’ve even set my ram to 3200 instead of the 3600 that it is rated for. I do have an under volt going, so I might try and disable that and maybe set a constant voltage while it is rebuilding. I will have to look into all those other.Ryzen utilities in that page.

Hello all. I'm new to Unraid. In my array, I have one 20TB parity drive and nine 4TB drives. I'm trying to upgrade the 4TB drives to 12TB drives. However, I've replaced one of the 4TB drives with a 12TB drive and during the rebuild, it keeps freezing and becoming unresponsive. If I access from a different computer, it loses connection. If I'm connected to the server with a monitor/keyboard, the GUI freezes. It's random when it happens, at 5%, 20%, 7%, whenever. I've done memtest86 and I know the memory is good. The cpu is new as I just bought it less than 6 months ago. I have NO problems with the system, except during data rebuild. I know that when the system had Windows installed to it, my corsair command xt fan controller hub was constantly disconnecting and reconnecting. Would that do anything during a rebuild? The commander xt shows up alot in logs. I've tried to run it in Safe mode with the rebuild as well and it still locked up. I've also removed all my bound devices, turned off VMs, turned off Docker as well. Still freezes. Any thoughts? System specs: CPU: Ryzen 9 5950X MoBo: Asrock x570 Taichi RAM: 4x 16GB 3600CL19 Gskill Trident Z Royal running at 3200 MT/s CL18 for stability Raid card: Adaptec 71605 running in HBA mode. GPUs: RTX A6000 x1 for video/image editing in Windows VM, RTX 2080 Ti x1 for Plex transcoding and handbraking

I'm not sure who created this driver add-on, and I don't even know if I'm in the right place for this, but I just wanted to say: THANK YOU SO MUCH!!!!!! I originally bought a Brostrend 5Gbe network card off of Amazon for my windows 11 plex machine. I decided I didn't like windows as a plex server and my buddies and I at work were looking into Unraid, TrueNAS, etc. Decided to go for Unraid for drive flexibility. After getting everything installed, I went to the Brostrend website and they only had Windows drivers. I went to my Amazon order and the page for the NIC even said only for Windows! I was quite sad for a while. I was browsing through the App section of unraid and found an RL8125 driver addon. Kept looking for the RL8126 driver and found it!!! WORKED LIKE A CHARM!!!! Again.................THANK YOUUUUUUUU!!!!!!!!!!!!!!!