Krickis

Oh, awesome! Yeah, did the trick. Still doesn't have the torrents auto-populating. I suppose I can add them back manually, even if it is a hassle, unless someone knows a way to use that fastresume file to just get them all added at once? Edit: Also while I can now access Deluge on the WebUI, I can no longer seem to access via thin client. Both the WebUI and thin client say they are running version 2.2.0 so I don't think it's a version mismatch issue. I have verified the information in the auth file matches the username and password I'm trying to use for the thin client. Edit 2: After updating Unraid, the web UI broke again, but I was able to find the issue at that point was Variable: LAN_NETWORK in the settings, where I needed to change it from 1.0/24 to 0.0/24. This fixed not only the web UI but also the thin client connecting. So I'm all set, and I appreciate the help I got here, just wanted to post the experience for anyone finding this with the same issue!

Hello, I am experiencing a problem with my DelugeVPN app where it will run if VPN is off, but will not run if VPN is on. Additionally, when it runs with VPN off, it does not load any of the torrents I have seeding. These torrent files can be found in the state folder for DelugeVPN, along with fastresume and state files, but they do not load automatically. I am unsure if these issues are related, but they did start at the exact same time. As far as I'm aware, nothing on my end changed before this happened, although obviously something must have. But the docker app was running just fine one day, then suddenly without my actively changing anything with either software or hardware (no system reset or anything) it just stopped working. I've expereicned this before, but the only other time this happened there was a power outage causing an unexpected reset. Last time, I needed to change the ovpn files, but that doesn't seem to be the issue this time (and last time, the issue of not loading the seeding torrents was not present, only the inability to access with VPN turned on). I am attaching what I believe is the required information per Binhex documentation on GitHub. If any other information is needed, I will provide it. My tech knowledge level is not bad, but not advanced either; I can follow instructions, but rarely know where to look for things. Thank you in advance for any help with this! Command Execution.txt supervisord.log

Hello, all, new to Unraid and experiencing a problem with trying to get a SSD up and running as a cache drive. Important note, almost all the hardware here was from a planned PC build that never happened, so while this is the first time it's in use, a lot of it has been sitting in boxes for years, so I wouldn't rule out that the M.2 slot on the motherboard may just not work right. So what's happened is that I assembled the PC, with the only new components being the PSU, one HDD (with plans to buy a couple more if all went well, but only one right now for the sake of testing things), and one M.2 nvme SSD, which is the only thing giving me trouble. When I hooked everything up, I got the standard "unmountable, no file system" message, and I followed guides to format the two drives. The HDD formatted and mounted without issue, the SSD just continues saying "no file system" after any attempt to format it. When I took the array offline to see if there were settings I need to mess with, the cache shows as Missing and lists the drive under the device dropdown, but it is not selectable in the dropdown menu. Pic below. I asked on Reddit as well, and have tried the following: I ran the command 'lsscsi' (which shows the drive in the list) and 'nvme -list' (which does not show the drive). I did a new config, but the same thing happened. I've taken the drive out and put it in a Windows machine, since I want to format it anyway and there is currently no parity to mess up, and the drive works in that PC. Was able to format it and put data on it on Windows, but it won't format on Unraid. The storage drive is working perfectly, and I've got some data on there now. So while I am very happy to do anything that will help format this SSD cache drive, I would prefer not to touch the storage drive (though I can if needed). I'm very new to Unraid and Linux in general, so I'm still learning how to do everything, but it's mostly been going smoothly. As I said in the beginning, this is an old motherboard and it might just be that the M.2 drive on the thing is shot, but I figured I'd check if there are any more steps I should try before jumping to that conclusion. Note that the motherboard only has a single M.2 slot, so while I was able to test the drive on my Windows PC, I cannot test it in another slot on Unraid. I appreciate any and all support with this! nastalgia-diagnostics-20250518-2033.zip