lovingHDTV

I'm seeing more error reports. Ideas? 2021/01/06 13:27:25 [error] 431#431: *4765522 user "root" was not found in "/config/nginx/.htpasswd", client: 37.46.150.24, server: _, request: "GET / HTTP/1.1", host: "<myExternalIP>:443" 2021/01/06 13:27:33 [error] 430#430: *4768442 user "root" was not found in "/config/nginx/.htpasswd", client: 37.46.150.24, server: _, request: "GET / HTTP/1.1", host: "<myExternalIP>:443" 2021/01/06 13:27:54 [error] 431#431: *4770435 user "report" was not found in "/config/nginx/.htpasswd", client: 37.46.150.24 , server: _, request: "GET / HTTP/1.1", host: "<myExternalIP>:443" 2021/01/06 13:28:05 [error] 431#431: *4770753 user "admin" was not found in "/config/nginx/.htpasswd", client: 37.46.150.24, server: _, request: "GET / HTTP/1.1", host: "<myExternalIP>:443" 2021/01/06 13:28:23 [error] 430#430: *4772463 user "admin" was not found in "/config/nginx/.htpasswd", client: 37.46.150.24, server: _, request: "GET / HTTP/1.1", host: "<myExternalIP>:443" 2021/01/06 23:03:22 [crit] 430#430: *403730 SSL_read_early_data() failed (SSL: error:141CF06C:SSL routines:tls_parse_ctos_ke y_share:bad key share) while SSL handshaking, client: 192.241.221.196, server: 0.0.0.0:443 I have no idea what client is 37.46.150.24 david

Today I noticed that nginx is running at ~60% CPU constantly. I do see a lot of these messages in the nginix/error.log 2021/01/05 21:15:50 [error] 431#431: send() failed (111: Connection refused) while resolving, resolver: 127.0.0.11:53 2021/01/05 21:15:50 [error] 430#430: send() failed (111: Connection refused) while resolving, resolver: 127.0.0.11:53 2021/01/05 21:15:55 [error] 431#431: send() failed (111: Connection refused) while resolving, resolver: 127.0.0.11:53 2021/01/05 21:15:55 [error] 430#430: send() failed (111: Connection refused) while resolving, resolver: 127.0.0.11:53 2021/01/05 21:16:00 [error] 431#431: send() failed (111: Connection refused) while resolving, resolver: 127.0.0.11:53 2021/01/05 21:16:00 [error] 430#430: send() failed (111: Connection refused) while resolving, resolver: 127.0.0.11:53 2021/01/05 21:16:05 [error] 431#431: send() failed (111: Connection refused) while resolving, resolver: 127.0.0.11:53 2021/01/05 21:16:05 [error] 430#430: send() failed (111: Connection refused) while resolving, resolver: 127.0.0.11:53 2021/01/05 21:16:10 [error] 431#431: r3.o.lencr.org could not be resolved (110: Operation timed out) while requesting certificate status, responder: r3.o.lencr.org, certificate: "/config/keys/letsencrypt/fullchain.pem" thanks, david

############################################################################################################################ # # # unRAID Server Preclear of disk 31454B4A52525A5A # # Cycle 1 of 1, partition start on sector 64. # # # # # # Step 1 of 5 - Pre-read verification: [27:36:54 @ 100 MB/s] SUCCESS # # Step 2 of 5 - Zeroing the disk: [31:47:24 @ 87 MB/s] SUCCESS # # Step 3 of 5 - Writing unRAID's Preclear signature: SUCCESS # # Step 4 of 5 - Verifying unRAID's Preclear signature: SUCCESS # # Step 5 of 5 - Post-Read verification: FAIL # # # # # # # # # # # # # # # ############################################################################################################################ # Cycle elapsed time: 45:44:54 | Total elapsed time: 45:44:54 # ############################################################################################################################ ############################################################################################################################ # # # S.M.A.R.T. Status (device type: default) # # # # # # ATTRIBUTE INITIAL STATUS # # 5-Reallocated_Sector_Ct 4 - # # 9-Power_On_Hours 57 - # # 194-Temperature_Celsius 34 - # # 196-Reallocated_Event_Count 4 - # # 197-Current_Pending_Sector 8 - # # 198-Offline_Uncorrectable 0 - # # 199-UDMA_CRC_Error_Count 0 - # # # # # # # # # # # ############################################################################################################################ # SMART overall-health self-assessment test result: PASSED # ############################################################################################################################ --> FAIL: Post-Read verification failed. Your drive is not zeroed. I also see an error in the log file Aug 5 11:21:24 tower preclear_disk_31454B4A52525A5A[39727]: Post-Read: dd output: 2581222916096 bytes (2.6 TB, 2.3 TiB) copied, 11381.9 s, 227 MB/s Aug 5 11:21:24 tower preclear_disk_31454B4A52525A5A[39727]: Post-Read: dd output: dd: error reading '/dev/sdl': Input/output error Aug 5 11:21:24 tower preclear_disk_31454B4A52525A5A[39727]: Post-Read: dd output: 1230825+1 records in Aug 5 11:21:24 tower preclear_disk_31454B4A52525A5A[39727]: Post-Read: dd output: 1230825+1 records out Aug 5 11:21:24 tower preclear_disk_31454B4A52525A5A[39727]: Post-Read: dd output: 2581228163072 bytes (2.6 TB, 2.3 TiB) copied, 11391.3 s, 227 MB/s Aug 5 11:21:25 tower preclear_disk_31454B4A52525A5A[39727]: S.M.A.R.T.: 5 Reallocated_Sector_Ct 650 Aug 5 11:21:25 tower preclear_disk_31454B4A52525A5A[39727]: S.M.A.R.T.: 9 Power_On_Hours 103 Aug 5 11:21:25 tower preclear_disk_31454B4A52525A5A[39727]: S.M.A.R.T.: 194 Temperature_Celsius 40 Aug 5 11:21:25 tower preclear_disk_31454B4A52525A5A[39727]: S.M.A.R.T.: 196 Reallocated_Event_Count 650 Aug 5 11:21:25 tower preclear_disk_31454B4A52525A5A[39727]: S.M.A.R.T.: 197 Current_Pending_Sector 8 Aug 5 11:21:25 tower preclear_disk_31454B4A52525A5A[39727]: S.M.A.R.T.: 198 Offline_Uncorrectable 0 Aug 5 11:21:25 tower preclear_disk_31454B4A52525A5A[39727]: S.M.A.R.T.: 199 UDMA_CRC_Error_Count 0 I've run this two times with the same resilts. it is a brand new hgst 10TB druive. ideas? david Edit: as this now has 650 reallocated sectors, after two attempts. I'm just returning the drive.

Nope, never ran a plugin for plex. Just the linuxserverio plex docker. Hence my confusion.

I ran open files. It is a script that runs to tell you what processes have open files. These open files keep the OS from unmounting the drives. I could also run top, ps -aux | grep Plex, any number of ways to see the process. I tried kill -9; kill -15, but the process always got restarted. Dockers were turned off as well, but some daemon was restarting plex. I've seen this a couple times now, when I stop the array before all dockers have finished starting.

UPDATE: I was able to restart the server, even though there were open files. I then let it reboot, start all the dockers, manually stop Plex docker, stop array and it worked. Not sure why Plex docker doesn't behave like everyone else, but I was able to add my new drive. I've noticed recently that my tower has issues unmounting drives. I ran open files and the only open files are from Plex Media Server and tuner, scripts, etc, however dockers has been shutdown by the shutdown process. if I kill the plex media server process it just spawns another one. Making it impossible for me to shut down my array, and I really need to add a new drive to it. So how do I stop plex media server after the docker service has been shutdown? All other dockers behave perfectly, just not Plex. thanks david

I have two subnets that I would like access to. My LAN subnet 192.168.1.0 and AUG subnet 10.10.1.0. Unraid is on the LAN and I can access this fine, however I cannot access the AUG subnet via wireguard. I can access it fine when I'm on my LAN. Can this be done? For clarification: I can ping 10.10.1.116 from the Unraid box, but I cannot get access to it via WG. thanks david

Ok not an issue with Sonarr. Everything works fine if I run through a VPN, or if I setup Sonarr on br.10 or br.20. I think it is something wrong with my new ISP. david

Further playing. In the log file it says: 19-12-13 19:34:59.1|Warn|SkyHookProxy|The operation has timed out.: 'http://skyhook.sonarr.tv/v1/tvdb/search/en/?term=magnum pi' When I put that in my browser, sure enough it times out, but if I put https:// then it works fine. Can I change this from http to https anywhere in the settings? I didn't see it anywhere obvious. david

I played around a bit more, and found that if I move it to the br.10 it can find new shows. I then tried br.0 and assigned it an IP, and that doesn't work. I'm running Version: 6.8.0-rc4, could that be the issue? I know there is an outstanding bug on dockers/vm/ips etc. david

when I try to add a new series it just spins and eventually times out. This worked a couple weeks ago and I don't think I changed anything. I can go to tvdb and search successfully . I tried to search for the tvdbid and that doesn't work either. Any ideas? thanks david

is anyone running this docker in anything other than bridge mode?

I'm trying to move all my dockers to my IOT vlan. I've successfully moved plex, deluge and nzbget. I can access them via their web interfaces fine. I also moved Sonarr and can access its web interface fine. However I cannot get Sonarr to connect to either of the downloaders. I did update the ips to the new ips, they are all on the same subnet. I opened a console into the Sonarr docker and can ping the IPs for the two download clients. Any ideas what I need to do to get Sonarr to be able to connect to the download clients? Essentially I've moved everything from bridge to br0.10. One additional comment: it connects to jackett just fine after I moved jackett as well. thanks david

Ok how do I change that? I don't see that option in the VM settings any longer. I do see the btrfs as 20GB. NM figured it out

OK I changed the disk size from 1GB to 20 and now it created the file. thanks

I'm trying to setup VM for the first time and cannot find the libvirt file. Do I need to download that somewhere? I didn't see that step in the wiki. thanks, david

Nevermind, I found that my .htpasswd was located at /config/nginx/site-confs/.htpasswd. moved it to the correct place and everything started working.

OK I narrowed it down to my password file. If I remove it from the site-confs/default I can access everything internally and externally. If I put in: auth_basic "Restricted"; auth_basic_user_file /config/nginx/.htpasswd; I immediately get a 403 Forbidden message. no chance to even enter the password. I tried Edge, as I hadn't use it and I did get the password prompt before getting the 403 message.

I mistakenly clobbered my letsencrypt docker. Hint don't install two dockers with the same name, even mistakenly. So I started over new and followed the same walk through as I did last time, but things didn't work this time. https://cyanlabs.net/tutorials/the-complete-unraid-reverse-proxy-duck-dns-dynamic-dns-and-letsencrypt-guide/ I filled in the docker just like the tutorial says, but using my data which is also on duckdns.org. It first went wrong after I started the docker and I couldn't even connect to get the "Welcome to our server" message. When I connect to port 81 I get "site cannot be reached, connection refused". I continued, thinking that now I may need more configuration to get it working. After completing the setup and adding a /sonarr subdirectory I still get that message for port 81, but now for port 444 I get a password prompt, which I enter and then it gives me 403 Forbidden NGINIX 1.16.1. I was happy to see the username/password prompt, but the 403 is annoying. It happens for every subdirectory. Any ideas? thanks david

Following: https://blog.linuxserver.io/2017/05/10/installing-nextcloud-on-unraid-with-letsencrypt-reverse-proxy/ When I create the nextcloud file for letsencrypt the bottom has a location section. Nothing in the wording says what to set that to. I'm assuming that should be our nextcloud IP:port? Nextcloud was working until I put in the letsencrypt stuff. Now nextcloud doesn't work and neither does my letsencrypt. thanks david

I've recently had an issue where one of the clients says it needs to re-authenticate OAUTH2 each night. I have another client running that doesn't have this issue. I suspect this isn't a server issue as one client works and one doesn't. The one that does work, is also saying I should update to OAUTH2 version 0.4.0. I think I did this update on the client that doesn't work as it isn't prompting me for the update. Any ideas? I can't find anything in the Owncloud client software to configure anything. thanks david

I must be doing something wrong. when I install it I get: 2019/01/30 21:49:34 main.go:99: ERROR: failed to load config file /etc/oauth2/oauth2_proxy.cfg - open /etc/oauth2/oauth2_proxy.cfg: no such file or directory when I look in the directory where oauth2 is installed it is empty. Nothing got installed.

Sweet, Thanks Sent from my Moto G (5S) Plus using Tapatalk

any update on the future of your Oauth2 Proxy docker? thanks

That was straightforward. thanks for the suggestion