mbryanr

Maybe this will give you what you want, although the drives are tested individually... http://lime-technology.com/forum/index.php?topic=31073.0

Step 4 http://lime-technology.com/forum/index.php?topic=27679.msg244140#msg244140 More info http://lime-technology.com/forum/index.php?topic=30657.msg275742#msg275742

Once you've map the directories to explorer, you could print directory to a txt file. http://support.microsoft.com/kb/321379 or this thread, JoeL utilizes command line to get the list (other software solutions as well) http://lime-technology.com/forum/index.php?topic=21687.msg192517#top

Like this one for the PCI port... http://www.newegg.com/Product/Product.aspx?Item=N82E16833106121

When I saw your post and smart tests originally, I searched for "End to End Error" as it indicates it is "FAILING NOW" (and I have no experience with the new Seagates, and I have one waiting to be installed...) 184 End-to-End_Error 0x0032 098 098 099 Old_age Always FAILING_NOW 2 (the other drive had a raw value of 7) I wouldn't trust Seatools as an indicator of a drive problem, especially if it is only reporting if the smart test "passed", which is not an indicator of a failing drive. Usually a smart test will fail after it is too late to save your data. End-to-End Error- Appears to be an internal memory cache problem, although this seemed to be the most logical explanation:

See you replied while I was typing mine. Was wondering if you were going to see errors once you started a write. Interesting to see what the short test says now.

I'm with you...I'm not a big fan of the Samsung drives, but here is one of my smart reports. Normally, no reallocated or pending sectors is a good indicator. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 57 2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0 3 Spin_Up_Time 0x0023 067 067 025 Pre-fail Always - 10204 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1342 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 2109 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 32 181 Program_Fail_Cnt_Total 0x0022 252 252 000 Old_age Always - 0 191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 5 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0 194 Temperature_Celsius 0x0002 064 063 000 Old_age Always - 19 (Min/Max 15/37) 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 3 223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0 225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1343 It has an error as shown below Error 20 occurred at disk power-on lifetime: 12311 hours (512 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 40 00 3c e2 Error: UNC 8 sectors at LBA = 0x023c0040 = 37486656 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 40 00 3c e2 0a 00:00:40.214 READ DMA 35 00 40 60 14 3b e0 0a 00:00:40.214 WRITE DMA EXT 35 00 00 60 10 3b e0 0a 00:00:40.214 WRITE DMA EXT 35 00 00 60 0c 3b e0 0a 00:00:40.214 WRITE DMA EXT 25 00 40 60 14 3b e0 0a 00:00:40.214 READ DMA EXT[/quote] I would prepare to swap that drive out. Run a long smart test as well.

Try here http://www.newegg.com/SANS-DIGITAL-RAID-Enclosure-Subsystems/BrandSubCat/ID-11118-509 Also search the forum for port multiplier. Sorry, using my phone. Sent from my SAMSUNG-SGH-I337

https://www.google.com/search?q=st3000dm001+high+cycle+count&oq=st3000dm001+high+cycle+count&aqs=chrome..69i57.11440j0j1&sourceid=chrome&espv=210&es_sm=122&ie=UTF-8 Chirping as well? A firmware update will correct the chirp.

Available at Newegg: http://www.newegg.com/Product/Product.aspx?Item=N82E16842101421 Amazon: http://www.amazon.com/gp/product/B0038ZU2FC Normally...$199 or more..

Nice. Got the 4TB Seagate and 3TB WD Red yesterday, but this is definitely a great price deal. Sent from my SAMSUNG-SGH-I337

I'd say it is likely at some point that btrfs will make it to unRAID. http://lime-technology.com/forum/index.php?topic=27226.msg239203#msg239203

I hadn't seen it reported, nor had I encountered the segfault on 4.7 Correct. I remember on v5 that it gave segfault messages, but I could still telnet. I'd try the powerdown in unMenu, and if that doesn't work - the command line described above. It just cleanly stops everything, at which point you can hit the power button (without incurring a parity check on reboot).

v5 will cause a segfault if emhttp is shutdown and restarted. Using 4.7 those commands worked fine. I've used the command line described here to stop the server. http://lime-technology.com/wiki/index.php/Console#To_cleanly_Stop_the_array_from_the_command_line nohup is just a run command even after exiting CLI http://linux.die.net/man/1/nohup

Take a look through this thread, the issue may be the same. http://lime-technology.com/forum/index.php?topic=26412.msg230956#msg230956

http://lime-technology.com/forum/index.php?topic=2057.msg14950#msg14950

Gotta appreciate the cameraman taking just the right shots!

You can continue to utilize the excellent unMENU (and/or SimpleFeatures) in 5.0, without those lines in your go script..they will not be reinstalled upon each reboot. None of the packages or plugins you mentioned are in the stock gui. http://lime-technology.com/forum/index.php?topic=19510.0 I would be careful with duplicating packages/plugins. Particularly ones that use different versions of the same dependencies/libraries. But that is true for any package or plugin regardless if you are using unMENU or SimpleFeatures. If you find you need smartmontools, hdparm, etc - then stay with unMENU. There is not a plugin manager (yet); which can cause problems with startup/shutdown depending on the plugin installed. I have not had an issue with the basic SimpleFeatures plugins (I don't use webserver or sleep).

What was the reason the test was "aborted by host"? The other tests were read failures. Sent from my SAMSUNG-SGH-I897 using Tapatalk 2

A good guide to upgrading to 5.0 from 4.7.. http://lime-technology.com/wiki/index.php/Migrating_from_unRAID_4.7_to_unRAID_5.0 and here is the thread: http://lime-technology.com/forum/index.php?topic=25556.0

Correct. 11a was an interim release to test specific errors for a couple users. Changes from 5.0-rc11 to 5.0-rc11a ---------------------------------- - shfs: return correct extended attribute value length - webGui: for 'FTP user(s)', permit multiple usernames separated by spaces Changes from 5.0-rc10 to 5.0-rc11 --------------------------------- - emhttp: fixed spurious "title not found" log entries - emhttp: ensure new parity disk for 'swap disable' has a valid partition table - emhttp: fixed worker thread (format/clear/copy) inconsistent progress - emhttp: default timeZone "America/Los_Angeles" (eliminate first-boot error message) - flash boot: add menu item to boot kernel limiting memory use to 4GB - linux: use kernel 3.4.26 (for various disk controller and NIC driver bug fixes) - linux: added "Intel PIIX4 and compatible I2C driver" (i2c-piix4) per user request - linux: changed cpufreq drivers from modules to built-ins - shfs: fixed crash by replacing non-thread-safe readdir() with readdir_r() - shfs: use st_ino field to record object disk location - slack: add 10-sec timeout waiting for USB flash to appear as suggested by forum user Barzija - webGui: added very simple vsftp support - webGui: indexer: diplay disk location of objects

I just tried the link as well. No go. This works though: http://download.lime-technology.com/download/

Here is the basics for the card: http://lime-technology.com/forum/index.php?topic=12404.msg117904#msg117904

2 other sellers on ebay have it for 9.99... Or you can contact SuperMicro Part # MCP-240-00073-0N http://ftp.supermicro.com/support/faqs/faq.cfm?faq=14400