JorgeB

Moderators
 View Profile  See their activity

  • Posts

    61472

  • Joined

  • Last visited

  • Days Won

    646

 Content Type 

Everything posted by JorgeB

  1. JorgeB
    Check filesystem on disk1.
  2. JorgeB
    It doesn't look great, but run an extended SMART test, if it passes it's OK for now.
  3. JorgeB
    AFAIK they don't have a temp sensor. Could be, did you try a different PCIe slot?
  4. JorgeB
    Everything looks normal to me, try booting in safe mode, if the same boot with a new flash drive suing a fresh install, no key needed, just to see if it works.
  5. JorgeB
    Post new diags from v6.10.3 to see if the Unraid driver is still crashing.
  6. JorgeB
    Both work fine, Asmedia has an extra port if needed.
  7. JorgeB
    The main possible issue I see is using the GPU on a PCH slot, but try it, it might be enough for what you need.
  8. JorgeB
    With btrfs the file can go through, even when not using FUSE, so likely a Samba issue, you get an i/o when copying locally.
  9. JorgeB
    This looks like a good clue, it's not being pass-though by the controller, I assume it's in RAID mode?
  10. JorgeB
    Delete /boot/config/vfio-pci.cfg (or got to Tools -> Devices and uncheck them) then reboot.
  11. JorgeB
    If it was created with the USB tool it should be OK, but it might be worth testing or running make_bootable again to confirm.
  12. JorgeB
    How did you create the flash drive? If it was manually did you run make_bootable.bat as admin? It's not needed for UEFI boot but it won't boot CSM without running it.
  13. JorgeB
    Both Intel NICs and the Realtek NIC are being passed-trough to VFIO-PCI, is this intended?
  14. JorgeB
    For now I don't see any issues with the pool filesystem, besides the already mentioned data corruption errors, only the docker image went read-only.
  15. JorgeB
    Yes, should be that, might need then to choose the boot devices for that mode.
  16. JorgeB
    Yep
  17. JorgeB
    It's not great, you can try removing it if the issues continue to see if it helps.
  18. JorgeB
    Can't help with that, never had a Dell server, there should be a BIOS option for that.
  19. JorgeB
    Try switching to ipvlan (Settings -> Docker Settings -> Docker custom network type -> ipvlan (advanced view must be enabled, top right)).
  20. JorgeB
    During parity check/sync, disk rebuilds and all writes if turbo write is enabled. It should work fine, unless there's some incompatibility with that board.
  21. JorgeB
    Delete and recreate.
  22. JorgeB
    Unraid does not support Wi-Fi, you can get an AP with client mode support and connected to Unraid via cable.
  23. JorgeB
    Try a different flash drive with a fresh install.
  24. JorgeB
    Diags are after a reboot, and there's still a missing disk, can you get that disk online? Then post new diags after array start.
  25. JorgeB
    Suggest trying with a different Unraid release, like v6.10.3, current kernel might not like your hardware, if the same happens with v6.10.3 then it would suggest a hardware problem.